Shaggy Wool Accent Chair with Slender Metal Legs
Long, loose wool fibers give both upholstered surfaces their soft outline. The seat and curved back remain separate, leaving open sides and a gap between the two pads. This is a compact armless chair, more open than an enclosed tub seat.
Sponge fills the thick seat pad and the separate upholstered back. The ordered pad build identifies its density, internal layers and cover attachment. The long wool pile softens the edge and needs space around the seat and back when the chair sits in a recess.
Four slim stainless-steel legs leave the floor open beneath the open-sided seat. Their dark finish contrasts with the blue wool. Leg finish and floor-contact details are coordinated with the upholstery reference as one chair configuration.
The selected appearance is a soft blue shaggy wool cover. Pile direction and changing light affect how the color reads across the rounded seat and back. The upholstery reference should identify the accepted shade, fiber composition and pile appearance together.
The slender legs contrast with the blue upholstery. Use one coordinated finish across the supplied chair set; the accepted finish reference defines its color and sheen. Stainless-steel grade, coating process and corrosion classification are separate specifications.
The blue wool cover, sponge-filled seat and back, and four slender legs form one complete armless chair. The upholstery and metal finish references are recorded together so chairs ordered for several rooms share a coordinated appearance.
| Chair type | Armless accent chair with separate upholstered seat and curved back; four slender legs. |
|---|---|
| Selected configuration | Blue wool upholstery over sponge filling, with a separate curved back and stainless-steel legs. Listed overall size: 22.05 W × 22.05 D × 25.2 H in, approximately 560 × 560 × 640 mm. |
| Overall dimensions | 22.05 W × 22.05 D × 25.2 H in; approximately 560 W × 560 D × 640 H mm. |
| Upholstery | Wool; selected blue shaggy appearance. Final shade, fiber specification and pile reference by the accepted upholstery selection. |
| Filling | Sponge. Density, pad construction and cover attachment are defined in the order schedule. |
| Leg material | Stainless steel. Final finish and floor-contact details are specified for the order. |
| Dimensions | Overall envelope shown; seat height, clear sitting width and floor protection scheduled with the selected chair. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The listed width and depth are each 22.05 in, approximately 560 mm. Overall height is 25.2 in, approximately 640 mm. These are overall dimensions; seat width and seat height are measured on their own. The drawing keeps the front and plan envelopes at a common scale.
The open-sided body can sit beside a sofa, small table or dressing area. Leave useful approach space at the front and keep projecting table corners away from the wool-covered seat and back. A clear passage should continue outside the chair footprint.
The final foot or glide is selected for the finished floor. Long wool pile needs clearance from damp surfaces, abrasive edges and heating outlets. The accepted upholstery care instructions identify the cleaning method for the selected cover.
Our quotation identifies the wool upholstery reference, color, pile appearance and chair quantity. A different upholstery composition or surface changes the material basis; it is not priced by color name alone.
The stainless-steel leg finish and selected floor-contact detail form part of the chair schedule. Any required protective glides should be identified for the actual floor, with their inclusion stated in the quotation.
Chair count, room allocation and a consistent upholstery reference affect how the order is organized. The quote separates this accent chair from sofas, occasional tables and other furniture ordered for the same rooms.
Protective packing covers the wool surface and slender legs for the agreed delivery route. Our quotation identifies the packed quantity, shipment terms and any requested destination handling, alongside the chair materials and quantities.
The chair combines wool upholstery, sponge filling and stainless-steel legs. The upholstery reference identifies the blue shade and pile appearance; the order schedule records the pad build, leg finish and floor-contact details.
The overall size is 22.05 in wide, 22.05 in deep and 25.2 in high, approximately 560 × 560 × 640 mm. These outside dimensions describe the complete chair. Seat height and clear sitting width are separate order dimensions.
No. This armless chair stands on four fixed slender legs. It has a separate upholstered seat and curved back, and the chair item does not include a footrest.
An alternative can be considered as its own upholstery direction. The quotation needs its composition, color and surface reference; the current blue wool chair remains the basis until a different configuration is accepted.
The foot or glide is selected for the actual wood, tile or resilient floor. Our quotation identifies the chosen protection and its inclusion, together with the leg finish and chair quantity.
Send us the chair quantity, room allocation, upholstery reference, destination and requested delivery terms. Include a furniture layout when clearances are tight, and list sofas or tables as their own items in the same inquiry.
Veneer-Shell Fabric Lounge Chair with Metal Legs
Chevron-Quilted Upholstered Bench with Blade Legs
Wood Lounge Chair with a Curved Shell and Leather Seat Pad
Black Leather Swivel Lounge Chairs