Asymmetric stone console table
The console has a long rectangular stone top with softly rounded corners. A light veined surface runs across its length above a slim edge. The top spans two supports, leaving the space between them open with no drawers or cabinet body.
The two supports have deliberately different profiles. A wide cylindrical form with vertical ribbing stands on the left; a much narrower white-and-dark-green support stands on the right. Their unequal widths and contrasting surfaces define the front elevation while preserving an open view beneath the top.
Warm metal-tone rings frame the upper and lower ends of the wide support. The narrow support meets a circular plate at floor level, while a smaller metal accent sits below the top. These parts connect the different support finishes through the same warm reflective color.
The top material is Fendi White natural stone. Its pale surface carries soft gray veining that continues toward the rounded ends. The selected stone, surface finish and edge treatment form the tabletop specification; the actual slab determines the vein pattern across each piece.
The metal elements are specified as stainless steel with a vacuum-plated bronze-gloss finish. Their reflective warm tone contrasts with the pale top and textured support surfaces. This is a coated stainless steel specification, with the finish color recorded alongside the underlying metal.
The support material package combines leather finishes and natural stone with the coated steel elements. Visually, the broad ribbed form contrasts with the smoother white and dark green surfaces on the narrow support. The finish layout records the material assigned to each surface along with color, texture and seams.
| Table configuration | Freestanding console table with a long stone top and two asymmetric support profiles |
|---|---|
| Selected material package | White natural stone top with asymmetric supports combining natural stone, leather finishes and bronze-gloss coated stainless steel |
| Top material | Fendi White natural stone; slab appearance, surface finish and edge treatment by selection |
| Metal material & finish | Stainless steel with a vacuum-plated bronze-gloss finish |
| Support appearance | Wide vertically ribbed cylinder beside a narrow white-and-dark-green support; warm metal-tone rings and round base plates |
| Order dimensions | Overall length, depth, height, tabletop thickness and support positions stated in mm or inches |
| Assembly & floor interface | Top-to-base connections, floor-contact protection, any restraints and destination assembly specified with the order |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Against an entryway or hallway wall, the long top provides a display surface with open space below. The furniture layout uses the full projection of both the tabletop and the circular feet. Door movement, wall trim and the route past the console are considered alongside that footprint.
Behind a sofa, the console’s overall height and length are coordinated with the actual sofa back. Both support positions remain part of the layout, including the wider ribbed form and the round foot beneath the narrow column. The open center is a visual feature and is not specified as a seat or equipment bay.
A table lamp or display object uses the selected stone surface and agreed support capacity. A wall mirror or artwork has its own fixing and does not rely on the console for support. The installation plan identifies level floor contact, any protective pads or restraints, and the route for a lamp cord where one is required.
The top is priced with its selected stone, overall dimensions, edge thickness and edge treatment. Veining and surface finish belong to the same material choice. A different stone or tabletop outline changes that specification as well as the color.
The wide ribbed support and narrow contrasting column are specified together with the natural stone, leather and metal finishes. Their positions and finish layout form one complete base arrangement. A request for different support proportions or positions is a new configuration with its own quote.
The coated stainless steel rings, plates and other specified metal parts have their own finish reference. Tabletop-to-base connections, floor-contact parts and any restraint fittings are identified with the assembly details. These details define the complete freestanding table, with no wall-mounting system.
The stone edges and finished support surfaces need protection within the packing arrangement. Our quote identifies the packed components and any assembly required at the destination. Packing, freight, duties, unloading and local assembly are itemized, with lamps, mirrors and decorative objects listed as their own items if required. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The top is Fendi White natural stone. The support package combines natural stone, leather finishes and stainless steel with a vacuum-plated bronze-gloss finish. The finished material layout identifies which surface receives each material and finish.
No. The specified metal is stainless steel with a bronze-gloss coating. The metal substrate and surface finish remain two entries in the order specification.
The actual slab determines the veining across the top. Stone selection includes the background tone, vein appearance and surface finish, with the rounded outline and edge treatment recorded alongside it. Matching pieces are considered together when a project includes more than one console.
The furniture schedule records overall length, depth and height, tabletop thickness and the support positions. The layout also considers the projection of the top and round feet. For sofa-back use, the actual sofa height and the passage behind it are part of the fit assessment.
This configuration is an open console table with two supports and a stone top; it has no drawer bank or enclosed cabinet. Mirrors, lamps, decorative objects and their fittings are separate items unless listed. A wall mirror requires its own wall support.
Our quote identifies the complete table, selected materials, agreed dimensions, connections and delivery condition. Packed components and any assembly at the destination are listed with the furniture. Packing, freight, unloading and local fitting are each itemized.
Hexagonal Marble Side Table with a Reflective Metal Base
Fiberglass Side Table with a Fluid Lacquered Form
Starry Black Marble Round Coffee Table with Curved Steel Supports
Marble Console Table with a Tapered Travertine-Clad Pedestal