Fabric Dining Armchair with a Continuous Barrel Back
The upholstered back curves around the seated position and continues into low arms. The outside remains a continuous covered surface, with no open cutout below the back. That closed profile distinguishes this chair from an exposed wood-back or open-shell armchair.
A separate upholstered seat sits inside the curved back and arm outline. Its front edge is rounded. The 470 mm seat width and 500 mm seat depth describe that sitting area, within the larger overall chair envelope.
Four dark tapered legs lift the upholstered body clear of the floor. Their smoked tone contrasts with the textured cover. The leg material and its surface finish are separate component selections, while the upholstery and cushioning remain one coordinated body package.
The back, arms and seat use the chair’s selected fabric reference. Its texture, color, seam positions and cleaning instructions stay together on the upholstery schedule. The continuous outer back makes fabric consistency especially noticeable around a dining table.
High-density foam is part of the cushion package. The foam specification and the textile reference are two order details. Firmness and the final upholstery build accompany the seat dimensions, with the outside size unchanged.
The four legs have a dark smoked-ash color. That finish reference belongs beside the fabric selection, allowing the exposed supports to coordinate with the table and other room furniture. The component schedule keeps surface appearance distinct from the underlying leg material.
| Chair configuration | Fully upholstered dining armchair with a continuous barrel back and low arms |
|---|---|
| Material package | Fabric-covered continuous barrel back and low arms, separate seat cushion, high-density foam and four dark tapered legs; 590 W × 630 D × 790 H mm overall. |
| Overall size | 590 W × 630 D × 790 H mm |
| Seat size | 470 W × 500 D × 485 H mm |
| Upholstery | Fabric on back, arms and separate rounded-front seat; actual textile reference retained |
| Cushioning | High-density foam; density and firmness recorded with the upholstery specification |
| Leg supports | Four tapered legs in a dark smoked-ash color; leg material identified on its own |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The complete chair is 590 mm wide, 630 mm deep and 790 mm high. The width includes the upholstered arms and back. Use that overall footprint when placing several chairs around a table or close to a wall.
The seat is 470 mm wide, 500 mm deep and 485 mm high. These dimensions describe the sitting position, while the 790 mm overall height describes the back. The actual table height and underside determine how the chair pairs with that table.
The low arms remain part of the chair’s outside envelope. A table apron, pedestal or leg can restrict the chair before the back reaches the table edge. The layout therefore includes the intended tuck-in position and space to move the chair away from the table.
The furniture line identifies the continuous padded back and arms, separate seat, cushioning and four tapered supports. A dining table, loose accessories and other furniture are separate items. Room quantities and chair marks identify repeated units.
The fabric reference, seam treatment, cushioning specification and exposed leg finish define the material package. Changing the cover affects the upholstery work.
The order carries both overall and seat dimensions, together with the actual table pairing. Repeated chairs use matching material references. Any proposed change to arm shape, leg arrangement or seat geometry belongs on a revised furniture drawing.
Packing protects the continuous back surface, arm edges and exposed legs. Transport and destination receiving are each itemized. The supplied assembly format establishes the packed size and handling route.
No. The outside back is continuously upholstered and flows into the low arms. It is a closed barrel-back body with a separate seat cushion, unlike an exposed wood-back chair.
The chair is 590 mm wide, 630 mm deep and 790 mm high. Those dimensions include the arms and curved back. Use the complete footprint for the dining layout.
The seat is 470 mm wide, 500 mm deep and 485 mm high. They are separate from the outside dimensions. The seat height describes the sitting position and is the relevant reference for pairing the chair with a table.
The upholstery package uses one fabric reference across the seat, arms and back, with high-density foam cushioning. Keep the textile, seam treatment, cleaning instructions and foam specification together for repeated units.
The four tapered supports use a dark smoked-ash color. The finish is scheduled alongside the leg material and is a selection of its own, apart from the upholstered fabric.
Include the chair quantity, room marks, fabric and leg-finish references, overall and seat dimensions, and actual table pairing. The furniture line remains separate from packing, freight and any agreed local receiving or placement.
Brown Upholstered Dining Chair with a Black Metal Frame
Leather Dining Chair with a Leopard-Pattern Outer Shell
Fabric Dining Chair with Two Separate Oval Back Pads
Black Fixed Bar Stool with Square Stainless Steel Base