Opal Globe Wall Sconces with Round Metal Backplates
The selected shade is a single 180 mm-diameter opal-glass sphere. Its white glass face surrounds the lamp, with a rear service opening and retaining collar. The globe finish, opening and collar connection are recorded as one coordinated shade assembly.
A 100 mm-diameter, 15 mm-deep metal backplate connects the short rear support to the wall. The selected metal finish is satin brass tone. The backplate, support and collar receive matched finish references and individual component entries.
The selected light source is one G9 LED lamp, requested at 3 W and 3000 K. Lamp envelope, holder and service opening are coordinated with the globe. The order identifies the lamp and electrical component set alongside the chosen supply version.
This package specifies the lamp and electrical components for a 120 V, 60 Hz project supply. It retains the selected G9 holder, opal globe and satin brass-tone body. Connection details and destination requirements are kept with this complete component set.
The alternate package specifies the lamp and electrical components for a 220–240 V, 50 Hz supply. The 180 mm globe, short support and round backplate retain the same selected dimensions and surface treatment.
Both electrical selections use the same opal-white glass and satin brass-tone metal references. The finish schedule includes the backplate, support and retaining collar. The lamp request remains 3 W at 3000 K for the corresponding component package.
| Fixture arrangement | Single opal-glass globe on a short rear support and round backplate |
|---|---|
| Electrical component package | 180 mm opal globe · G9 holder · matched 120 V / 60 Hz lamp and electrical components |
| Globe and overall height | 180 mm diameter globe · 180 mm selected overall height |
| Wall projection | 230 mm to globe front · 140 mm to globe center |
| Round backplate | 100 mm diameter × 15 mm depth |
| Selected lamp request | One G9 LED lamp · 3 W · 3000 K |
| Exterior materials | Opal glass globe · satin brass-tone metal backplate, support and collar |
| Supply unit | One globe sconce with selected holder, lamp, electrical set and scheduled wall attachments |
Open product drawing ↗
The selected globe center is 140 mm from the wall. Adding its 90 mm radius gives a 230 mm overall projection. The 180 mm globe also establishes the overall selected fixture height, with the smaller backplate centered behind it.
The room elevation identifies fixture center, adjacent furniture and nearby finishes. The wall detail coordinates the backplate attachment and supply entry with the actual substrate. Connection space and installation access remain attached to the same light reference.
The selected service opening and collar arrangement provide the access route for the lamp and glass shade. Keep that removal path clear in the room layout. The order lists globe handling, holder access and the corresponding service document with the fixture.
Include one 180 mm opal-glass globe with its selected rear opening and collar. The component schedule identifies the glass surface reference, retaining detail and requested replacement-globe quantities.
List the 100 × 15 mm round backplate and short rear support in the selected satin brass tone. Attach the wall projection and fixing detail to the same body reference.
State 120 V / 60 Hz or 220–240 V / 50 Hz and list the matched G9 LED lamp and electrical components. The selected lamp request is 3 W at 3000 K, with its envelope and service access coordinated.
The quotation identifies the wall substrate and attachment package, room quantities and location labels. Separate glass protection from metal components during packing, with the lamp and service documents assigned to the matching version.
The globe center is selected at 140 mm from the wall. The 180 mm globe has a 90 mm radius, so its outermost point is 230 mm from the wall plane.
The opal glass globe is 180 mm in diameter. The centered round backplate is 100 mm in diameter and 15 mm deep, with a short metal support between the backplate and globe collar.
The selected lamp and electrical component set match either 120 V / 60 Hz or 220–240 V / 50 Hz. The globe, metal body, G9 holder format and outside dimensions remain the same.
The selected request is one G9 LED lamp at 3 W and 3000 K. Its envelope and supply version are coordinated with the holder, globe interior and service opening in the complete component schedule.
The selected rear opening and retaining collar establish the shade-removal and lamp-access route. The room layout keeps that path available, and the order includes the corresponding handling and service document.
Provide the fixture locations and quantities, electrical supply, wall substrate and backplate connection detail. Add the chosen finish references, requested spare globes, service access and room packing labels.
Plug-In Swing-Arm Wall Sconce
Chrome LED Vanity Mirror Lights
Double-Arm Brass Wall Sconces with Linen Shades
Rechargeable Cylindrical Wall Sconce