Motorized desk layout
The selected rectangular worktop is 1800 mm long, 800 mm deep and 25 mm thick. Its construction is a wood-based panel with an oak-look laminate face and sealed matching edges. The desk is specified independently from the freestanding storage shown alongside it.
The selected base uses two telescoping steel columns and button-operated motorized adjustment. The design target is 650–1250 mm from finished floor to the upper working surface, including the 25 mm top. Base travel is therefore specified against the complete desk, including the top.
A momentary up/down button control is the selected interface, with a matched motor, control box and power lead. The electrical package is selected for the destination supply. The base package does not add a display, memory presets, wireless charging or an anti-collision function.
The selected worktop has an oak-look laminate face on a 25 mm wood-based panel, with sealed matching edges. The material sample establishes its color and texture. A changed surface or core is reviewed with its effect on the total moving mass.
The selected support system establishes the frame and base components. Their material, surface treatment and finish are named for the order.
Pedestals, credenzas, drawers, screens, monitor supports and cable accessories are their own desk selections. Each included item has its own position and quote line. Storage furniture is coordinated with desk movement and stays put as the worktop rises.
| Desk configuration | Custom executive desk with button-operated motorized height adjustment |
|---|---|
| Selected desk package | Selected 1800 × 800 × 25 mm oak-look laminate worktop on a two-column steel motorized base; finished work-surface height target 650–1250 mm with up/down button control |
| Worktop | 1800 × 800 × 25 mm rectangular wood-based panel; oak-look laminate face, sealed matching edges |
| Lifting assembly | Two-column telescoping steel base; motorized finished work-surface height target 650–1250 mm; moving-load qualification target 75 kg total including top and equipment |
| Controller & power | Momentary up/down buttons with matched motor/control box/power lead; destination supply identified in quotation; memory, display and anti-collision functions only when specified |
| Movement interfaces | Worktop travel, nearby furniture, equipment load, moving cables, connection points and selected cable-management parts |
| Supply | Worktop, lift and controls itemized; storage, accessories, freight, unloading, assembly and electrical work included only where named |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open sit-stand desk specification diagram ↗
The selected 1800 × 800 mm top provides a full-depth equipment surface. The layout keeps at least 850 mm clear knee width and a movement path from 650 to 1250 mm finished working height. Adjacent credenzas, walls and fixed shelves are coordinated against the complete travel envelope.
The moving-load qualification target is 75 kg in total, including the worktop, attached accessories, monitors and other equipment. Worktop mass is deducted before stating the available equipment allowance. The supplied lifting assembly must have matching load and stability documentation.
Cables are routed with enough managed movement for the 650–1250 mm working-height target. A moving cable loop, strain relief and connection location are coordinated with the selected controller. Pinch points, fixed storage and the complete loaded desk are checked across the travel before acceptance.
The base top is 1800 × 800 × 25 mm with an oak-look laminate face and sealed edges. Stone, solid wood, a different panel construction, shaped edges or additional cutouts change the material and moving-load schedule.
The selected lift package has two telescoping steel columns, a matched motor/control assembly and simple up/down buttons. Our quote identifies the assembly offered against the 650–1250 mm finished-height and 75 kg total moving-load requirements.
Separate storage pieces, monitor supports, power modules and cable-management components are named with quantities and locations.
Packing follows the selected worktop, lift components and any storage ordered with it. Freight, access, unloading, assembly and electrical work are itemized with responsibilities and destination. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The selected top measures 1800 × 800 × 25 mm. The finished work-surface height target is 650–1250 mm, measured from the floor to the top face. Other top dimensions or a different height range require a revised lift and clearance specification.
The selected purchase target is 75 kg total moving load, including the worktop and attached equipment. It is a qualification requirement; the proposed lift package must document its actual capacity, stability and applicable operating conditions.
The base selection uses momentary up/down buttons. A memory controller, display or other control feature is an upgrade identified on its own.
The selected top is a 25 mm wood-based panel with an oak-look laminate face and sealed edges. A solid-wood, stone or different panel top changes its mass and may change the lift specification.
The freestanding credenza, chair and room accessories are separate items. The base desk package consists of the selected top, motorized base, control box, buttons and power lead. Cable-management accessories are included only where itemized.
The layout uses the selected 650–1250 mm working-height envelope, at least 850 mm clear knee width and the actual equipment/cable layout. The quoted assembly also identifies destination power, load documentation, packing, assembly and installation responsibilities.
Two-Tone Wood Desk with a Top Storage Compartment
Synthetic-Leather Desk with a Metal Slat Support
Ash-Frame Writing Desk with a Leather Surface and Drawer
Black Oak-Veneer Desk with Six Drawers