Wood Dining Chair with a Round Upholstered Seat & Back
The round back cushion is carried above the seat on a shaped dark wood support. The gap between the two upholstered elements keeps the circular back distinct within the frame. Its support profile and connections are itemized with the wood assembly.
High-density foam pads the round cream seat. The fabric reference and cushion build define its texture, edge seams and finished profile. The seat is carried on a fixed wood assembly.
Four sculpted dark wood legs support the seat, with broad blade-like surfaces and a shaped panel rising behind the back. Ash is the specified leg material. The dark finish coordinates the legs with the other wood components.
Cream textured fabric covers the round seat and back. One textile reference keeps their tone and surface character consistent. The accepted textile specification carries composition, care instructions and any required performance evidence.
The dark finish connects the shaped back panel and legs visually. Keep its tone and sheen with the cream fabric reference. Ash leg components and the shaped back assembly are each itemized in the furniture specification.
Seat and back upholstery are scheduled individually on the same chair. Their padding, edge seams and attachment positions define the cushion profiles. Our quote identifies the complete upholstered assembly and any replacement covers requested.
| Configuration | Armless wood dining chair with separate round seat and back cushions |
|---|---|
| Appearance package | Cream textured fabric on the round seat and separate back, foam filling and dark-finished ash legs; the actual fabric and wood finish references stay with the chair order. |
| Legs & other wood components | Ash legs; shaped wood back/support species and joints each specified |
| Listed overall width | 490 mm overall chair width |
| Listed overall depth & height | 520 mm overall depth ×950 mm overall height |
| Upholstery & fill | Cream fabric with high-density foam. |
| Table interface | Armless body; seat height, usable seat depth, table support and pull-back area coordinated with the final layout |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The overall chair measures 490 mm wide, 520 mm deep and 950 mm high in the listed configuration. Use this envelope to position chairs around the table. Seat height, usable seat depth and back angle are separate dimensions for the final chair specification.
The chair has no projecting side arms to coordinate with a table apron. Its round seat and tall back still need to fit the actual table and adjacent seating. Use the full chair width for the layout, then retain the room needed to pull it away from the table.
Group the chairs around the actual table so chair legs, table supports and neighboring seats have their own floor space. The layout retains the route behind seated users. Specify floor-contact fittings for the receiving surface along with the chair assembly.
The chair item identifies the shaped wood supports, ash legs, round seat and separate round back. Keep the overall size with the complete assembly. Dining tables, loose pillows and other furniture are separate products.
The textile reference, padding build and dark wood finish define the material package. Carry these references with the chair quantities and room marks. Any required upholstery test evidence is identified for the actual selected material.
List chair quantities by table or room with one fabric and finish reference. Repeated areas can share a selection while retaining their own packing marks. Spare chairs and any replacement upholstery are separate agreed order lines.
Protective packing and transport follow the actual assembly and packed dimensions. Identify receiving access, floor protection and any local assembly in the delivery plan. The packing schedule lists the supplied components and room allocation.
No. A separate round back sits above the round seat, with a shaped wood panel and support between them. The chair therefore has a taller open back profile than a low continuous upholstered shell.
The leg specification is ash wood. The shaped back panel and other supports are each itemized with their material and joint details. The selected dark finish coordinates the wood components.
The listed size is 49 cm wide, 52 cm deep and 95 cm high, equivalent to 490 ×520 ×950 mm. These are overall chair dimensions. Seat height and usable seat depth are separate specifications.
No swivel mechanism is included in this configuration. The round padded seat sits on a fixed wood support assembly. A rotating seat would require its own specified construction.
The chair is specified with a textured fabric cover. Its fiber content and care instructions are recorded against the actual textile reference. A shearling-hide cover is outside this material package.
Include quantity, table plan, actual seat-height requirement, fabric reference and wood finish. Add the destination and receiving route. Our quotation itemizes the complete chairs, packing, transport and any local assembly.
Wood Armchair with a Wrapped Saddle-Microfiber Seat
Fabric Bar Stool with a Slender Steel Frame
Leather Dining Chair with a Leopard-Pattern Outer Shell
Curved-Back Dining Chair with a Round Seat & Metal Legs