Wood Dining Armchair with a Cutout Back & Leather Seat

01 / 03

Tapered wood arms extend from a sculpted cutout back above a cream leather seat. Review the 600 mm overall width, solid ash legs, exposed wood finish and table-apron fit for this dining armchair.

Configuration: Wood dining armchair with an open cutout back, tapered arms and leather seat
Leather & wood finish: Cream leather seat, dark-finished shaped wood arms and back, and solid ash legs; leather and wood finish references specified together.
Overall width: 600 mm (60 cm)

Leather & wood finish Cream Leather & Dark Wood

Cream Leather & Dark Wood

Request a Quote View Product Specifications

Cutout Wood Back, Tapered Arms & Leather Seat

Sculpted Open Wood Back

The upper back forms a broad curved outline with an open cutout beneath it. Bare wood frames the opening, with no padded back cushion. Shaped rear supports connect the upper profile toward the seat and legs.

Long Tapered Dining Arms

The wood arms project forward as narrow tapering extensions. Their length is part of the chair body, with no upholstered pad. The actual arm level and table-apron clearance determine how far the chair can move below a dining table.

Cream Leather Seat & Four Wood Legs

A padded cream leather seat sits inside the wood frame above four solid ash legs. The shaped back and arms have their own component specifications, coordinated with the seat and leg connections as one complete dining chair.

Wood dining armchair with a curved open-cutout back, long tapered arms, a cream leather seat and four wood legs

Cream Leather, Dark Wood Finish & Ash Legs

Cream leather seat, dark wood finish and solid ash legs, each with its own material reference

Cream Leather Seating Surface

Leather covers the padded seat. Its material reference records the grade, cream color, surface finish and care instructions alongside the seat padding, keeping the cover specification consistent across a set of chairs.

Dark Wood Finish

The back, arms and legs share a warm dark wood appearance. The accepted finish reference is coordinated with the cream leather seat, while each shaped wood component retains its own material and construction specification.

Ash Legs & Shaped Components

The four legs are solid ash. The shaped upper back, tapered arms and their joints are specified as individual components. Their finish is coordinated with the legs to create one continuous wood appearance.

Cutout-Back Dining Armchair Dimensions & Materials

Configuration	Wood dining armchair with an open cutout back, tapered arms and leather seat
Appearance package	Cream leather seat, dark-finished shaped wood arms and back, and solid ash legs; leather and wood finish references specified together.
Wood components	Solid ash legs; shaped back/arm species, construction and joints each specified
Overall width	600 mm (60 cm)
Overall depth & height	590 D × 790 H mm (59 D × 79 H cm)
Seat upholstery	Leather; actual grade, color, finish and padding specified with the order
Table interface	Actual seat/arm heights, table-apron clearance, leg positions and occupied pull-back area coordinated together
Minimum order	Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container.
Standards & certificates	Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order.

Front and plan chair envelopes using overall dimensions of 600 mm width, 590 mm depth and 790 mm height; table fit uses separate seat and arm levels

600 mm Armchair Width & Table-Apron Fit

600 × 590 × 790 mm Overall Envelope

The overall size is 60 × 59 × 79 cm, equivalent to 600 mm wide, 590 mm deep and 790 mm high. The drawing shows proportional front and plan envelopes. Seat height and arm height are separate order dimensions for coordinating the actual table interface.

Tapered Arms below the Table Apron

Compare the full arm profile with the lowest apron or rail under the tabletop. The final chair/table drawings identify the available clearance and how far the seat can tuck in.

Leg Positions & Room Circulation

The complete 600 mm width sets the outside chair envelope for a dining layout. Table legs, neighboring arms and the occupied pull-back area need to be coordinated together. The open cutout does not reduce the floor space occupied by the legs and seat.

Cutout-Back Wood Armchair Cost & Supply

Complete Wood Armchair

The complete chair item identifies the shaped back, projecting arms, padded leather seat, four solid ash legs and their assembly. The 600 × 590 × 790 mm overall dimensions travel with that configuration. Dining tables and other furniture are separate products.

Leather & Exposed Wood Finish

The leather reference, padding, wood finish and exposed surfaces define the appearance package. The order also records the upper components and their species, construction and joints, alongside any required material documentation.

Quantities & Table Allocation

List chair quantities by dining table or room with one leather and wood finish reference. Repeated areas can share that selection while retaining their own packing marks. Spare chairs or replacement upholstery are agreed as their own items.

Packing, Delivery & Assembly

The agreed assembly and packing format determines receiving dimensions. Protective packing, freight, local assembly and floor-contact protection are itemized with the quantities and delivery route.

Cutout-Back Dining Armchair Supply Items

Chair assembly: Shaped wood back, tapered arms, leather seat, four ash legs and specified connections.
Material references: Actual cream leather, padding, wood finish and upper-component construction/species.
Overall size & fit: 600 W × 590 D × 790 H mm listed envelope; seat and arm heights coordinated with the dining table.
Delivery: Chair quantities, room marks, protective packing and agreed receiving/assembly; tables and other furniture separate.

Cutout-Back Dining Armchair FAQs

Which components use solid ash?

The four legs are solid ash. The shaped back, tapered arms and their joints have their own material and construction specifications, with a coordinated dark finish across the wood components.

Is there a padded back cushion?

No. The selected body has a bare shaped wood back with an open cutout and a separate padded leather seat. An upholstered back would change the construction and materials.

What are the overall dimensions?

The listed size is 60 cm wide, 59 cm deep and 79 cm high, or 600 × 590 × 790 mm. Seat and arm heights are separate dimensions that are coordinated with the actual dining table.

Will the arms fit under a dining table?

That depends on the final arm profile and the lowest table apron or rail. Coordinate both drawings before setting the seating layout.

What leather grade is included?

The seat uses leather upholstery. Its selected material reference records the leather grade, cream color, surface finish and care instructions with the order. The padding is specified alongside the cover.

What should a dining-chair quote identify?

Provide quantity, table plan, leather reference, wood finish and any seat/arm-height requirement. Add material performance requirements and the receiving route. The quote lists the chair assembly, packing, transport and local work as distinct lines.