Upholstered Bed with Grid Straps & a Padded Foot Rail
A tall padded headboard rises behind the mattress. Brown horizontal and vertical bands divide its face into a grid, with square junction details at the crossings. The continuous upholstered headboard forms part of the bed frame.
The low foot rail has a broadly rounded upholstered face. Two brown bands cross its front, echoing the headboard pattern. These bands are decorative trim, separate from the inner frame and mattress support.
Russian larch forms the inner frame, with high-density, high-resilience foam padding and gold-tone corner brackets. A steel-and-wood slat base is an optional configuration. Its support arrangement is specified with the selected mattress and ordered bed structure.
The selected appearance uses light-colored, lightweight upholstery over the padded headboard and rails. The order records its material composition, color reference and cleaning instructions alongside the foam and trim selections.
Brown bands define the headboard grid and the two foot-rail accents. Their material, width and surface reference are specified with the upholstery package, keeping the contrast trim consistent across the headboard and rails.
Square junctions sit at the headboard crossings, while seams follow the padded outer edges. The trim, hardware tone and seam layout are recorded together. Matching bedside pieces and decorative bedding are separate selections.
| Configuration | Upholstered bed with a grid-strap headboard and padded foot rail |
|---|---|
| Appearance package | Lightweight light-colored upholstery, brown decorative grid straps, foam padding and Russian larch inner frame; actual cover and trim references specified together. |
| Inner frame & padding | Russian larch inner frame; high-density, high-resilience foam; gold-tone corner brackets |
| Selected overall size | 2080 W × 2280 D × 1230 H mm; chosen project design basis |
| Selected mattress basis | Nominal 1800 × 2000 mm; final pocket, fit allowance and support follow the selected mattress |
| Base & trim | Steel-and-wood slat base optional; brown decorative straps and junction details each specified |
| Order boundary | Mattress, bedding, bedside furniture, lift storage and powered mechanisms not included in the bed-frame item |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The project design uses 2080 mm overall width, 2280 mm depth and 1230 mm headboard height. These are chosen dimensions. The drawing relates the outer body to a nominal 1800 × 2000 mm mattress basis; the actual mattress pocket includes its specified fit allowance.
Mattress thickness, weight and support requirements determine the selected slat assembly and final sleeping height. The nominal mattress size is separate from the outside frame size; its actual dimensions and support instructions set the pocket allowance and base arrangement.
Allow access beside both rails and beyond the padded foot end. Bedside-table height and position follow the actual mattress/top level and headboard profile. Doorways, elevator turns and final assembly depend on the actual packed headboard and rail components.
The bed-frame item identifies the upholstered headboard, padded rails, larch structure and specified corner hardware. Carry the selected overall dimensions with those parts. The mattress, bedding, pillows and bedside furniture are separate.
The cover reference, foam specification, brown strap material and junction details define the appearance package. Our quotation records those selections together, including any specified cover removal or special cleaning requirements.
The selected support base is itemized with its mattress interface and assembly. Steel-and-wood slats are an optional base selection for this upholstered frame. This configuration has fixed padded rails and does not include a lift-up storage mechanism.
The headboard and rail packing format determines receiving access and site work. Protective packing, freight, unloading and final assembly are itemized against the actual supplied components, with packed dimensions recorded for the receiving route.
The brown straps form the decorative headboard grid and foot-rail accents. The inner bed structure and selected mattress base provide the support, with the base specified for the actual mattress.
The inner frame uses Russian larch with high-density, high-resilience foam padding and gold-tone corner brackets. The upholstery cover and decorative brown straps have their own material references in the appearance package.
The selected project basis is a nominal 1800 × 2000 mm mattress within a 2080 × 2280 mm outside bed envelope. The final pocket includes the fit allowance and support required by the actual mattress.
A steel-and-wood slat base is an optional configuration. Our quotation identifies the selected support assembly and its mattress interface. The mattress itself is a separate item.
No. Lift-up storage is not part of this configuration. The selected body has padded rails and a decorative grid headboard. Any storage mechanism would require a different structure and its own hardware specification.
Provide quantity, room plan, selected overall size, mattress specification, cover and strap references. Include the receiving route and assembly requirements. The quote separates the bed frame, selected support base, mattress, bedding and delivery work.
Rabbit-Ear Upholstered Bed with a Paw-Shaped Footboard
Textured Fabric Bed with a Curved Headboard
Upholstered Beds with Tall Padded Headboards
Beige Fabric Storage Bed with a Horizontal-Channel Headboard