Woven Stainless Steel Mesh Room Divider Panels
The selected infill is crimped stainless wire woven in a plain over-under pattern. Round 1.5 mm wires alternate at their crossings, creating a regular square field. The selected clear opening is 6 mm, with a 7.5 mm center pitch between adjacent wires.
A 304 stainless steel frame surrounds the mesh on all four sides. Its selected section is 25 × 25 × 1.5 mm, giving the complete panel a 25 mm depth. The 1000 × 2000 mm outer frame leaves a 950 × 1950 mm clear mesh field.
The mesh cut measures 970 × 1970 mm, extending 10 mm beyond the clear opening at each edge for retention. The selected attachment detail secures those margins inside the frame. Crimp direction, perimeter finishing and frame joints are coordinated in the fabrication schedule.
The single-panel package contains one complete woven infill and four-sided frame. The selected material is 304 stainless steel for both wire and frame, with a coordinated satin silver appearance and individually recorded surface-finish requirements.
The linked layout uses two 1000 mm-wide frames separated by a selected 20 mm joint. The total run is therefore 2020 mm wide, with the 2000 mm panel height retained. Joint components and supporting attachments follow the room setout.
Fine metallic highlights emphasize the over-under wire crossings while the square-tube frame defines the perimeter. The order keeps mesh appearance, wire ends, frame weld treatment and the selected satin finish together on one surface schedule.
| Infill construction | Crimped plain over-under woven stainless round wire |
|---|---|
| Panel package | 1000 W × 2000 H × 25 D mm · 304 stainless frame and woven mesh |
| Single frame envelope | 1000 W × 2000 H × 25 D mm |
| Frame material and section | 304 stainless steel · 25 × 25 × 1.5 mm square tube |
| Mesh wire and aperture | 1.5 mm wire diameter · 6 mm nominal clear opening · 7.5 mm center pitch |
| Mesh field and cut size | 950 × 1950 mm clear field · 970 × 1970 mm mesh cut |
| Perimeter retention | 10 mm beyond the clear field at each edge |
| Supply unit | One framed panel or selected two-panel run with scheduled joint and support components |
Open product drawing ↗
Use the outside frame dimensions to align the divider with floor joints, ceiling lines and adjacent finishes. The single panel is 1000 × 2000 mm; the two-panel straight run is 2020 × 2000 mm including its 20 mm joint. The actual room opening and installation allowances are recorded on the room plan.
Coordinate the panel attachments with the selected supporting floor, head or jamb construction. The project fixing schedule identifies restraint points, substrates and connection components. Frame depth and joint access are carried into the room section.
Retain the 970 × 1970 mm cut size with a 10 mm attachment margin around the 950 × 1950 mm clear field. The fabrication detail records the mesh edge, attachment method and frame assembly sequence. Adjacent finishes and service openings are coordinated before the mesh and frame quantities are finalized.
List single frames or the selected linked pair, using the 25 × 25 × 1.5 mm section. The frame schedule identifies outside dimensions, corners, joints and the selected satin surface treatment.
The infill line specifies 1.5 mm round wire, 6 mm clear openings and 7.5 mm center pitch. Include the 970 × 1970 mm cut size, edge finishing and 10 mm retention margins for each frame.
For the two-panel layout, include the selected 20 mm joint and its connecting components. Floor, head or jamb attachments and the substrate-specific fixing package are itemized with the room support detail.
Schedule panels by room and orientation, with matching mesh and frame finish references. Protect the woven faces and frame corners during packing, and identify loose connecting and fixing components by their installation position.
The selected round wire is 1.5 mm in diameter. A 6 mm clear space between adjacent wires gives a 7.5 mm center pitch. Crimped wires alternate over and under at their crossings to form the woven field.
The outside frame is 1000 × 2000 mm. Its 25 mm-wide frame face at each opposite edge leaves a 950 × 1950 mm clear mesh field. The selected frame section is 25 × 25 × 1.5 mm.
The 970 × 1970 mm cut extends 10 mm beyond the 950 × 1950 mm exposed mesh field at each edge. Those margins serve the selected perimeter retention detail within the frame.
Two 1000 mm-wide frames and a 20 mm joint produce the selected 2020 mm overall run. The panel height remains 2000 mm, and the joint components are listed with the room support detail.
The project schedule identifies the selected floor, head or jamb support, attachment positions and substrate-specific fixings. The room section coordinates those components with the frame depth, joint access and adjacent finishes.
Provide the room opening, single or linked-panel selection, supporting substrates and alignment. Include the mesh retention detail, selected satin finish, attachment schedule, quantities and room packing references.
Custom Laser-Cut Aluminum Room Divider Screen
Expanded Steel Mesh Partition Panel
Bronze-Tone Perforated Metal Wall Panels
Brass Tube Room Dividers with Open Vertical Spacing