15 × 145 mm Deep Teal Finger Porcelain Mosaic
- Material and format
- Finger porcelain mosaic
- Selected mosaic
- Deep teal porcelain mosaic with 15 × 145 mm slim rectangular chips
- Overall thickness
- 8.5 mm
Our Tile
28 products
19 mm Penny Round Porcelain Mosaic Tiles
- Chip format
- 19 × 19 mm
- Selected mosaic
- Blue gray porcelain penny-round pieces in the listed 19 × 19 mm format on 292 × 320 mm sheets; 6 mm thickness
- Thickness
- 6 mm
300 × 100 mm Matte Ceramic Wall Tiles
- Material
- Ceramic wall tile
- Format
- 1307Y matte ceramic interior wall tile; listed 300 × 100 mm format and 6.5 mm tile thickness. Face appearance, shade and dimensional batch identified for the order.
- Carton coverage
- 1.2 m² listed
45 × 195 mm Warm White Herringbone Porcelain Mosaic
- Material and layout
- Porcelain herringbone mosaic
- Selected mosaic
- Warm white 45 × 195 mm porcelain mosaic in the herringbone sheet configuration
- Overall thickness
- 7 mm
48 × 48 mm Blue Square Porcelain Mosaic Tiles
- Material and format
- Square porcelain mosaic
- Selected mosaic
- 48 × 48 mm blue and aqua square porcelain mosaic on 306 × 306 mm sheets
- Thickness
- 6 mm
51 × 59 mm Hexagon Porcelain Mosaic Tiles
- Chip format
- 51 × 59 mm
- Selected mosaic
- Soft gray 51 × 59 mm-format porcelain hexagon pieces on the selected 325 × 282 mm sheet; 6 mm thickness
- Thickness
- 6 mm
6 mm Limestone-Look Gauged Porcelain Tile Panels
- Selected material
- Porcelain ceramic wall panel
- Selected porcelain panel format
- 1200 × 2800 × 6 mm · 3.36 m² gross face
- Selected face
- Warm-beige limestone-look glazed matte
600 × 1200 mm Matte Terrazzo-Look Floor Tiles
- Tile format
- 600 × 1200 × 10 mm
- Selected surface
- Anthracite terrazzo-look tile with a matte structured granular surface
- Design faces
- 10
800 × 800 mm Polished Porcelain Floor Tiles
- Material
- Glazed porcelain
- Format
- 8L8004 glazed porcelain tile, listed 800 × 800 mm format and 10 mm thickness, with a polished surface. Shade and dimensional batch identified for the order.
- Carton coverage
- 1.92 m² listed
Blue & White Square Glass Pool Mosaic Tiles
- Material
- Glass mosaic
- Selected blend
- Specified blue, teal and white square glass mosaic: 25 × 25 × 4 mm chips, 2 mm design joints and an 11 × 11 face-paper-mounted module. Pool-wall and waterline use requires a compatible submerged setting system; floor and step use is separate.
- Pattern
- Square blend
Blue Porcelain Waterline Tiles with Matching Corner Pieces
- Selected material
- Gloss dark-blue glazed porcelain for pool waterline design
- Waterline tile profile
- Gloss blue flat porcelain ·150 W × 75 H × 8 T mm
- Selected corner legs/height
- 75 × 75 mm nominal plan legs; 75 mm high
Bookmatched Porcelain Wall Panel Pair Sets
- Panel body and face
- 9 mm porcelain with paired mirrored marble-look print
- Panel size and pair width
- Two 1200 W ×2700 H ×9 T mm panels ·2402 mm pair width ·6.48 m² face
- Central-joint requirement
- 2 mm clear joint between A/B panels
Ceramic & Porcelain Tile Baseboards
- Profile
- Flat wall-base tile
- Ceramic or porcelain
- Ceramic tile baseboard with a flat face; dark appearance shown
- Nominal formats
- 4 x 24 / 6 x 24 / 4 x 36 in
Chevron Wood-Look Porcelain Floor Tiles
- Tile construction
- Glazed porcelain with matte oak-look printed face
- Matched piece size
- 600 long edge × 100 perpendicular width × 10 T mm · left/right pair
- End geometry
- 45° end cuts; paired left/right parallelogram pieces
Flamed Gray Granite Paving Slabs with Sawn Edges
- Selected stone
- Natural gray granite with granular mineral appearance
- Face format and stone thickness
- 600 L × 300 W × 30 T mm ·flamed gray granite
- Selected top finish
- Flamed
Fluted Glazed Ceramic Wall Tiles with Three Rounded Ribs
- Tile construction
- Glazed ceramic with a flat back and raised longitudinal face
- Tile component
- 50 × 300 × 12 mm · three longitudinal ribs
- Rib arrangement
- Three convex ribs along the 300 mm length
Hand-Painted Ceramic Wall Tile Rosette Sets
- Tile construction
- Glazed ceramic with hand-painted cobalt-blue and terracotta motifs
- Pattern or border component
- 4 × 150 × 150 × 8 mm motif tiles · one oriented set
- Pattern arrangement
- Four oriented tiles form one centered rosette
Interlocking Porcelain Deck Tiles on Drainage Grids
- Selected assembly
- Porcelain face on a polypropylene interlocking drainage grid
- Porcelain face and matched grid format
- 300 × 300 mm porcelain face ·20 mm tile +10 mm clip grid
- Selected clip grid
- 10 mm black polypropylene;matched ribs and interlocking edge tabs
Pedestal-Supported Porcelain Terrace Paver Kits
- Paver size
- 600 × 600 × 20 mm porcelain paver.
- Pedestal support-height range
- 600 × 600 × 20 mm porcelain pavers with 40–70 mm adjustable support height to the paver underside, including head and bearing pad; 60–90 mm finished height.
- Joint requirement
- 4 mm open joints between neighboring full pavers.
Porcelain Terrace Step Tread and Riser Sets
- Step finish material
- Textured gray stone-look porcelain; 20 mm tread and riser
- Tread and riser width
- 1200 × 350 × 20 mm tread +1200 × 150 × 20 mm riser
- Riser face height
- 150 mm beneath the tread underside
Porcelain-Faced Aluminum Honeycomb Wall Panels
- Panel construction
- Matte light-stone-look porcelain bonded to aluminum honeycomb sandwich
- Panel format
- 1200 W × 2400 H × 20 panel T mm
- Layer stack, front to rear
- 6 porcelain +1 bond +0.8 front skin +11.4 honeycomb +0.8 rear skin =20 mm
Rounded-Nose Porcelain Pool Coping Tiles
- Coping material and face
- Through-body warm-gray porcelain; matte textured top
- Coping component
- 600 L × 300 D × 20 T mm · square end cuts
- Rounded nose
- R 10 full rounded profile along the water-facing edge
Slotted Porcelain Pool Overflow Grating Tiles
- Grate material
- Textured gray porcelain; 25 mm body requirement
- Grate depth and slot length
- 300 L ×250 D ×25 T mm ·six 180 mm through-slots
- Slot pattern
- Six through-slots, 10 mm wide with R5 ends
Textured Porcelain Patio Pavers, 12–20 mm
- Material
- Porcelain outdoor pavers
- Paver thickness
- 20 mm porcelain paver; selected format, support system and outdoor application confirmed for the order
- Surface
- Textured stone-look face
Textured Through-Body Gray Porcelain Pool-Floor Mosaic
- Selected material
- Gray textured matte unglazed through-body porcelain on mesh
- Mesh format and installed module
- 144 gray unglazed chips ·300 × 300 mm installed module
- Selected joint
- 2 mm clear gap; 25 mm chip-and-joint pitch
Unglazed Large Hexagon Porcelain Floor Tiles
- Tile body and face
- Unglazed through-body porcelain; gray fine-textured matte face
- Flat-to-flat tile format
- 300 mm flat-to-flat ·346.4 mm corner span ·9 mm thick
- Main corner-to-corner span
- Approximately 346.4 mm on 300 mm flat-to-flat tile
Unglazed Red Quarry Floor Tile
- Selected tile construction
- Through-body unglazed clay quarry tile
- Configuration
- Burnt-red through-body clay
- Selected face
- Matte plain square; no decorative glaze
Warm Beige Ceramic Bullnose Wall Tile Trim
- Body
- Glazed ceramic
- Selected trim
- Warm beige satin-glazed ceramic bullnose, using the 8mm ceramic-body configuration. Face format, rounded-edge direction, radius, corner pieces and field-tile match are selected for the layout.
- Edge
- Rounded bullnose
No products match your search.
Tile Ranges by Surface & Location
Floor & Wall Field Tile
Large porcelain floor formats, hexagons, chevrons and terrazzo-look tiles cover floors; matte, fluted and hand-painted ceramics dress the walls. We keep floor and wall products to their intended use and set out the joints with you.
Outdoor Paving
Porcelain patio pavers, flamed granite slabs, interlocking deck tiles and pedestal-supported pavers cover terraces and paths. We choose the paving together with drainage, edges and steps.
Pool Finishes
Waterline tile, textured pool-floor mosaics and coping are each made for their place in the pool. We confirm which slip and water-absorption reports are available for the series you order.
Mosaics & Large Panels
Small mosaics bring color and texture to feature walls and pools; large-format panels cover walls and floors with very few joints.
Tile Bodies, Faces & Mounted Modules
Ceramic & Porcelain Bodies
Where your project names a standard such as EN 14411, we confirm the series documents against it. Stone-look and wood-look names describe the face; the body is always porcelain or ceramic.
Glazed, Polished & Textured Faces
Glazed, polished, matte and textured faces each reflect light differently. For wet and commercial floors, tell us the DCOF or R rating you need and we confirm which tiles have a matching slip report.
Mounting & Edge Components
Mosaic sheets, trims, coping and paver supports are supplied with the field tile they belong to.
Tile Finish Schedule Parameters
| Detail | What we need from you | Why it matters |
|---|---|---|
| Location and use | Room, wall, floor, outdoor or pool location | Keeps products to their intended use. |
| Format and repeat | Tile size and joint width you want | Sets pattern and cutting layout. |
| Body and build-up | Floor or wall build-up | Sets thresholds and trims. |
| Surface and evidence | Slip or frost requirements | Lets us confirm which test reports are available. |
| Edges and transitions | Edges, steps, skirting and coping | Completes every edge as well as the field. |
| Area and spare quantity | Areas by room and spare stock wanted | Makes the order quantity traceable. |
Tile Field, Edge & Transition Items
Field finish
- Product and shade
- Size, direction and joints
- Room or surface quantities
Perimeters and details
- Trim and finished ends
- Corners, coping or step pieces
- Drain and adjoining-finish transitions
Installation interfaces
- Adhesive and grout recommendations
- Substrate and complete level build-up
- Supports for raised paving systems
Tile Quote Factors
Material & Format
Field tile, stone pavers, mosaics and large panels are made and handled differently. Compare the same material and size.
Cutting & Pattern
Diagonal, chevron and shaped layouts waste more in cutting, so we work out quantities from your layout.
Edges & Special Pieces
Corners, bullnose, coping and skirting are counted by length and number instead of square meter.
Batch & Packing
We keep each shade batch together. Heavy pavers, large panels and mosaic sheets are packed differently.
Building a Project Tile Order
Assign tiles to rooms
Tell us which tile goes on which surface; we keep floors, walls, outdoor and pool areas separate.
We set out the layout
We place joints, centerlines, cuts and pattern direction on your plans, with trims and transitions.
Confirm product and documents
We match face, body and setting system to each location and confirm which slip and absorption reports are available.
Batch-matched and labeled
Each series ships in batch-matched shade and size, with field, trims and spares labeled by room.
Tile Purchasing Questions
Which tiles can go on floors?
Our floor tiles; for wet or commercial floors we confirm which have slip test reports. Wall tiles are made for walls.
How do I work out finished floor height?
Add tile, adhesive and any membrane. We include the full build-up when you check door clearances.
Why is mosaic sheet size different from its coverage?
Interlocking edges make sheets overlap. We calculate coverage from the installed repeat.
How much extra tile should I order?
It depends on the layout. We calculate it from your cut plan plus the spare stock you want.
Which tile should I use in wet areas?
One with the slip rating the location needs. Tell us the location and rating, and we confirm which tiles have a matching report.
Should trims match the field tile?
Yes. We supply trims, corners and edges from the same series and batch, listed apart from the field area.