Matte wall tile layout
1307Y is a ceramic interior wall tile in a 300 × 100 mm rectangle, whose long and short edges can run horizontally or vertically to set the wall's rhythm and cut pieces. The tile size and edge are coordinated with the grout joint to give the installed module.
The listed tile thickness is 6.5 mm. The complete wall finish also includes the selected setting material and any backing or waterproofing system required for the location. This build-up affects junctions with door casings, outlets, shelves and adjoining finishes.
The selected 1307Y surface is matte. The tile is specified as an interior wall finish, with its face appearance and shade identified for the order. Its listed water absorption is a body-property figure, separate from the water-management design behind the tile. Wall location, setting system and exposure conditions therefore remain part of the installation selection.
The matte face is selected with the actual tile appearance, room lighting and adjacent finishes. A group of full tiles gives the wall selection a more useful reference than a single small color sample. The approved face and shade references belong with the model and quantity, while the rectangular format remains a separate part of the specification.
The order identifies the tile’s shade and dimensional batch, often called caliber, together with model 1307Y. These references stay with the cartons used for the wall. A later production batch can differ even under the same model name. Retained spare tiles are planned with the original purchase and kept with their carton references for future repairs.
Horizontal and vertical layouts emphasize the rectangle in different ways, while grout color can either soften or accentuate the grid. Actual tile dimensions, edges and the wall plane affect the joint width. At an exposed end, corner or transition, the selected trim or termination detail completes the wall finish. No fixed narrow-joint or matching corner-piece allowance follows from the format alone.
| Model & material | 1307Y ceramic interior wall tile with a matte surface. |
|---|---|
| Selected wall tile configuration | 1307Y matte ceramic interior wall tile; listed 300 × 100 mm format and 6.5 mm tile thickness. Face appearance, shade and dimensional batch identified for the order. |
| Listed size & thickness | 300 × 100 mm format; 6.5 mm tile thickness. Actual supplied dimensions, tile edges and dimensional batch are coordinated with the selected grout joint. |
| Listed water absorption | 10–15% as listed for the tile. This body-property figure is separate from the waterproofing and suitability of the complete wall assembly. |
| Pieces per carton | 40 pieces per carton. |
| Listed carton coverage | 1.2 m² per carton. Cuts, installation allowance and retained spare tiles are separate from net wall area. |
| Listed carton weight | 17 kg per carton as listed; pallet, protective packing and total shipment weight on the packing list. |
| Minimum order | Supplied in full packing units from one production batch, rounded up from your area. Small lots can ship with the rest of your project list in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The tile grid relates to the wall elevation, countertop, doors, shelves and outlets, and starting lines and orientation set the cuts at the top, bottom and ends of each area. Cuts around fittings are drawn on the same layout as the joints, and each area is measured on its own where orientation, finish or conditions change.
Inside and outside corners, niches and open wall ends need defined finishing details. Cut tile edges, metal or other compatible trims and any corner pieces differ in look and quantity, and their positions affect the field-tile cuts and finished wall dimensions, so the quotation itemizes each one for the 1307Y tiles.
In a wet location, backing, waterproofing, penetrations and changes of plane are coordinated with the intended exposure. The setting material also needs to suit the tile and substrate.
The listed carton contains 40 tiles covering 1.2 m². The order starts with measured wall areas and the selected layout, then includes agreed allowances for cuts, breakage and retained spares. Quantities round to full cartons. Separate wall elevations or room types keep the purchased area traceable without treating every square meter as a net installed area.
Exposed-edge trims, corner treatments, niche returns and cuts around fittings are separate quantity items where required. Their dimensions and positions follow the wall layout. Retained spare tiles are included as a defined project quantity, with the original shade and dimensional batch references.
The tile subtotal is separate from wall preparation and the installation system. Setting material, grout, flexible joints and any required backing or waterproofing are selected for the location. Existing walls may need removal or repair work before tiling. Those tasks and installation labor are priced against the actual wall condition and exposure requirements.
Each 40-piece, 1.2 m² carton weighs 17 kg. Pallet material and protective packing add separate shipment weight. Carton counts, pallet arrangement, delivery access and unloading are identified for the destination. Keeping room and batch references with the cartons also helps distribute the wall tiles to the intended installation areas. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
It is listed as a 300 × 100 mm ceramic interior wall tile with a matte surface and 6.5 mm tile thickness. The actual supplied dimensions and edge condition are coordinated with the grout joint. Setting material, backing and any required waterproofing are separate parts of the wall build-up.
The listed pack contains 40 pieces covering 1.2 m², with a listed carton weight of 17 kg. The purchase quantity includes the selected layout’s cuts and any agreed breakage and spare allowance, then rounds to full cartons. Purchased coverage and net wall area are separate figures.
This tile is for interior walls; floors, exterior walls and frost exposure call for a product and installation system rated for them.
No. The tile face and grout are part of the finish, while water management depends on the complete wall assembly. Backing, waterproofing, penetrations, corners and flexible joints are selected for the wet location. The tile’s listed 10–15% water absorption is not a waterproofing or complete-system rating.
Joint width is chosen with the actual dimensions, edge condition and wall plane, and exposed ends and corners get a defined finishing detail, with trims or corner pieces listed on the quote.
Each room selection identifies 1307Y with its shade, dimensional batch and carton quantity. A defined spare quantity can be included in the original order and kept with the carton references.
Fluted Glazed Ceramic Wall Tiles with Three Rounded Ribs
Ceramic & Porcelain Tile Baseboards
Hand-Painted Ceramic Wall Tile Rosette Sets
Warm Beige Ceramic Bullnose Wall Tile Trim