Housing and Hinged Cover
This package includes the selected steel housing, brass hinged cover and listed mechanical fixings. It establishes the recess and access arrangement for the equipment scheduled to that location.
Recessed Floor Outlet Boxes with Hinged Brass Covers
Recessed Floor Outlet Boxes with Hinged Brass Covers
- Enclosure type
- Recessed galvanized-steel floor box with hinged brass cover
- Recessed Floor Box Package
- 120 × 120 × 4 mm brass cover · 100 × 100 × 70 mm steel housing · selected fixings
- Recessed housing
- 100 × 100 × 70 mm below cover underside
Hinged Brass Floor Cover over a Steel Recessed Housing
120 mm Square Brass Cover
The selected square cover is 120 × 120 mm and 4 mm thick. A rear hinge opens the lid above the housing. A recessed fold-flat lift tab and two cable-exit notches form the selected access details, with the cover top coordinated to the finished-floor datum.
100 × 100 × 70 mm Housing
A galvanized-steel recessed housing sits below the cover. Its selected outside body is 100 mm square and 70 mm deep beneath the cover underside. The housing detail identifies entry positions, attachment points and the selected device or carrier interface.
Separate Socket Carrier
The alternate package adds a carrier for the project-selected destination socket mechanism. The carrier position and mechanism envelope are coordinated within the housing. Device selection, wiring entries and bonding remain named components of the complete floor-outlet assembly schedule.
Mechanical Housing and Socket-Carrier Packages
Housing with Selected Socket Carrier
The second package adds the selected carrier to the same housing and cover. The project schedule identifies the destination socket mechanism and its mounting interface, together with the required cable route and connection access.
Brass Lid and Galvanized Body
The selected top surface is brushed brass, with the galvanized-steel housing below. Hinge, lift tab, cable notches and exposed fasteners are recorded with that cover reference. The device and carrier retain their own material and connection entries.
Recessed Floor Box Dimensions and Floor Datum
| Enclosure type | Recessed galvanized-steel floor box with hinged brass cover |
|---|---|
| Supply package | 120 × 120 × 4 mm brass cover · 100 × 100 × 70 mm steel housing · selected fixings |
| Outside cover | 120 × 120 × 4 mm |
| Recessed housing | 100 × 100 × 70 mm below cover underside |
| Selected floor cutout | 104 × 104 mm · nominal 2 mm housing allowance per side |
| Vertical datum and total depth | Cover top at finished floor · 4 mm cover + 70 mm housing = 74 mm recess depth |
| Cover access details | Rear hinge, recessed fold-flat lift tab and two cable-exit notches |
| Supply unit | One selected enclosure package with listed fixings and scheduled destination device interfaces |
Open product drawing ↗
Floor Cutout, Recess Depth and Device Interfaces
104 × 104 mm Selected Floor Cutout
The selected floor opening is 104 mm square around the 100 mm housing, giving a nominal 2 mm allowance at each side. A centered 120 mm cover overlaps that cutout by 8 mm per side. Floor finish edges and the cover seat are coordinated with these dimensions.
74 mm Total Depth from Floor Level
The cover top is the finished-floor zero datum. The 4 mm cover occupies the first 4 mm below it, and the 70 mm housing is scheduled below the cover underside. The resulting selected recess depth is 74 mm from the finished-floor plane.
Device, Cable Entry and Bonding
Identify the destination socket mechanism, carrier and rear connection envelope with the project electrical schedule. Coordinate cable routes, housing entries and bonding with the floor build-up. The lid swing and cable exits remain accessible in the floor layout.
Floor Box Cover, Housing and Carrier
Brass Cover Assembly
List the 120 × 120 × 4 mm cover, rear hinge, recessed lift tab and two cable-exit notches. The order identifies the selected brushed surface and exposed fastening details.
Recessed Steel Housing
Include the 100 × 100 × 70 mm selected housing and listed mechanical fixings. The floor detail records its position beneath the cover, entry locations and the 104 mm cutout basis.
Carrier and Device Schedule
For the carrier package, list the selected carrier and its socket-mounting interface. Destination device, wiring and bonding components are individually identified on the complete assembly schedule.
Floor Locations and Packing
Assign quantities by floor location and equipment reference. Include the floor datum, lid access, component labels and protection for the brass surface, with matched carriers and fixings grouped for each box.
Recessed Floor Outlet Box Order Contents
- Cover
- Brass lid, hinge, recessed lift tab and cable exits
- Housing
- Selected steel enclosure, entry positions and mechanical fixings
- Device interface
- Socket carrier where selected, destination mechanism, wiring and bonding schedule
- Floor detail
- 104 mm cutout, 74 mm total depth, cover seat, locations and finish protection
Recessed Hinged Floor Outlet Box Questions
How are cover, housing and cutout sizes related?
The cover is 120 mm square, the housing is 100 mm square and the selected cutout is 104 mm square. A centered housing has a nominal 2 mm cutout allowance per side; the centered cover overlaps the cutout by 8 mm per side.
How is the 74 mm recess depth measured?
Measure downward from the cover top at the finished-floor datum. The 4 mm cover is followed by the 70 mm housing below its underside, giving a selected total of 74 mm.
What changes in the socket-carrier package?
The basic package supplies the housing, hinged brass cover and listed fixings. The alternate adds the selected carrier for the destination socket mechanism. The device mounting and connection envelope are coordinated with that carrier.
How is the lid opened and how do cables leave the box?
A recessed fold-flat lift tab opens the rear-hinged cover. Two cable-exit notches provide the selected cable routes at the cover edge. The floor layout coordinates access to the lid and those exits.
What belongs in the electrical interface schedule?
Identify the destination socket mechanism, carrier position, wiring entry and connection envelope. Include the bonding arrangement and cable route with the actual floor build-up and supporting detail.
What information completes a quotation?
Provide floor locations and quantities, the chosen package, floor build-up and datum. Add the selected device interface, cable entries, bonding, finish reference and the required component labels and protective packing.
More Switches & Outlets
ABG Regional Wall Socket Modules
ABG Telephone, Network & Satellite Wall Modules
ABG Tempered-Glass Mechanical Rocker Wall Switches
ABG Tempered-Glass Touch Wall SwitchesRequest a Recessed Floor Outlet Box Quote
Recessed Floor Outlet Boxes with Hinged Brass CoversHousing and Hinged Cover