Concealed Door and Flush Wood Wall-Panel System
- Millwork assembly
- Veneered fixed wall panels, transom and one flush door leaf
- Veneer finish
- Natural oak veneer · vertical grain
- Door leaf
- 900 W × 2100 H × 45 T mm
Custom Millwork for Your Project
5 products
Custom Reception Counter with a Lowered Service Section
- Service surfaces
- High + lowered
- Reception counter
- Oak-veneer visitor face and end panels with warm-white HPL finished worktops
- Selected run
- 2400 mm
Floor-to-Ceiling Solid-Oak Fin Dividers
- Timber and finish
- Solid oak with clear matte finish
- Assembly width and fin count
- 1200 W × 120 D × 2400 H mm · fifteen fins with 40 mm gaps
- Fin section and length
- 40 mm face × 100 mm depth; 2320 mm length
Wall Bed Millwork with Side Storage
- Selected bed type
- Vertical fold-down wall bed with two side storage towers
- Configuration
- Off-white faces with oak-tone wood surfaces
- Selected width breakdown
- 400 mm tower + 1640 mm center + 400 mm tower
Window Seat Bench with Three Closed Storage Bays
- Project layout
- 2,400 mm Three-Bay Bench
- Project configuration
- Selected 2,400 W × 600 D × 450 H mm window-seat cabinet; three closed storage bays, 18 mm plywood casework, 6 mm supported back and a 36 mm seat built from two 18 mm plywood layers with an oak-veneer surface.
- Case construction
- 18 mm plywood
No products match your search.
Counters, Window Seats, Wall Beds & Architectural Millwork
Reception & Service Counters
Our reception counter combines a raised visitor ledge with a lower service section. Knee space, equipment and staff storage are planned so nothing sits where people need to sit.
Window Seats with Storage
A 2,400 mm three-bay window seat opens from the front, so you can reach storage without lifting the cushion. The cabinet sides and partitions carry the seat.
Wall-Bed Cabinetry
A vertical fold-down wall bed sits between two storage towers. We match the frame and lift mechanism to the mattress you choose and detail the wall fixings.
Flush Panel Doors & Room Dividers
A concealed door aligns a flush leaf with fixed veneered wall panels and a transom. Floor-to-ceiling solid-oak fins, clear matte finished, divide a room without closing it off.
Custom Millwork: Materials & Components
Plywood, Veneer & HPL Surfaces
Millwork is built on plywood, faced in veneer or HPL, with every exposed edge specified.
Solid-Wood Elements
The divider fins are solid oak throughout. We set fin section, spacing and fixing points with you.
Specialized Mechanisms & Connections
Wall-bed lifts, concealed-door hinges and counter connectors are each specified for their assembly, with mounting positions and clearances on our drawings.
Custom Millwork: Sizes & Selection
| Detail | What we need from you | Why it matters |
|---|---|---|
| Room survey | Room plans and finished wall, floor and ceiling levels | Sets fitted edges and installation sections. |
| Moving envelope | Furniture around wall beds and doors | Keeps circulation clear when the bed is down or the door is open. |
| Clear service space | Staff and visitor positions at counters | Places supports and equipment outside the seated opening. |
| Support arrangement | Wall and floor construction | Sets the load path and site preparation. |
| Finish continuity | Veneer species and grain direction | Keeps the grain continuous across fixed and moving faces. |
| Mechanism compatibility | Mattress size and door hardware preferences | Lets us match lifts and hinges to the full assembly. |
Custom Millwork: Supply & Coordination
Millwork Fabrication
- Component and module list
- Structural panels, partitions and finished faces
- Moving fronts, access doors and scheduled storage
Mechanisms & Exposed Details
- Wall-bed lift or concealed hinge set
- Veneer direction, joints and exposed edges
- Countertops, fins or seat surfaces
Room & Installation Interfaces
- Wall, floor and ceiling connection locations
- Open-position and service clearances
- Delivery sections, joining and site fitting
Custom Millwork Quote Factors
Geometry & Fitted Edges
Stepped profiles, panel grids, corners and full-height pieces need more fabrication. We price from your measured room.
Surface & Grain Matching
Matched veneer, solid timber and HPL edges each have a different cost, and exposed backs and ends add finished area.
Mechanism Package
Wall-bed lifts and concealed-door hardware come as matched sets, which we include in the quote.
Transport & Site Work
Large panels, long fins and assembled counters ship in delivery sections. Site joining and final scribing are planned with your installer.
Ordering Custom Millwork
Tell us what it must do
Send the room plan and what the piece is for: a service counter, a seat, a bed or a divider.
We draw the shop drawings
Our drafters turn your elevations into shop drawings with moving openings, storage, supports and the finish grid.
Check mechanisms and fixings
We confirm hardware, wall and floor fixings, open-position clearances and installation access with you.
Built in Foshan
After approval, every piece is built to those drawings in our Foshan factories and shipped in labeled sections.
Custom Millwork: buying guides
- Plywood vs Particleboard Cabinets: Is the Upgrade Worth It?Judge a plywood cabinet upgrade against a specified particleboard package, using a like-for-like cost comparison and a filled…
- Custom Cabinet Costs: Which Design Decisions Change the Quote?See how two equal-size wardrobes produce different cabinet costs. Compare drawer assemblies, shelf quantities, finish options and closure…
Custom Millwork FAQs
How is custom millwork different from standard cabinets?
Each piece is designed for one room and one job, such as a counter at two heights, a seat, a fold-down bed or a flush door. We draw it from your elevations and build it to those drawings.
Can a reception counter have a lower section?
Yes. Our counter has a raised ledge and a lower service section with clear knee space for staff or wheelchair users.
How is a storage window seat supported?
The cabinet sides and partitions carry the seat to the floor. We set support spacing for the seat length and cushion you choose.
What do you need for a wall bed?
The mattress size, the room plan and the wall construction. We match the frame and lift to the mattress and check the bed's open position against your furniture.
How does a concealed door line up with the wall panels?
We draw the leaf, frame, hinges and panels as one elevation, so veneer grain and panel joints run straight across the door.
What should a millwork inquiry include?
Room dimensions, what the piece is for, finish references and any hardware or equipment. Tell us about site access and who will install.