Compact Recessed LED Panel Lights, Round & Square
The round model has a 120 mm-diameter face and a listed body height of 10 mm. It fits a nominal 105 mm-diameter ceiling opening. Its thin white rim surrounds a broad pale diffuser, with spring clips behind the face.
The square model measures 120 × 120 mm across its face and 10 mm high, with a nominal 105 × 105 mm cutout. It gives the same compact family a straight-edged appearance for aligned ceiling layouts. The square opening remains a separate setting-out dimension from the outer trim.
Each shape lists an included 6 W integrated LED source, 540 lm nominal output and CRI 70. Both use aluminum and acrylic materials in white, with listed IP20 and recessed mounting. Shape selection changes the face and cutout geometry without changing these listed electrical and light-output values.
Select LFRO120A when the ceiling schedule calls for a circular trim and round opening. The model line carries the 120 mm body diameter and 105 mm cutout together, keeping trim coverage distinct from the opening used during ceiling preparation.
Select LFSQ120A for a square trim and 105 × 105 mm opening. Coordinate the face orientation with ceiling grids, joints and neighboring fixtures.
Both models list the same three CCT choices. Record shape, model, CCT and quantity on each room schedule, so no fixtures are grouped under a color name alone. The white exterior stays the same; an energized sample establishes the accepted light-color appearance.
| Model family | LFRO120A round / LFSQ120A square; white Aluminum + Acrylic; recessed mounting. |
|---|---|
| Shape and CCT | LFRO120A; 120 mm diameter × 10 mm height; cutout 105 mm diameter; 6 W; 3000 / 4000 / 6000 K. |
| Light source | Each: integrated LED included; 6 W; 540 lm; CRI 70. |
| Body and cutout | Round: 120 mm diameter × 10 mm height, cutout 105 mm diameter. Square: 120 × 120 × 10 mm, cutout 105 × 105 mm. |
| Electrical | Each: 170–265 V listed; actual supply version, driver, frequency and controls scheduled for the project. |
| Installation | Listed IP20. Driver space, ceiling thickness, opening tolerance and clip access follow the offered assembly. |
| Supply | Model/CCT quantities, included drivers and clips, connection parts, samples, documents and freight, each identified. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The round opening is 105 mm in diameter; the square opening is 105 × 105 mm. Ceiling preparation uses the correct geometry for the selected model. Actual opening tolerances and the spring-clip arrangement follow the supplied fixture detail.
The listed 10 mm body height describes the panel; the complete installation void is larger. Space for the driver, wiring, connector and clip operation is coordinated with the offered assembly. Ceiling thickness, access and any required building-system approval are each considered.
Both models list 170–265 V. The electrical schedule identifies the actual supply, frequency and driver arrangement. Room allocations include the selected CCT and shape; dimming, emergency operation and other controls require their own supported version.
Round LFRO120A and square LFSQ120A appear as two quantity lines within one panel order. Each line identifies 6 W, chosen CCT and electrical version. This keeps shape changes clear in purchasing and ceiling schedules.
Our quote identifies the drivers, clips and connection parts actually included with each model. Any extra connection accessories or service access requirements are listed with quantities. Ceiling cutting, patching and field wiring are separate installation work.
A model sample can confirm trim appearance, opening fit and energized light color before the full order. Required electrical documentation names the actual supplied version. Fire, acoustic or insulation-contact requirements need a specifically supported assembly.
Labels distinguish round from square bodies and identify each CCT allocation. Carton quantities, dimensions and shipment weight support the freight plan. Spare quantities, freight and installation responsibilities are stated as their own lines next to the fixture unit price.
LFRO120A has a 120 mm-diameter body and 105 mm-diameter cutout. LFSQ120A has a 120 × 120 mm body and 105 × 105 mm cutout. Both are 10 mm high and list the same 6 W LED, 540 lm output and CRI 70.
The square model is listed for a 105 × 105 mm opening; the round model is listed for a 105 mm-diameter opening. Use the opening geometry for the selected model and confirm the supplied clip detail and tolerance before ceiling cutting.
No. It is the listed panel-body height. Driver, wiring and connector space, clip movement and service access must fit within the actual ceiling arrangement.
No. Both shapes list 3000 K, 4000 K and 6000 K. Specify the CCT and quantity for each model and room. The two shape options in the selector do not limit those separate order choices.
A dimming interface or a ceiling fire requirement needs a specifically supported fixture and driver arrangement. The selected models are basic IP20 recessed fittings; control and building-system approvals are identified in the quote as their own items.
Send us the quantity of each model, CCT by room, actual supply voltage, ceiling thickness and available recess space. Add any control, sample, documentation, spare and delivery requirements so drivers, clips and connection parts can be clearly scheduled.
Compact Surface-Mounted LED Panel Lights, Round & Square
LF-JC-6060-48W Square Office Panel Light
ADM302 Surface-Mounted Reflector Spotlight
AD-CS501-7W Surface-Mounted Cylinder Spotlight