Teak lounge chair with white cushions
The low seat frame extends beneath the cushion and meets short block legs at the front. At the rear, angled wood supports create an open triangular outline beside the backrest. This open side structure gives the chair a low, broad stance with the teak frame exposed around the upholstery.
The wood back leans behind the seat and carries its own back cushion. Broad teak armrests project forward along both sides, leaving open space below the arms. The back slats, arm ends and side supports show from every side of the chair.
A thick seat cushion rests on the low frame, with a separate upright cushion following the inclined back. The material specification lists high-density foam cushioning. Their covers and outlined edges complete the seating surface while leaving the wood arms and lower frame uncovered.
Teak is specified for the frame and base, including the exposed arms and supporting wood members. The selected appearance shows a warm wood tone and clear grain. We record timber selection, surface preparation and the final finish reference together for the furniture order.
White fabric covers the seat and back cushions. Thin dark edging follows their borders, separating the pale upholstery from the teak below. The fabric reference, edge treatment and seam placement define the cushion appearance as a coordinated pair.
The seat and back cushions have different shapes and serve different positions on the chair. Their individual dimensions, foam properties and cover details belong in the cushion schedule. Outdoor exposure requirements are tied to the selected fabric and filling package, alongside the wood finish.
| Chair configuration | Low outdoor lounge chair with an inclined back, broad arms and open angled side supports |
|---|---|
| Selected material combination | Exposed teak frame with white fabric seat and back cushions |
| Frame & base | Teak wood; timber selection and finish reference recorded with the order |
| Cushioning | Separate seat and back cushions with high-density foam; numeric density specified on the order |
| Cushion covering | White fabric with dark outlined edges; exact fabric and outdoor exposure requirements specified together |
| Chair dimensions | Overall width/depth/height, seat dimensions and arm height recorded for the selected chair |
| Coordinating pieces | Ottoman, sofa, coffee table and accessory quantities, each listed |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The angled back and rear supports extend beyond the sitting area, so the layout uses the full chair footprint. Overall width and depth, arm height and seat height are each recorded. Space around the side frames keeps the chair accessible, since the outside dimension extends beyond the cushion outline.
A coordinating teak ottoman is a separate piece with its own upholstered top. Its position can be set in front of the lounge chair while leaving room to enter and stand up from the seat. Ottoman size, cushion height and quantity are separate entries from the chair specification.
A low table can sit beside the arm or between a pair of lounge chairs. The furniture plan considers its height and outline together with the chair's rearward frame and the walking route across the patio. The floor-contact details are specified for the deck or paving surface used in the project.
The frame line identifies the teak furniture construction and selected surface finish. Timber selection, grain character and the treatment of exposed arms, back and base are part of that line. Any named timber documentation or finish performance requirement is tied to the actual order.
The cushion package lists the seat pad and back pad individually, with dimensions, cover fabric, edging and filling for each. Numeric foam density and any required fabric performance documentation are included in the selected specification. Decorative pillows and protective covers are accessories with their own lines.
Each lounge chair is listed with its teak finish and white cushion package. Ottomans, sofas and coffee tables are separate furniture items with their own dimensions and quantities. This keeps the single-chair order clear even when several pieces are coordinated for one patio.
Packing protects the exposed wood arms, projecting frame members and pale cushion covers. The quote records packed dimensions, any destination assembly and the required delivery quantity. Freight, unloading and other agreed destination work are itemized for the project location. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The frame and base are specified in teak wood. The exposed structure includes the broad arms, inclined wood back, side supports and lower seat frame. The timber selection and finish reference are recorded with the furniture order.
The chair uses a separate seat cushion and back cushion, covered in white fabric with dark outlined edges. The material specification lists high-density foam cushioning. The order identifies each cushion's size, cover and filling details; decorative pillows are separate accessories.
The ottoman is a separate furniture item with its own teak frame, cushion and quantity. It can be listed alongside the chair when a footrest is required. The chair and ottoman dimensions are specified independently so their heights and placement can be coordinated.
The furniture plan uses overall width, depth and height, including the inclined back and rear side supports. Seat height, usable seat depth and arm height are separate measurements.
The selected fabric is recorded with the intended outdoor exposure, edge treatment and filling package. Any required water-resistance, colorfastness or other performance documentation is tied to that exact material. A protective cover is listed as its own item when it is part of the order.
The furniture family includes a sofa, ottoman and coffee table with related teak and cushion details. Each item keeps its own dimensions, finish and quantity in the quote. Their positions are coordinated around the lounge chair and the circulation space in the patio layout.
Woven Rope Outdoor Lounge Sets
Outdoor Pouf Ottomans with Refillable Inner Liners
Round Stone-Top Outdoor Coffee Table with an Aluminum Loop Base
Modular Aluminum Outdoor Sectional with Open Woven Backs