Hybrid mattress and bed setting
The selected Queen build allocates 50 mm to the memory-foam comfort layer above the pocket-spring core. Below the core, a 20 mm base-foam layer forms the lower part of the stack. These are specified layer targets for the custom build, with foam grade and the accepted firmness reference recorded alongside. A topper is outside this mattress supply.
A 180 mm pocket-spring core is the selected support component between the memory foam and base foam. The GEORGE offer supports a zoned pocket-spring hybrid; spring count, wire gauge, zone boundaries and edge construction remain part of the accepted core specification. The 180 mm target describes core height.
The finished-height target is 260 mm: 50 mm memory foam, 180 mm pocket-spring core, 20 mm base foam and a combined 10 mm allowance for the top-and-bottom cover and quilting build-up. The cover is a light fabric top with a plain gray border. We confirm fabric composition, closure and care instructions with the cover.
Soft, medium and firm are the three requested comfort choices for the same Queen size and 260 mm height target. The foam response, pocket-spring specification and cover work together to achieve the chosen feel. An agreed sample or build reference establishes acceptance; the labels are not numerical firmness scores or medical recommendations.
The selected visual direction uses a light knitted-look top and a plain gray fabric border. The actual cover material and finish are identified with the ordered mattress.
Foam density describes mass per volume, while indentation force describes a component’s response to compression. They are different properties. The foam grade and component test reference support the comfort selection, but neither alone rates the finished hybrid. Destination-specific fire, chemical or labeling requirements must be matched to the actual supplied mattress.
| Mattress construction | Specified custom Queen hybrid: memory-foam comfort layer above a zoned pocket-spring core and base foam; mattress only. |
|---|---|
| Comfort preferences | Specified Queen 1524 × 2032 mm hybrid with a 260 mm height target and a soft comfort preference. Selected stack: 50 mm memory foam, 180 mm pocket springs, 20 mm base foam and 10 mm combined cover/quilt allowance. Feel acceptance uses the agreed sample/build reference. |
| Ordered dimensions | Selected U.S. Queen size: 1524 W × 2032 L mm (60 × 80 in); finished-height target 260 mm. Accepted manufacturing tolerances recorded with the order. |
| Foam & spring details | Selected stack targets: 50 mm memory foam + 180 mm pocket-spring core + 20 mm base foam + 10 mm combined cover/quilt allowance = 260 mm. Foam grades, spring details and feel reference each specified. |
| Cover construction | Light fabric top and plain gray border; composition, seam construction and care instructions by accepted cover specification. Removable or washable covers only when specified. |
| Base compatibility | Selected interface: level continuous platform sized for 1524 × 2032 mm mattress. Bed/base separate; slatted and adjustable arrangements require a revised compatible support detail. |
| Packing & documents | Actual packing method, packed dimensions and handling instructions; test reports matched to the actual mattress and component list |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open mattress fit diagram ↗
The selected size is U.S. Queen: 1524 mm wide × 2032 mm long (60 × 80 in), with a 260 mm finished-height target. Measure the bed’s clear mattress opening and support surface, which differ from its outside furniture dimensions. The frame must accept this mattress without squeezing it; final finished-size tolerances belong in the accepted order.
A level, continuous platform is the selected bed-base arrangement. The mattress is supported across its underside; the bed platform and center support are a furniture assembly specified on its own. Slatted or articulated bases are alternate interfaces requiring a matched support detail.
The receiving plan considers the actual packed mattress dimensions, room access and handling route. Compression or roll packing is identified only when specified for the selected build, with the applicable storage and recovery instructions. An uncompressed mattress package has different handling needs from a boxed mattress, so the packing method stays with the order details.
Our quotation identifies the selected comfort preference and actual foam-and-spring construction. Foam grade, layer arrangement, core specification and finished height define the product being priced. A comfort label alone is not a complete mattress specification.
The ordered size, finished height, cover material and edge treatment are listed together. A change in the mattress dimensions or cover build is reflected in the actual specification and packing information. Pillow, protector and topper requirements are separate selections.
The supply states whether the mattress is ordered alone or with a bed frame or base specified on its own line. Any support-base requirements stay linked to the mattress build.
The order identifies the actual packing method, packed dimensions, quantity and destination receiving arrangements. Handling instructions and any compression-related conditions follow that mattress build. Delivery terms, timing and any warranty terms are set for the actual order. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
It is a specified hybrid: 50 mm memory foam over a 180 mm zoned pocket-spring core, with 20 mm base foam and a 10 mm combined cover/quilt allowance. The 260 mm total is a design target. The accepted component specification defines the final construction; this is not an all-foam mattress.
Yes. Select soft, medium or firm for the same Queen size and 260 mm height target. The foam, springs and cover are tuned together against an agreed sample or build reference.
This page specifies a U.S. Queen target of 1524 mm wide × 2032 mm long (60 × 80 in), with a 260 mm finished height. It matches the project’s clear mattress opening, which is smaller than the bed’s outside dimensions. Other sizes or heights require a revised build and packing schedule.
No. A level continuous platform is the selected support arrangement. Slatted and adjustable bases require a separate matched detail for the accepted mattress construction; they are not included in this base selection. No slat-spacing limit or adjustable-base approval is inferred from the word hybrid.
No. The actual cover construction and care instructions define those features. Removability, washing and replacement are specified only when included in the selected cover.
The packing method is stated for the selected mattress build. If compression or roll packing is used, the order includes the applicable handling, storage and recovery instructions.
Three-Layer Latex Mattress with a Zippered Knit Cover
Double-Sided Quilted Pocket Spring Mattress
All-Foam Memory Foam Mattress with a Layered Support Core
Bonnell Open-Coil Mattresses with Symmetric Padding