White Cotton Hotel Fitted Sheets with Deep Pockets
The selected sheet uses white 100% cotton woven fabric with a plain-weave direction. The selected construction target is 180 warp ends per inch plus 120 filling picks per inch, recorded as a 300-count order target with the yarn and weave reference.
Sewn corners form a fitted pocket around the mattress position. The selected top-panel and pocket dimensions remain distinct, so an elasticated fitted sheet is not substituted with a flat bed sheet of similar nominal width.
Elastic runs continuously inside the selected lower hem. Elastic width, recovery and the enclosed-hem construction stay with the accepted sheet sample, including the under-mattress holding arrangement.
The main selected sheet has a 150 × 200 cm top panel and 30 cm finished pocket. These are order targets after the agreed laundering process, with manufacturing allowances coordinated to the accepted cotton construction.
The larger option uses a 180 × 200 cm top panel with the same selected 30 cm finished pocket and white cotton fabric. Keep the top width on the size label, since bed-size names vary by market.
The narrower option is 100 × 200 cm with a 25 cm finished pocket. It retains the selected fabric and enclosed elastic but has a different corner and hem layout matched to that finished size.
| Selected fiber and weave | 100% cotton; white plain-woven fabric |
|---|---|
| Selected fitted-sheet size | 150 × 200 cm top panel · 30 cm finished pocket |
| Selected woven-count target | 180 warp ends/in + 120 filling picks/in; 300-count selected order construction |
| Selected corner construction | Sewn fitted corners with a finished pocket |
| Selected lower hem | Continuous enclosed elastic; component/recovery reference matched to accepted sheet sample |
| Finished pocket alternatives | 30 cm for 150/180 cm-wide options; 25 cm for 100 cm-wide option |
| Selected dimensional acceptance | Finished size targets after the agreed wash/dry process; accepted sample controls manufacturing allowance and fit |
| Mattress-fit boundary | Actual mattress plus protector/topper and under-mattress wrap included; pocket depth is not an automatic maximum mattress depth |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Use the actual mattress width, length and depth with any protector or topper included in the bed assembly. The selected finished top-panel dimensions must match that real bed size after the agreed laundry process.
The pocket also needs sufficient fabric and elastic beneath the mattress, with the actual protector and corner shape included in the fitted sample.
Agree washing, drying and conditioning requirements with the sheet sample, then evaluate the top panel, pocket, seams and elastic recovery together. Retain the accepted post-laundry fit and measurement references with the final size schedule.
Quote sheets by the selected 150 × 200 × 30 cm, 180 × 200 × 30 cm or 100 × 200 × 25 cm requirement. Keep piece counts, spare linen and room/bed references separate from fabric-meter quantities.
Retain 100% cotton, white plain-weave direction and the selected 180/120 ends/picks-per-inch targets with the yarn specification. Count evaluation can be requested under ASTM D3775 for the actual woven fabric.
Identify the finished pocket, sewn corners, continuous enclosed elastic and size-label format. Flat sheets, duvet covers, pillowcases, mattress protectors and other bed linen are separate products.
Attach the actual mattress/protector dimensions and accepted laundry-fit requirements to each size. Add required textile documents, sample references, pack counts, destination and delivery stages.
The selected fitted sheet has sewn corners and a continuous elasticated lower hem forming a mattress pocket. A flat sheet does not provide that same corner and under-mattress holding construction.
The top-panel/pocket choices are 150 × 200 × 30 cm, 180 × 200 × 30 cm and 100 × 200 × 25 cm. Use these dimensions when matching the actual mattress; bed-size names vary.
That fit is not automatic. The finished pocket must also provide under-mattress wrap for the elastic hem, with any protector or topper included. Evaluate the accepted fitted sample on the actual complete mattress assembly.
The chosen fabric target is 180 warp ends per inch plus 120 filling picks per inch, with the yarn and plain-weave reference recorded alongside. ASTM D3775 can be used to evaluate end and pick counts of the actual woven fabric.
The selected size targets are after the agreed washing and drying process. Manufacturing allowances and sample acceptance must keep the top panel, finished pocket, seams and elastic recovery together under that process.
Include the finished-sheet size quantities, actual mattress and protector/topper dimensions, laundry requirements and destination. Add the selected cotton/count reference, elastic and size-label needs, sample acceptance, pack counts and spare linen quantity.
Quilted Hotel Mattress Protectors with Elastic Skirts
Quilted Cotton Hotel Bed Runners
Custom Hotel Duvet Covers
Custom Hotel Pillowcases