Rectangular Travertine Table Lamps with Linen Shades
The selected stone body is 200 W x 120 D x 260 H mm, with honed light-beige travertine faces. Its rectangular form shows the material along broad flat surfaces and defined corners. Stone tone, pore treatment and edge finishing are identified in the finish schedule.
A 210 W x 130 D x 20 H mm stone base extends 5 mm beyond the body on every side. A short metal neck carries the shade assembly above the body. Cable routing, internal support and furniture-contact pads are coordinated as part of the complete lamp build.
The selected shade is 360 W x 220 D x 240 H mm. Its broad rectangular face extends beyond the narrower stone body, while the 220 mm depth keeps the side envelope defined. Fabric, lining and mounting ring are scheduled with the lampholder carrier.
A honed finish gives the selected travertine a matte surface with open pores and tonal bands. The finish schedule records filler treatment, surface protection and the intended range of stone appearance. The body and base are grouped as one coordinated stone set.
This package combines an E26 socket with a 120 V supply arrangement,1800 mm cord, inline switch and destination plug. Bulb dimensions and electrical limits are coordinated with the shade carrier and textile shell as part of the electrical component schedule.
The alternate package uses E27 with a 220-240 V electrical arrangement and matching regional cord/plug requirements. The stone body, base and shade dimensions remain the same. The selected package is carried into the inquiry and complete lamp order.
| Lamp type | Rectangular travertine body with linen-blend shade |
|---|---|
| Electrical package | E26 socket;120 V selected cord set;1800 mm cord and inline switch |
| Overall height | 580 mm; selected configuration |
| Stone body | 200 W x 120 D x 260 H mm; honed travertine |
| Stone base | 210 W x 130 D x 20 H mm |
| Shade | 360 W x 220 D x 240 H mm; lower edge 340 mm above table |
| Cord and switch | 1800 mm cord with inline on/off switch |
| Height stack | 20 mm base +260 mm body +60 mm neck zone +240 mm shade |
Open product drawing ↗
The base footprint is 210 x 130 mm; the shade occupies 360 x 220 mm above it. Allow for the larger shade when positioning the lamp beside a wall, curtain or neighboring object. The base plan determines furniture contact while the shade plan determines the upper clearance envelope.
The selected height stack is 20 mm base,260 mm body,60 mm exposed neck zone and 240 mm shade. The shade lower edge is therefore 340 mm above the table, and its top is 580 mm above the same surface. The dimension drawing keeps these datums aligned.
Route the 1800 mm cord toward the intended outlet with the inline switch accessible. The base-pad schedule identifies the contact surface beneath the stone. Room placement also records nearby furniture edges, shade clearance and the intended bulb position within the textile shell.
Price the honed travertine body and slightly wider base as one finish-matched set. The stone line records dimensions, pore treatment, edge finishing and surface protection.
List the 360 x 220 x 240 mm linen-blend shade, lining, mounting ring and metal neck/carrier. Textile color and metal finish are included in the same appearance schedule.
The selected E26/120 V or E27/220-240 V package includes its socket, cord, switch and plug arrangement. The bulb schedule identifies output, dimensions and component limits for the chosen package.
Pack the stone body and textile shade with protection suited to their different materials. The order records assembly method, loose fittings, quantities and position labels for delivery to the project.
The selected travertine body is 200 W x 120 D x 260 H mm. Its base is 210 W x 130 D x 20 H mm, giving a 5 mm projection beyond the body on each side. The finish schedule coordinates both stone pieces.
It combines 20 mm of base,260 mm of body,60 mm of exposed neck zone and 240 mm of shade. The shade lower edge is 340 mm above the table, with its upper edge at 580 mm.
Use the 360 x 220 mm shade plan for clearance from curtains, walls and nearby objects. The smaller 210 x 130 mm base determines the contact footprint on the furniture. Both envelopes appear in the specification schedule.
The selected finish is honed light-beige travertine. The order records the stone-tone reference, pore/filler treatment, edge finishing and surface protection for the body and base together.
The E26 option uses a 120 V electrical arrangement; the E27 option uses 220-240 V. Each coordinates the socket,1800 mm cord, inline switch and destination plug with the selected bulb and shade assembly.
It identifies the finished stone body/base set, shade and carrier, selected electrical set and any bulb line. Packing and assembly instructions separate the stone and textile protection while preserving the product and room labels.
Cordless Mushroom Dining Table Lamp
Gray & Copper Bedside Table Lamps
Articulated LED Desk Lamp with a Long Light Bar
Green Glass Banker’s Table Lamps with Metal Bases