White-Ash Material Reference
White ash is the specified wood material for the table. The material reference accompanies the upper forms and supporting furniture package, while the selected finish establishes their dark appearance.
White-Ash Side Table with Ribbed Multiple Supports
White-Ash Side Table with Ribbed Multiple Supports
- Table configuration
- Segmented round upper outline over multiple broad curved supporting forms
- Matte-Black White Ash
- White-ash material with a matte-black finish, rounded upper segments and multiple curved ribbed supports; selected project outside layout Ø310 × 430 H mm.
- Selected project layout
- Ø310 mm outside diameter × 430 H mm overall
Rounded Upper Segments & Multiple Curved Supports
A Segmented Circular Outline
The upper forms sit within a round outside outline, with soft, rounded segments in place of a single plain disc. Their curved edges continue into the supporting forms, giving the tabletop area a sculptural appearance from above.
Broad Curving Supports
Multiple broad blade-like supports curve down toward the floor. Dark open gaps separate the forms, allowing their individual outlines to read clearly. The base differs from a closed cylindrical drum or a conventional four-leg frame.
Fine Ribs on the Lower Faces
Close vertical ribbing runs across the lower support faces. The ribs follow the broad curves without closing the dark gaps between them. Smooth upper contours and fine lower ribs create different textures within the same black furniture piece.
White Ash, Matte-Black Surfaces & Vertical Ribs
A Matte-Black Surface
The selected finish is matte black. Its low-sheen appearance continues across the rounded upper contours and curved supports, allowing the openings and ribbed faces to define the profile with little surface reflection.
Ribbed Faces & Rounded Edges
The finish reference covers the ribbed lower surfaces, smooth upper curves and exposed edges. Texture consistency and edge appearance coordinate repeated tables. The rib pitch and individual support sections remain component dimensions.
Ribbed White-Ash Table Materials & Selected Layout
| Table configuration | Segmented round upper outline over multiple broad curved supporting forms |
|---|---|
| Material package | White-ash material with a matte-black finish, rounded upper segments and multiple curved ribbed supports; selected project outside layout Ø310 × 430 H mm. |
| Wood reference | White ash |
| Selected project layout | Ø310 mm outside diameter × 430 H mm overall |
| Finish | Matte black across the furniture forms |
| Surface texture | Fine vertical ribs on lower support faces with open gaps between the curves |
| Supply unit | One complete side table; seating, lamps and accessories separate |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Round Side-Table Footprint & Seating Position
310 mm Round Outside Allowance
The selected project layout uses a 310 mm round outside diameter and 430 mm overall height. The circular plan shows the outside furniture allowance; the front view uses the same scale for its height envelope.
Reach beside a Chair or Sofa
The compact round footprint can sit beside a lounge chair or sofa. Placement compares the 430 mm top height with the neighboring seat and arm, while keeping the route around the furniture clear.
Gaps, Floor Contacts & Receiving
The curved supports and open gaps sit near the floor. Floor-protection needs accompany the placement requirements. Packed size, handling route and any agreed local placement are identified with delivery.
Ribbed White-Ash Side Table Cost & Supply
One Sculptural Side Table
The furniture line covers one complete table with its rounded upper forms, curved supports and ribbed surfaces. A chair, sofa, lamp or decorative object is a separate item.
Wood & Finish References
Our quotation identifies the white-ash material, selected matte-black finish and ribbed texture. Exposed edges and the junction between smooth and ribbed surfaces belong to that finish package.
Project Layout & Quantities
The request carries the selected 310 mm diameter, 430 mm height and quantities by room or furniture group. Intended surface use and any floor-protection needs accompany the furniture requirements.
Packing & Destination
Packing protects the rounded upper forms, exposed curved edges and fine ribbed faces. Freight, receiving and any local handling or placement are each itemized using the destination and actual package data.
Ribbed White-Ash Side Table Supply Items
- Furniture piece
- Rounded upper forms, multiple curved supports and ribbed lower faces.
- Material and finish
- White-ash reference, matte-black surface and coordinated exposed edges.
- Room layout
- Ø310 × 430 H mm selected project allowance and table quantities.
- Delivery
- Protective packing and agreed freight or receiving; other room furniture separate.
White-Ash Side Table with Ribbed Supports FAQs
What wood is specified for the table?
The material reference is white ash. It is paired with a matte-black finish and the selected curved, ribbed furniture form.
What creates the ribbed appearance?
Fine vertical ribs cover the lower support faces. The broad supporting forms curve toward the floor, with dark gaps remaining between them.
Is the top an ordinary flat round disc?
No. The upper outline is circular, but rounded segment-like forms define its surface profile. Those curves continue into the multiple supports below, with no plain cylindrical body.
What size is used for a room layout?
The selected project outside allowance is 310 mm in diameter and 430 mm in overall height. Individual segment sizes, support sections and floor-contact geometry are separate component dimensions.
What finish is used on the surfaces?
The selected finish is matte black. Its low-sheen appearance coordinates the smooth upper curves, exposed edges and finely ribbed lower faces.
What should a quotation request include?
Include table quantities, room positions, the selected diameter and height, matte-black finish reference and destination. Add intended surface use, floor protection and any receiving or placement requirements. Other furniture and decorative objects are other items.
More Coffee, Side & Console Tables
Hexagonal Marble Side Table with a Reflective Metal Base
Round Stone-Top Outdoor Coffee Table with an Aluminum Loop Base
Black-and-Gold Bubble Side Table
Organic Marble Nesting Coffee TablesRequest a Ribbed White-Ash Side Table Quote
White-Ash Side Table with Ribbed Multiple SupportsMatte-Black White Ash