Upholstered Bed with Saddle-Leather Trim & Exposed Metal Rails
The back is divided into two broad rectangular upholstered cushions. Each has a soft outer edge and a perimeter seam. Their split line stays distinct above the mattress, keeping two panels across the full width.
The stainless steel rail stays exposed along the side and foot of the bed, with short legs below the corners. Saddle-leather trim wraps the exposed rail. The supplied assembly identifies the rail sections, finish and connections alongside the inner bed structure.
Brown saddle-leather loops repeat along the exposed rail, alternating with bare metal sections. They form the decorative rail trim. The Russian larch inner frame and selected mattress base provide the supporting structure beneath the upholstered parts.
A cotton-linen blend is one cover selection for the upholstered back. Its textile reference sets the color, texture, composition and care instructions. The light fabric coordinates with the brown rail trim; other room furniture is ordered on its own.
Nappa leather is another cover selection for this split-back bed. Our order confirmation identifies its leather reference, color and surface finish, together with the padding and seam layout. The split cushions and exposed metal rails remain part of the same configuration.
The saddle-leather trim and stainless steel rails have separate material references from the back upholstery. Metal finish, trim tone, loop pattern and seams are recorded together so the back cushions and rail details form one coordinated package.
| Configuration | Split-back upholstered bed with exposed metal rails and repeated saddle-leather trim |
|---|---|
| Back upholstery | Cotton-linen upholstered back cushions, resilient foam, Russian larch inner frame and stainless steel bed rails with saddle-leather trim; actual textile and trim references specified. |
| Frame materials | Russian larch inner frame; stainless steel bed frame with saddle-leather trim; actual metal grade and sections specified for the order |
| Selected overall size | 1960 W × 2270 D × 1030 H mm; chosen project design basis |
| Selected mattress basis | Nominal 1800 × 2000 mm; final pocket, fit allowance, support and sleeping height coordinated with the mattress |
| Padding & hardware | High-density, high-resilience foam; custom black corner brackets; rail connections scheduled with the assembly |
| Supply boundary | Bed frame and chosen back upholstery; mattress, bedding, bedside furniture and room services each itemized |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The project design uses 1960 mm overall width, 2270 mm depth and 1030 mm back height. These are chosen dimensions. A nominal 1800 × 2000 mm mattress envelope sits inside the outside rail layout; the final support and pocket allow for the actual mattress and fit allowance.
The selected support assembly and mattress thickness determine the finished sleeping level. Keep that level separate from the overall back height and outside rail size. The fabrication package identifies the actual base, center support and connections without treating the decorative loops as structural straps.
The exposed rails and short legs leave an open appearance beside the bed. Coordinate bedside tables, walking routes and the actual floor contact with the room plan. Headboard and rail packing dimensions determine whether the components can pass through the receiving route and be assembled in the bedroom.
The bed item identifies the split back cushions, inner frame, exposed rails, short legs and saddle-leather trim. The selected overall dimensions travel with that assembly. Mattress, bedding, side tables and room lighting are separate products.
The cotton-linen or Nappa leather cover, foam specification and saddle-leather trim define the upholstery package. The order records the actual textile composition or leather reference, surface finish, color and care instructions for the selected materials.
The stainless steel rail sections, connections and selected mattress-support assembly are specified together. Their assembly details establish the base arrangement, center support and connections to the inner frame. Decorative rail loops remain a separate trim item.
Our quotation lists protective packing, transport, unloading and bedroom assembly next to the furniture materials. Actual component sizes and weights govern handling. Record floor protection and final placement with the receiving plan.
The saddle-leather loops are decorative rail trim. The inner bed frame and selected mattress base provide support, with the actual base arrangement specified for the mattress.
Yes. A cotton-linen blend and Nappa leather are cover selections for the same split-back bed configuration. The material reference, color, padding and seams are specified with the order.
The selected project basis is a nominal 1800 × 2000 mm mattress within a 1960 × 2270 mm outside bed envelope. The final pocket, fit allowance and support arrangement follow the actual mattress and fabrication drawing.
Yes. The exposed bed rails use stainless steel with saddle-leather trim. The supplied assembly identifies the metal grade, rail section, finish and connections as part of the frame specification.
No. The bed-frame item is separate from the mattress, bedding, bedside tables and lighting. The quotation also identifies the selected mattress-support assembly and any local assembly work.
Provide quantity, room plan, selected overall size, mattress specification, back upholstery and trim references. Include receiving access and assembly requirements. These details separate the bed materials from packing, transport and site work.
Upholstered Bed with a Low Tufted Headboard
Beige Fabric Storage Bed with a Horizontal-Channel Headboard
Rabbit-Ear Upholstered Bed with a Paw-Shaped Footboard
Upholstered Bed with Grid Straps & a Padded Foot Rail