Fabric Dining Chair with Two Separate Oval Back Pads
Two unequal oval pads sit side by side above the seat, each with its own upholstered edge. Their contrasting beige and brown surfaces define the back profile. The gap and different pad sizes make this chair distinct from a single continuous back cushion.
The separate oval seat has a dark fabric surface beneath the two back pads. High-density foam is the specified filling. The upholstery schedule records the selected pad build, cover references and seams for the seat and back components.
Four dark-finished ash legs support the chair below the seat. Their outward stance frames the upholstered sitting area. The assembly details identify the leg sections, seat connections and floor-contact pieces, apart from the upper back-pad support.
The selected back combines one beige pad with one brown pad. Each fabric reference identifies composition, weave, shade and care instructions. Their placement and edge seams are coordinated as one two-tone package across the ordered chairs.
The dark seat fabric is scheduled alongside the two back fabrics. Its surface character and seam layout are assessed with the complete chair so the three upholstered parts retain a coherent appearance. Cover attachment is recorded with the final pad assembly.
A dark finish coordinates the four ash legs with the seat and back supports. The accepted finish reference defines tone and sheen. The leg wood, upper support construction and floor protectors remain individually identified components in the chair schedule.
| Chair configuration | Armless fabric chair with two unequal oval back pads set side by side, a separate dark seat and four splayed wood legs. |
|---|---|
| Two-tone package | Two unequal oval back pads in contrasting beige and brown fabric, a separate dark seat, high-density foam and dark-finished ash legs. Selected planning orientation: 490 W × 570 D × 810 H mm, based on the 49 × 57 × 81 cm overall size. |
| Overall size reference | 49 × 57 × 81 cm overall size reference. |
| Selected planning size | 490 W × 570 D × 810 H mm; selected orientation for the room furniture layout. |
| Upholstery and filling | Fabric with high-density foam; separate beige, brown and dark seat references with pad build and seams scheduled together. |
| Leg material | Ash wood legs with a selected dark finish; upper support components and connections individually specified. |
| Table and floor interfaces | Seat height, clear sitting width, table spacing, leg stance, floor-contact pieces and packed dimensions coordinated for the order. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The selected planning orientation is 490 mm wide, 570 mm deep and 810 mm high, using the 49 × 57 × 81 cm overall size reference. Front and plan envelopes share one scale. Final seat height and clear sitting width are separate chair fit dimensions.
The open sides allow approach from either side of the seat. Table allocation uses the actual chair width, leg stance and seat level together with the tabletop, apron and adjacent seats. The room layout also provides pull-back space behind the chair.
Floor protectors are selected for the receiving surface and fitted to the actual leg ends. Packed dimensions and any component assembly define the receiving route. Packing protects the separate back pads and projecting legs during handling.
Our quotation identifies the beige and brown back fabrics and the dark seat fabric as a coordinated package. Pad build, seams and chair quantities are scheduled with those references, making each part of the upholstered appearance clear.
The ash legs, selected dark finish, connections and floor-contact pieces form the lower assembly. Upper back-pad supports and their connections have a separate construction specification.
Chair quantities can be assigned to particular tables or rooms while sharing the accepted two-tone arrangement. Different cover or wood selections are each identified. Dining tables and other room furniture remain distinct order items.
Our quotation separates chair supply from protective packing, transport, destination handling and agreed local assembly or placement. The packing list records the actual package quantities and sizes used for receiving.
Yes. Two unequal upholstered oval pads sit side by side above a separate seat. The selected arrangement pairs beige and brown back fabrics with a dark sitting surface.
The chair uses fabric upholstery and high-density foam. Each cover reference identifies its composition, weave, color and care instructions, while the upholstery schedule records the seat and back pad build.
Ash wood is specified for the legs. Upper back supports, seat connections and other concealed components are individually identified in the assembly schedule.
The selected orientation is 490 mm wide, 570 mm deep and 810 mm high, using the 49 × 57 × 81 cm overall size reference. Seat height, sitting width and the final leg footprint remain separate fit details.
The furniture layout combines actual chair width and seat height with the table edge, underside and apron. It also accounts for adjacent chair spacing, the splayed legs and pull-back room behind each seat.
Include chair quantities by room or table, the three upholstery references, leg-finish direction, table information, floor type and destination. Add receiving or local assembly requirements so furniture supply and delivery work can be itemized.
Smoked Ash Dining Armchair with Upholstered Seat & Back
Microfiber Dining Armchair with a Segmented Back
Black Heart-Shaped Bar Stool with a Sled Base
Curved-Back Dining Chair with a Round Seat & Metal Legs