Ceramic and porcelain baseboards
This baseboard is a flat tile face along the bottom of the wall, marking the room perimeter above the floor and continuing through corners and doorway returns. The base tile, the wall behind it and the floor junction are each detailed in the room drawing.
Ceramic and porcelain are offered as separate material choices for the flat base. A dark ceramic appearance can continue the tone of a dark floor, while a white porcelain appearance creates a lighter perimeter against a gray floor. Material, color and face finish belong together in the tile schedule.
The top edge stays exposed above the tile base, so a smooth top transition, a cut end beside a door casing and an outside corner each need a deliberate edge detail. Corner treatment and finished ends are listed apart from the straight tile lengths.
The dark ceramic base creates a continuous band at the floor edge. It can coordinate closely with a dark tiled floor while remaining visibly separate from the painted wall. At a doorway or outside corner, the exposed end and any cut edge become part of that color arrangement.
The white porcelain base gives the wall perimeter a lighter line. The selected appearance has a flat face and a softly rounded upper edge. Its contrast against a gray floor makes changes in base height, joints and corner alignment more noticeable.
A 4-inch nominal base gives a lower band than a 6-inch nominal base: the taller format takes more of the wall, the lower one leaves more wall finish showing. Line the chosen height up with door casings, cabinet ends and changes in floor level.
| Product type | Flat tile baseboard / skirting tile |
|---|---|
| Selected material | Ceramic tile baseboard with a flat face; dark appearance shown |
| Offered materials | Ceramic and porcelain |
| Offered nominal formats | 4 x 24 in; 6 x 24 in; 4 x 36 in |
| Project sizing | Custom sizing available; finished height, length, thickness and edge treatment specified with the selected pieces |
| Profile | Flat face; selected white porcelain appearance has a softly rounded upper edge |
| Installation interfaces | Wall substrate, exposed top edge, corner cuts, door stops and wall-floor junction detailed on the drawing |
| Minimum order | Supplied in full packing units from one production batch, rounded up from your area. Small lots can ship with the rest of your project list in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The offered nominal formats are 4 x 24, 6 x 24 and 4 x 36 inches, with project-specific sizing also available. The 4 x 24 and 6 x 24 formats compare base height at the same nominal length; 4 x 24 and 4 x 36 compare length at the same nominal height. Actual finished dimensions and the required edge treatment are identified with the selected pieces.
A 36-inch nominal length produces fewer repeated vertical joints than a 24-inch length over the same straight run. Doorways, short returns and corner cuts change the useful length of each piece. Lay out complete runs together so small end cuts do not accumulate at prominent positions.
Inside corners and outside corners need different cuts and edge decisions, and door casings, cabinet plinths and changes in floor finish create their own stopping points. The baseboard schedule marks those locations, and setting materials and the wall-floor junction follow the installation detail.
Ceramic or porcelain, selected face appearance and nominal height/length identify the baseboard selection. A straight dark ceramic run and a white porcelain run with a taller base are separate material and cutting packages.
Quantities follow the wall perimeter, doorway deductions, returns and cutting layout, and longer pieces change joint frequency and how short cuts fit the run. Corner pieces, finished ends and spare tiles are itemized individually.
Exposed top edges, end returns and outside-corner cuts add different finishing work, so the order marks factory-finished edges, site cuts and which edges stay exposed after installation.
Packing protects tile faces and finished edges, and shipment quantity and destination set the freight. Wall preparation, setting materials, joint treatment, site cutting and installation labor are added only when included in the order. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The offered configuration here is flat wall-base tile. Its face meets the floor at a separate junction; the selected white porcelain appearance has a softly rounded top edge. A curved floor-to-wall cove is a different profile.
The ceramic and porcelain offer includes 4 x 24, 6 x 24 and 4 x 36 inch nominal formats, with custom sizing also available. Actual finished dimensions and edge treatments are specified for the selected pieces.
At the same nominal length, the 6-inch format makes a taller band on the wall and the 4-inch format a lower one. Coordinate that height with door casings, cabinets, floor-level changes and the wall finish.
No. A longer nominal piece reduces repeated vertical joints along a straight run compared with a 24-inch piece. Doorways, short returns and corners still require a cutting layout, so a longer format does not remove every cut or joint.
Yes. We list inside corners, outside corners and end pieces as separate lines next to the straight baseboard quantity, so every corner is finished cleanly.
The base tile is the perimeter finish. The wall substrate, setting materials, floor-wall junction and any waterproofing are parts of the project construction detail, quoted on their own.
Fluted Glazed Ceramic Wall Tiles with Three Rounded Ribs
300 × 100 mm Matte Ceramic Wall Tiles
Hand-Painted Ceramic Wall Tile Rosette Sets
Warm Beige Ceramic Bullnose Wall Tile Trim