Gray Woven Interior
The selected inner upholstery is gray fabric. Its fiber composition, weave, shade and cleaning code are recorded with the accepted textile reference so seat and back surfaces can be coordinated across the chair set.
Fabric Lounge Chair with a Microfiber Outer Shell
Fabric Lounge Chair with a Microfiber Outer Shell
- Chair type
- Upholstered lounge armchair with fabric seating surfaces and a contrasting outer-back shell.
- Configuration
- Gray fabric on the inner seating surfaces, saddle microfiber leather on the outer back, sponge filling and a 304 stainless-steel frame. The dark support finish is coordinated with the outer shell.
- Inner upholstery
- Fabric; gray selected appearance. Composition, weave, color and care code by the accepted textile reference.
Fabric Seating and the Microfiber Outer Shell
A Padded Inner Seat and Back
The gray fabric seat and cushioned back sit inside a continuous outer form. Low upholstered arms wrap around the sides, giving the chair an enclosed shape while the back cushion rises above the shell.
Microfiber-Leather Outer Back
Saddle microfiber leather forms the contrasting outer-back surface. Its smooth face and outlined edges distinguish the shell from the woven inner upholstery. The material schedule treats this as a microfiber-leather component, with its own color and cleaning requirements.
Frame and Low Support Base
A 304 stainless-steel frame is specified beneath the upholstered construction. The low, dark four-foot base supports the body close to the floor. Base sections, connections, finish and glides are coordinated in the chair order drawing.
Two Coordinated Upholstery Surfaces
Dark Microfiber Contrast
The outer back uses a dark microfiber-leather direction. Coordinate its shade, sheen and edge treatment with the gray fabric, since the chair combines two upholstery materials.
Edge and Support Finish
The outline around the outer shell and the dark base contribute to the two-material appearance. Our order confirmation identifies their finish references alongside the upholstery selections, allowing a consistent contrast across repeated chairs.
Fabric and Microfiber Chair Specifications
| Chair type | Upholstered lounge armchair with fabric seating surfaces and a contrasting outer-back shell. |
|---|---|
| Configuration | Gray fabric on the inner seating surfaces, saddle microfiber leather on the outer back, sponge filling and a 304 stainless-steel frame. The dark support finish is coordinated with the outer shell. |
| Overall size | 30.31 W × 33.86 D × 29.13 H in; approximately 770 W × 860 D × 740 H mm. |
| Inner upholstery | Fabric; gray selected appearance. Composition, weave, color and care code by the accepted textile reference. |
| Outer upholstery | Saddle microfiber leather on the outer back; selected dark finish. Color, sheen and edge details by the material schedule. |
| Frame and filling | 304 stainless-steel frame; sponge filling. Internal layers, base sections and connections by the order drawing. |
| Order details | Seat height, clear seating dimensions, base finish, floor-contact detail and cushion attachment coordinated for the order. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Lounge Chair Size and Room Placement
770 × 860 mm Overall Footprint
Overall dimensions are approximately 770 mm wide, 860 mm deep and 740 mm high, converted from 30.31 × 33.86 × 29.13 in. The front and plan drawing use the same scale for the outside envelopes.
Clearance around the Curved Arms
Allow the full shell width beside a side table or sofa. Keep table corners clear of the upholstered arms and leave an unobstructed approach to the seat. Seating height and clear internal width are each coordinated in the chair drawing.
Care for Two Different Surfaces
Fabric and microfiber leather may need different cleaning methods. The accepted care instructions should address each surface and its edge joints; avoid applying an unidentified leather conditioner to the woven seat or microfiber back.
Two-Material Lounge Chair Quote
Fabric and Microfiber References
Our quotation identifies the inner fabric and outer microfiber references individually. Their composition, finish and required appearance range affect the cover selection and make any material substitution clear.
Frame and Base Details
The frame specification, low-base finish and floor-contact detail belong in the chair schedule. Any special glide or part-specific material requirement is itemized with the relevant component.
Coordinated Room Quantities
Group quantities by room and by the accepted fabric–microfiber combination. A different pair of upholstery references is recorded as a separate selection, while sofas and other seating retain their own product schedules.
Packing and Shipment
Packing protects the curved shell, padded edges and projecting base feet. The quotation states the packed quantity and transport terms for the actual destination, including any requested handling arrangements.
Fabric and Microfiber Chair Supply Items
- Chair
- Complete lounge chair with fabric inner upholstery, microfiber-leather outer back, sponge filling and a 304 stainless-steel frame.
- Material selections
- Accepted inner fabric, outer microfiber and base-finish references, each recorded.
- Separate furniture
- Ottomans, side tables, sofas and rugs, each itemized; the selected configuration is the chair only.
- Packing and shipment
- Protective packing and the agreed transport and destination handling, stated in the quotation.
Fabric and Microfiber Lounge Chair Questions
Which upholstery materials are used?
Fabric covers the inner seating surfaces, while saddle microfiber leather forms the contrasting outer back. Sponge is the filling. Each upholstery surface receives its own accepted material and color reference.
Is the outer shell genuine saddle hide?
The outer back uses microfiber leather, a synthetic upholstery material. Its selected reference identifies the color, surface finish and care instructions for the order.
What is the chair size?
The overall size is approximately 770 × 860 × 740 mm, converted from 30.31 × 33.86 × 29.13 in. Seat height and clear internal seating dimensions are each coordinated in the chair drawing.
What metal is specified for the frame?
The frame is specified in 304 stainless steel. The base sections, individual fitting requirements, surface finish and floor-contact details are recorded in the chair order drawing.
How are repeated chairs coordinated?
Use the same accepted fabric, microfiber and base-finish references, with quantities allocated by room. The two upholstery surfaces should be compared together so their contrast remains consistent.
What should be included in the inquiry?
Send chair quantities, room allocation, fabric and microfiber directions, destination and delivery terms. Add a furniture layout where arm clearance or circulation beside tables is tight.
More Lounge Chairs & Ottomans
Fabric Accent Chair with a Wrapped Back and Broad Panel Supports
Leather Lounge Chair with Draped Side Panels
Shaggy Wool Accent Chair with Slender Metal Legs
Leather Lounge Chairs with Black Oak FramesGuides for specifying lounge chairs & ottomans
Request a Quote for the Fabric and Microfiber Chair
Fabric Lounge Chair with a Microfiber Outer ShellGray Fabric with a Dark Microfiber Shell