Leather-surface writing desk with ash frame
The brown leather surface extends across the writing area and wraps the front edge. A raised wooden edge runs along the back, giving the desk a defined boundary behind papers and equipment. Usable work depth depends on the actual surface and rear-edge dimensions. The raised edge is a fixed wooden lip, with no cable tray or equipment mounting rail.
One drawer is integrated below the writing surface, with a leather-faced front that follows the desk edge. It provides a separate storage position within the open frame. Usable internal width, depth, height and opening travel determine which stationery or devices will fit. Runner type, closing action, locks and rated load belong to the selected drawer package.
Ash wood is specified for the frame. The open side structures support the top and leave the chair approach open, with a low connecting rail shown between them. Their positions matter for foot space, chair arms and cleaning access.
The warm brown wood appearance is described as a walnut finish, while the frame material is ash. The selected finish reference defines the color and sheen on the frame, rear edge and exposed wood surfaces. Grain and color matching to adjacent furniture need an agreed reference.
Saddle leather is the listed surface material, shown in a brown tone across the top and drawer front. Stitching forms part of the pictured surface treatment. The order identifies the leather reference, color, edge treatment and seam arrangement. Hide grade, tanning method, thickness and any protective treatment require their own material specification.
Dust the surface and drawer with a dry, lint-free cloth. Wipe spills promptly with a lightly damp cloth, then dry the area thoroughly. Use any cleaner or conditioner only when it is suitable for the selected leather and wood coating. A wood-care product should not be applied across the leather writing surface simply because both materials meet at the edge.
| Desk configuration | Writing desk with a leather-covered work surface, raised rear wood edge, one integrated drawer and open side frames. Home-office or study placement; chair and equipment quoted on their own. |
|---|---|
| Selected desk configuration | Brown saddle-leather surface and drawer front with a walnut-toned ash wood frame, raised rear wood edge and one integrated drawer. The leather reference, wood finish, measured size and drawer specification are identified for the order. |
| Frame material & wood finish | Ash wood frame with a warm walnut-tone finish; walnut names the color, and the timber is ash. Exposed finish and connection details are selected for the order. |
| Leather surface | Saddle leather, shown brown across the writing surface and drawer front, with stitched edges. Leather reference, grade, thickness, tanning and protective treatment are specified for the order. |
| Drawer & rear edge | One integrated drawer and a raised wood rear edge are shown. Drawer interior, runners, closing action, travel, handed position, load and rear-edge dimensions are order details. |
| Size & chair fit | Overall width, depth and height with units; clear underside and knee space; chair-arm clearance and drawer opening travel are confirmed for the selected desk. |
| Supply & receiving | Individual desk package with specified drawer fittings, floor-contact parts, assembly format and surface protection. Actual packed dimensions, weight and destination are identified for delivery. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The working layout needs overall width, depth and height together with the clear opening beneath the top. Match those measurements to the actual chair width, arm height and seated position. The drawer and low frame rail occupy different parts of that space. Measured dimensions with identified axes and units are required for the ordered desk.
Allow space for the equipment footprint, writing area and the raised rear edge when arranging the top. A monitor stand, power lead and charging cable can each use part of the work depth. Any clamp or cable-management accessory needs a compatible edge, substrate and fixing detail. Grommets, built-in power and clamp-ready reinforcement are separate equipment requirements.
Place the drawer opening where its full travel clears the chair and nearby furniture. The final drawer position and its usable opening are confirmed for the selected desk. Room planning also includes chair pullback, the walking route and access around the side frames. Receiving access uses the actual packed size and assembly format.
Our quotation identifies the individual writing desk, quantity and room reference, with the selected brown leather and walnut-tone wood finish. Repeated desks need a common material and finish reference. A change in surface, size or drawer arrangement changes the specification; the current appearance is one configuration.
The material package separates the ash frame, leather surface and drawer fittings. Leather reference, wood coating, seam details and the drawer interior and runners define that package. Chairs, lamps, computers and other work accessories are separate furnishings.
Overall dimensions, underside clearance, drawer travel and rear-edge dimensions form the fit information for the selected desk. Equipment loads, clamp details, cable routing and any project-use documentation are identified as requirements before the configuration is agreed. These requirements need the actual desk construction; they cannot be derived from its wood species or pictured proportions.
Packing needs to protect the leather face, stitched edges and exposed wood frame. Our quote identifies supplied fittings, assembly format and responsibilities at the destination. Actual carton dimensions, weight, quantity and receiving access determine the transport arrangement. Price, availability and dispatch terms apply to the confirmed package and destination. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The frame is specified as ash wood with a warm walnut finish. The writing surface and drawer front have a brown saddle-leather reference. Exposed wood finish, leather identity and concealed construction are separate parts of the order specification.
Use measured overall width, depth and height together with the clear underside opening, drawer position and low-rail location. The chair width and arm height need to fit within that opening, with space to sit and pull back. The ordered desk needs dimensions with axes and units.
One integrated drawer with a leather-faced front is shown. Its internal size, runners, opening travel and load need to be stated for the selected desk. Soft-close hardware, a lock and a reversible drawer position are separate features that require confirmation.
Dust with a dry, lint-free cloth. Wipe spills promptly with a lightly damp cloth and dry thoroughly. Choose any cleaning or conditioning product for the actual leather and wood coating. Do not treat the joined leather and wood surfaces as one material or assume that a wood conditioner is suitable for the leather.
A proposed fitting needs its clamp or fixing dimensions checked against the actual desk edge, leather-covered surface, rear wood edge and supporting construction. The equipment load and cable route also belong in that check. No built-in cable grommet, power supply or reinforced monitor-arm fixing is included unless it is specified for the order.
The quotation covers the identified desk quantity, measured configuration, leather and wood finish, drawer fittings and supplied assembly parts. Chair, lamp and computer equipment are separate. Delivery uses the actual packed dimensions, weight, destination and receiving access, with protection for the leather and wood and clear assembly responsibilities.
Synthetic-Leather Desk with a Metal Slat Support
Walnut-Veneer Writing Desk with a Red Metal Frame
S935 Office Workstation with a Side Storage Base
Solid-Wood Desk with a Rounded Top and Asymmetric Legs