Tall Cylindrical Fabric Floor Lamps with Three Lampholders
The selected shade is a continuous 300 mm-diameter, 1450 mm-high cylinder of ivory linen-blend fabric on internal metal rings. Its lower edge is 50 mm above the floor, placing the top at the selected 1500 mm overall height. The fabric seam and ring connections are recorded in the shade detail.
A central black metal stem carries three selected lampholders at 350, 750 and 1150 mm above the floor. Each has a requested 6 W, 3000 K LED lamp. Holder orientation and lamp envelopes are coordinated with the cylindrical shade and internal frame.
The selected weighted-base arrangement is 380 mm in diameter and 30 mm high. It supports the central stem below the narrower 300 mm shade. The body package identifies base construction, stem attachment, cord exit and the black metal surface.
This version uses three E26 holders and matched components for a 120 V, 60 Hz supply. Its three requested LED lamps are each 6 W at 3000 K. The foot switch, cord and destination plug form part of that electrical package.
The alternate uses three E27 holders with matching components for 220–240 V, 50 Hz. It retains the same cylinder, base, holder positions and LED lamp request. The selected supply and destination plug stay attached to the complete assembly reference.
Both versions pair the ivory woven shade with black metal rings, stem and base. The finish schedule records fabric weave, seam orientation and metal treatment. The electrical version has its own entry, independent of these appearance references.
| Lamp arrangement | Continuous fabric cylinder with three vertically arranged lampholders |
|---|---|
| Electrical and holder package | 120 V · 60 Hz · three E26 holders · three requested 6 W / 3000 K LED lamps |
| Overall height | 1500 mm |
| Selected shade | 300 mm diameter × 1450 mm height · lower edge 50 mm above floor |
| Selected base | 380 mm diameter × 30 mm height · black weighted-base arrangement |
| Holder centers and lamp request | 350 / 750 / 1150 mm above floor · three lamps, each requested 6 W / 3000 K |
| Shade and frame materials | Ivory linen-blend fabric on metal rings · black central stem and base |
| Supply unit | One complete selected lamp with three holders, matched lamps, foot switch and 2000 mm cord |
Open product drawing ↗
The 380 mm round base sets the selected floor footprint beneath the 300 mm cylinder. Locate the lamp using the base and its 1500 mm overall height, then coordinate nearby furniture, circulation and the accessible foot switch on the room plan.
The shade runs from 50 to 1500 mm above the floor. The base occupies the lower 30 mm, leaving a selected 20 mm separation between base top and shade lower edge. Internal lamp envelopes, ring positions and service access are coordinated with the holder layout.
The selected cord length is 2000 mm. Establish a route from the base to the supply point and keep the foot switch accessible beside the lamp. The component package identifies the corresponding plug, switch and service documents for the chosen version.
Include the 300 × 1450 mm selected shade, internal rings and attachment details. Record the ivory fabric reference, seam direction and protective packing needed for the continuous cylinder.
List the black central stem and the 380 × 30 mm round base. The assembly schedule retains the 1500 mm overall height, 50 mm shade lower edge and the selected stem-to-base connection.
Specify the E26/120 V or E27/220–240 V version, all three holders and their matched LED lamp requests. Include the foot switch, 2000 mm cord, destination plug and internal component arrangement.
Assign quantities by room and electrical version. Keep fabric and metal references with the item schedule, and separate shade protection from base and loose electrical components in the packing plan.
The selected shade is 1450 mm high with its lower edge 50 mm above the floor. Its top is therefore 1500 mm above the floor. The 30 mm-high base leaves 20 mm between the base top and shade lower edge.
Their selected centers are 350, 750 and 1150 mm above the floor. The internal stem, holder orientation and lamp envelopes are coordinated with those positions and the cylindrical shade.
The 120 V / 60 Hz version uses three E26 holders; the 220–240 V / 50 Hz version uses three E27 holders. Each package includes matched lamp components, a foot switch, a 2000 mm cord and the destination plug.
The selected request is three LED lamps, each at 6 W and 3000 K. Their envelopes and service access are coordinated with the chosen holders, internal frame and fabric cylinder.
Use the selected 380 mm base diameter for the floor footprint. The shade is 300 mm in diameter and the complete lamp is 1500 mm high. Include the foot switch, cord route and nearby furniture positions on the same layout.
List room quantities, electrical versions and destination plugs. Add the fabric and black-metal references, holder/LED component schedule, service access, shade protection and delivery labels.
Brass-Finish Arc Floor Lamp with Linen Drum Shade
Copper & Black Reading Floor Lamps
LED Torchiere Uplighter Floor Lamp
Oak Tripod Floor Lamps with Pleated Linen Shades