28 × 11 cm standard outside size
The main purchasing size is 28 × 11 cm measured around the outside of the finished sole. It provides one consistent sample and pack reference for the standard guestroom pair.
White Waffle Open-Toe Guest Slippers
White Waffle Open-Toe Guest Slippers
- Product
- White waffle open-toe guest slippers; open heel entry
- Selected outside sole size
- 28 × 11 cm ·5 mm EPE sole
- Selected lining
- White polyester nonwoven lining
White Waffle Open-Toe Slipper Construction
Open toe with an open heel
The white slipper has a wide textile band across the middle of the foot, with the toe end and heel open. The waffle-textured band gives the guestroom pair a structured textile face; the edge binding follows the opening and sole perimeter.
Selected cotton waffle and nonwoven lining
The selected purchasing construction uses a white cotton waffle band with a white polyester nonwoven lining. Review the upper, lining, binding and seam together on the sample, especially where the foot enters and the upper joins the sole.
5 mm EPE foam sole
The selected sole is 5 mm EPE foam. Keep that thickness with the sole material reference.
Guest Slipper Size and Material Options
Smaller and larger outside sizes
The alternative outsole targets are 24 × 9.5 cm and 30 × 12 cm, with the same selected upper, lining and 5 mm EPE construction. Keep each size identifiable in the sample record and packing list.
White finish, binding and branding
Keep the upper and binding white for a coordinated guestroom pair. A small embroidered logo can be specified on the upper, or artwork can be placed on the pair sleeve; review the placement and inside finish before approving the order.
Selected Hotel Slipper Purchasing Specification
| Product | White waffle open-toe guest slippers; open heel entry |
|---|---|
| Selected outside size | 28 × 11 cm ·5 mm EPE sole |
| Selected upper | White cotton waffle textile; sample-and-order construction target |
| Selected lining | White polyester nonwoven lining |
| Selected sole | 5 mm EPE foam. |
| Outside-size alternatives | 24 × 9.5 cm; 28 × 11 cm; 30 × 12 cm |
| Supply unit | One pair: two slippers; inner-pack and carton pair counts each listed |
| Specified use | Dry indoor guestroom use; outside dimensions are not wearer foot length |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Guest Slipper Room Quantities and Pair Packing
Pairs per room and replacement stock
Specify the number of pairs by room type, then list opening stock and replacement reserves as two figures. A pair contains two slippers; room counts, individual pieces, pairs and packs are different quantities.
Size mix and sample fit
Assign an outside-size mix to the room schedule and review actual fit samples. Outside sole dimensions are not foot length or a universal shoe-size conversion; the band opening and width also affect the fit.
Dry guestroom use and handling
The selected use is dry indoor guestrooms. Wet shower areas, pool decks and outdoor routes need a different product and supporting performance information. Keep storage and replacement routines with the operator’s supplies plan.
Hotel Slipper Samples, Branding and Supply
Upper, lining and sole specification
The quotation identifies cotton waffle band, polyester nonwoven lining, 5 mm EPE sole and the selected outside dimensions. Changes to any of those parts need a new sample reference as well as a revised size label.
Pair sleeves and cartons
List pairs per sleeve or bag, pairs per carton and size separation. Keep the item and artwork reference on the inner packing and carton so the housekeeping team can distinguish sizes without opening every pair.
Logo and sample approval
Provide the logo dimensions and its position on the upper or sleeve. Review the finished pair for seam finish, binding, band coverage and open toe, entry opening and left/right consistency before fixing the order specification.
Delivery stages and replenishment
Separate the hotel-opening quantity from later replenishment, with the destination and required delivery stages. Sample timing, minimum quantities, production period and freight are quoted for the selected size mix, packaging and artwork.
Hotel Guest Slipper Quote Items
- Pair construction
- Waffle upper, lining, edge binding, 5 mm EPE sole and finished outside dimensions
- Room quantity
- Pairs per room, size mix, opening stock and replacement reserves
- Artwork and packing
- Plain pair or logo artwork; sleeve/bag, carton pair count and size labels
- Sample and destination
- Accepted pair reference, destination, delivery stages and order terms
Hotel Guest Slipper Questions
What construction is specified for these guest slippers?
The purchasing specification uses a white cotton waffle band, white polyester nonwoven lining and 5 mm EPE foam sole. The finished sample should keep the upper, lining, binding and sole on the same order reference.
What sizes can be compared?
The selected outside sole targets are 24 × 9.5 cm, 28 × 11 cm and 30 × 12 cm. The 28 × 11 cm format is the main configuration. These measurements describe the finished product; a wearer’s foot length and universal footwear sizes are different measures.
Are the slippers supplied and counted as pairs?
The supply unit is one pair containing two slippers. List the number of pairs per room and pairs per inner pack, distinct from individual pieces and carton counts. Identify each size mix on the room and packing schedules.
Can the hotel logo go on the slippers?
A small embroidered mark can be specified on the upper, or printed artwork can be specified on the sleeve. Provide the dimensions and position, and review the inside embroidery finish as well as the outer face.
Are these slippers suitable for showers or outdoor use?
The selected use is dry indoor guestrooms. Choose a different product and performance requirements for shower, pool-deck or outdoor use.
How should the opening order and replacements be planned?
Start with pairs per room type, then separate the opening quantity, replacement reserve and later delivery stages. Keep the accepted material, outside-size and artwork references for replenishment, with pairs and packs clearly distinguished.
More Guest Amenities
Cotton Drawstring Hotel Laundry Bags
Six-Piece Dry Hotel Guest Amenity Kit
Triple Refillable Wall-Mount Hotel Toiletry Dispenser
Closed-Toe Cotton Terry Hotel Guest SlippersGuides for specifying guest amenities
Request a Hotel Guest Slipper Quote
White Waffle Open-Toe Guest SlippersStandard outsole target