Brown Leather Seat & Arm Wraps
The leather reference covers two areas: the seat and the wraps at the arm ends. Keeping those parts under the same reference controls their color, surface texture and edge treatment across the chair.
Leather Dining Armchair with Wrapped Arms & a Wood Back
Leather Dining Armchair with Wrapped Arms & a Wood Back
- Chair configuration
- Four-leg dining armchair with leather-wrapped arm ends and an exposed curved wood upper back
- Leather & Wood Package
- Brown leather seat and wrapped arm ends, dark curved wood back and smoked-finish ash legs; 560 × 560 × 780 mm overall layout.
- Overall layout size
- 560 × 560 × 780 mm; 56 × 56 × 78 cm
Leather-Wrapped Arms, Curved Wood Back & Ash Legs
Leather-Wrapped Arm Ends
Brown leather covers the short arm ends and the separate padded seat. The wraps soften the front of each arm without enclosing the entire side of the chair. Open space remains between the arm structure, back and seat.
Bare Curved Wood Back
A dark curved wood panel forms the upper back. Its exposed face contrasts with the leather seat, while the gap below it leaves the lower back open. This is a wood-back chair, distinct from a fully upholstered barrel-back body.
Four Smoked-Finish Ash Legs
Four tapered ash legs support the chair. Their smoked finish coordinates with the dark upper wood components. The ash leg specification and curved back panel have their own lines on the component schedule, including their finish treatments.
Brown Leather & Dark Wood Chair Components
Smoked Ash Leg Finish
The exposed legs carry a smoked finish over ash. Wood finish matching covers all four supports, including surfaces seen from behind the table. The leg finish is listed alongside the leather color.
Curved Wood Back Surface
The bare upper back is a prominent surface when chairs stand around a dining table. Its dark finish, panel edges and junctions with the arm structure are part of the furniture package. The back panel has its own material description, independent of the leg species.
Wrapped-Arm Dining Chair Dimensions & Materials
| Chair configuration | Four-leg dining armchair with leather-wrapped arm ends and an exposed curved wood upper back |
|---|---|
| Material package | Brown leather seat and wrapped arm ends, dark curved wood back and smoked-finish ash legs; 560 × 560 × 780 mm overall layout. |
| Leather components | Brown leather seat and short arm-end wraps; exact leather reference kept with the order |
| Overall layout size | 560 × 560 × 780 mm; 56 × 56 × 78 cm |
| Legs | White ash with a smoked finish |
| Upper back | Curved wood forming panel with a dark finish; panel material specified on its own |
| Table interface | Outside width includes arms; actual arm and seat heights coordinated with table underside |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Dining Armchair Footprint & Table Pairing
560 × 560 mm Outside Envelope
The selected room layout uses a 560 mm width and depth, with 780 mm overall height. The width includes the arm structure. The complete chair envelope belongs on the dining plan, alongside the actual table leg positions.
Table-Apron Fit Conditions
The wrapped arms sit beside the seated position and can meet a low table apron before the seat moves underneath it. The table underside, chair arm height and intended tuck-in position establish that interface.
Spacing between Adjacent Chairs
The open sides do not remove the width of the arm ends. Seating positions also need space for a person to move the chair back and leave the table. Room dimensions, table supports and the planned number of places establish those gaps.
Leather Dining Armchair Cost & Supply
Chair Body & Upholstery
Our chair line identifies the wood back, arm structure, leather seat, wrapped arm ends and four ash legs. Tables, rugs and other room furnishings are separate pieces. Quantities and room marks identify each chair in a larger furniture order.
Leather, Edges & Wood Finishes
The material package records one leather reference for the seat and arm ends, together with the leg and back finishes. Leather texture, edge treatment and wood finishing affect that package without changing the basic chair body.
Table Interfaces & Repeated Units
The chair schedule carries room quantities and the selected dining-table interface. Repeated units use the same material references. Any requested change to arm geometry or the outside size belongs on the chair drawing, kept clear of the finish selection.
Packing & Receiving
The curved back, wrapped arm ends and exposed legs each need protection during transport. Packing, freight and local receiving are separate quotation items. The agreed delivery format sets the packed size and handling route.
Wrapped-Arm Dining Chair Supply Items
- Chair assembly
- Curved wood back and arm structure, leather seat and arm wraps, four ash legs.
- Exterior materials
- Brown leather, smoked ash leg finish and dark upper back surface with agreed edge details.
- Room & table fit
- 560 × 560 × 780 mm outside layout, chair quantities, room marks and table-apron interface.
- Delivery
- Protective packing and agreed freight, receiving or placement; dining tables and other furnishings separate.
Leather-Wrapped Dining Armchair FAQs
Which parts of the chair have leather?
The brown leather covers the seat and the short wrapped ends of both arms. The curved upper back stays exposed wood. The chair does not have a fully upholstered back shell.
Are the legs and back made from the same wood?
The leg specification is white ash with a smoked finish. The back is a separate curved wood forming panel. Its own material and surface description stays on the order alongside the ash leg finish.
How much floor space does one chair occupy?
The room layout uses a 560 × 560 mm outside envelope and a 780 mm overall height. That width includes the arms. Add the table layout and movement space around the outside of the chair.
Will the arms fit below a dining table?
The pairing needs the actual arm height and the underside or apron of the chosen table. A 780 mm overall chair height describes the back, so it cannot be used as the arm clearance dimension.
How are several chairs kept in the same appearance package?
One leather reference covers the seat and arm wraps. The leg and upper wood finishes are recorded as two surfaces of their own. Those references accompany the chair quantity and room marks.
What does the chair quotation include?
The chair assembly, leather-covered parts, wood components and finishing form the furniture line. Packing and transportation are itemized for the destination. Tables and any agreed local receiving or placement have their own quote lines.
More Dining Chairs & Bar Stools
Smoked Ash Dining Armchair with Upholstered Seat & Back
Wood Dining Armchair with a Cutout Back & Leather Seat
Leather Dining Chair with a Leopard-Pattern Outer Shell
Fabric Bar Stool with a Slender Steel FrameGuides for specifying dining chairs & bar stools
Request a Wrapped-Arm Dining Chair Quote
Leather Dining Armchair with Wrapped Arms & a Wood BackBrown Leather & Dark Wood