Recessed ceiling lighting
AD4120 is an integrated LED downlight with recessed mounting and a listed Ø75 mm ceiling cutout. Its listed product diameter is Ø83 mm and its product height is H50 mm. The opening and fixture dimensions serve different parts of the ceiling detail: the cutout sets the opening, while the product size identifies the light fixture. The actual mounting arrangement also depends on the ceiling and electrical package.
The listed materials are aluminum and acrylic, with a white finish. That gives this selection a consistent fixture color across the three listed light-color choices. The ceiling finish, fixture edge and light-emitting face are coordinated as part of the interior lighting selection. Exact optical-opening and trim dimensions are their own figures, distinct from the listed overall product diameter.
The integrated LED source is included. Model data lists 7 W power, 700 lm luminous flux, CRI 90 and a 120° beam angle. These figures describe different lighting characteristics. Room geometry, mounting position and the selected light color remain part of the lighting design, with photometric data specified where the project needs it.
AD4120 is listed with 3000 K, 4000 K and 6000 K color-temperature choices. The selected value is recorded with the fixture quantities so rooms and lighting groups receive the intended light color. These are order selections.
White is the listed fixture finish for this model. Light color and fixture color are two selections: 3000 K, 4000 K and 6000 K describe the LED light, while the aluminum/acrylic fixture remains white. Ceiling paint, nearby luminaires and other fittings can be coordinated with that finish by sample, since a shared color name is no guarantee of an exact surface match.
A room may use one light color throughout or assign different selections to separate areas. The order identifies those groups by room, circuit or fixture reference and quantity. Daylight, decorative lighting and surface colors affect the combined appearance. Spacing and fixture count are calculated from the room lighting requirements, with the listed beam angle and lumen figure as inputs.
| Model & installation | AD4120 integrated LED downlight; recessed mounting; LED light source included. |
|---|---|
| Selected light color | AD4120 in white with included integrated LED, 3000 K color temperature, listed 7 W power and 220–240 V supply. |
| Cutout & product size | Listed ceiling cutout: 75 mm diameter; product size: 83 mm diameter × 50 mm height. Product height is separate from required ceiling-void, driver and thermal clearances. |
| Materials & finish | Aluminum and acrylic; white fixture finish. |
| Listed power & supply | 7 W; 220–240 V. Driver input, supply frequency, connection and control compatibility follow the ordered electrical package. |
| Listed model lighting data | 700 lm luminous flux; CRI 90; 120° beam angle. These are listed model figures, separate from per-CCT photometric data and the room lighting calculation. |
| IP rating & ceiling conditions | IP20 as listed. Ceiling thickness, fixing, driver access, thermal clearances and insulation/fire requirements are defined for the actual assembly and location. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The specification gives a Ø75 mm ceiling cutout and a Ø83 mm product diameter. They are separate dimensions, and neither identifies the optical opening. The ceiling detail uses the actual fixture instructions to establish the opening tolerance, mounting method and permissible ceiling thickness. Existing openings also need their own fit assessment.
H50 mm is the listed product height, and the ceiling-void allowance is set from the full installed assembly. That assembly also needs the driver location, cable and connection space, service access and required thermal clearances. Insulation, nearby building elements and any fire-resisting ceiling system affect that detail. The project uses requirements for the actual fixture and driver, including any applicable insulation-contact or fire provisions.
The listed supply is 220–240 V. Driver input, frequency, connectors and switching are matched to the project electrical system. Dimming requires a specifically compatible driver and control arrangement. A qualified electrician carries out the connection and installation to the selected assembly’s instructions and local requirements. Locations requiring water protection need a luminaire selected for that rating.
Our quotation identifies AD4120 in white, the selected 3000 K, 4000 K or 6000 K light color, and quantities for each room or lighting group. Fixture references keep mixed-CCT orders distinguishable during packing and installation. Any change to model, finish, electrical input or required performance is identified as a separate selection.
The integrated LED light source is listed as included. The quote also identifies the driver, connection components and mounting parts supplied with the ordered fixture package. Required dimming controls or other electrical components are itemized with their compatibility. Ceiling cutting, wiring and site installation are included only when expressly listed.
Those requirements are identified with the quotation so the selected assembly can be assessed against them. The listed 700 lm, CRI 90, 120° beam and IP20 figures remain model data.
Packing keeps white finished faces and light components protected, with fittings associated with their fixture references. Color-temperature identification is especially useful when several selections share the same white exterior. Carton quantities, packing dimensions and delivery destination are specified for the order, along with the fixture and component quantities. Room allocation can be marked on the packing when required. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
Ø75 mm is the listed ceiling opening; Ø83 mm is the listed product diameter. Opening tolerance, ceiling thickness and the fixing arrangement follow the actual assembly instructions. An existing ceiling opening needs a fit assessment before this model is selected as a replacement.
The fitting is 50 mm high; allow extra depth for the driver and cable connections above it. We list the recommended void depth with the specification, and the driver can sit beside the fitting where space is tight.
The model comes in three fixed color temperatures. Select 3000 K, 4000 K or 6000 K for the order and identify quantities for each choice. A switchable or controlled color function needs its own confirmed electrical configuration.
No. Dimming also needs a compatible driver and control system. The ordered electrical package identifies the required input, frequency, connection and any specified dimming arrangement.
No. The available model is rated IP20. A project with those requirements needs a suitable confirmed assembly and the relevant installation evidence.
Our quote identifies the white AD4120 fixture, selected CCT, quantities, listed cutout and size, and its 7 W, 220–240 V basis. It also itemizes the driver, connectors, mounting parts and any specified controls, alongside required lighting or installation documentation. Ceiling preparation, wiring and installation are included only when expressly listed; packing and delivery are identified for the destination.
BLD7350 Wide-Beam Recessed LED Downlight
LF-JC-6060-48W Square Office Panel Light
LDKJ-9350-400 Double-Drum Ceiling Light
AD-CS501-7W Surface-Mounted Cylinder Spotlight