W062 high-back mesh chair
The separate headrest adjusts vertically and changes angle to position the head support independently of the backrest. Its mesh surface continues the open appearance of the high back. This is a headrest-equipped task chair; a mid-back chair without that assembly has a lower upper-body envelope and different adjustment needs.
The lower back support forms a separate elastic section beneath the main mesh back. The back and support frame use PP reinforced with fiberglass, and the back frame includes a coat hanger. The separate lower section and open mesh back provide a different support arrangement from a chair with one continuous upholstered back.
The tilt mechanism locks in three positions, while the gas lift adjusts the chair height. The tilt control and height control perform different jobs. The selected chair’s control instructions identify their operation.
The selected configuration uses a black frame and black mesh/fabric surfaces. Mesh covers the headrest and back sections, while the seat is upholstered and padded. The upholstery reference and seams are recorded with the chair package so replacement or repeat orders use the same selected finish.
The arms remain in a fixed position relative to the chair frame. They do not flip upward to clear a desktop and are not described as height-adjustable arms. Their shape and attachment differ from the pivoting-arm W815B task chair, so arm-to-floor and under-desk clearance matter when selecting this model.
The chair uses a black nylon base with casters. The caster and floor pairing is a separate component selection from the mesh upholstery and tilt mechanism. A hard floor, carpet or chair mat can need a different rolling interface.
| Model & configuration | W062 high-back black mesh task chair with separate adjustable headrest and elastic lumbar section |
|---|---|
| Materials & selected package | W062 black mesh chair with PP-and-fiberglass back/support frame, adjustable headrest height and angle, elastic lumbar section, fixed nylon-and-fiberglass arms, three-position tilt lock and black nylon caster base. |
| Listed overall dimensions | 680 mm W × 700 mm D × 1190–1270 mm overall H; seat and arm heights are separate fit dimensions |
| Back & headrest | PP-and-fiberglass frame; mesh surfaces; headrest height and angle adjustment; back-frame coat hanger |
| Armrests | Fixed black nylon-and-fiberglass arms; no flip-up or arm-height adjustment included |
| Controls & base | Three-position tilt lock, gas lift and black nylon caster base; actual control operation follows supplied instructions |
| Supply & fit boundary | Complete selected chair/component package; seat/arm fit, caster-floor pairing, assembly and receiving each listed |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The listed outside width is 680 mm and the listed depth is 700 mm. Those figures describe the chair envelope; the clear seat width and usable sitting depth are smaller. A workstation layout also allows for the caster base, the user entering the seat and the chair moving away from the desk.
The listed overall height range is 1190–1270 mm. It is not a seat-height range. The usable seat dimensions, seat-to-floor height and fixed arm height are the fit measurements needed for a particular user and desktop; the headrest and gas lift are adjusted for the seated position.
Tilting changes the chair’s rearward envelope beyond its upright depth. The layout leaves room behind the high back and clearance for the fixed arms beside the worktop. Under-seat controls stay reachable after the chair is positioned, and the caster route is kept clear of loose cables.
Our quotation identifies the W062 frame, black upholstery reference, separate adjustable headrest and elastic lumbar section. A mid-back chair without the headrest or another mesh frame is a different configuration with its own quote.
The component schedule lists the three-position tilt mechanism, gas lift and caster set supplied with the chair. Required duty, test documentation and floor interface are reviewed against that actual component package.
The supplied chair package identifies the back, seat, arms, base, column, casters and assembly fittings as applicable to its packing arrangement. Assembly instructions and any agreed local setup are each stated. The desk, chair mat and other workstation equipment are other items.
Quantity, upholstery consistency and the packed assembly format affect the order. Packing protects mesh sections, arm surfaces and the base during handling. Destination, unloading and final receiving arrangements are listed independently from the chair’s assembled dimensions. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The selected W062 configuration has no integrated footrest. It uses a mesh high back, separate adjustable headrest, fixed arms and a three-position tilt lock. A chair with a retractable footrest has a different seat and support mechanism.
The headrest adjusts up and down and changes angle. Those adjustments position the head support independently of the chair height and tilt. The supplied control instructions cover its operation.
No. It is the listed overall chair height range. Seat-to-floor height, clear seat width and usable seat depth are separate fit measurements. They are considered with the user, desktop and fixed arm height.
No. The selected arms are fixed nylon-and-fiberglass components. The chair needs enough space for its arms beside or beneath the selected desktop.
The tilt mechanism can be secured in three positions. It is separate from the gas-lift height control.
The schedule identifies the selected chair body, headrest, arms, tilt mechanism, gas lift, base, casters and assembly parts. Upholstery reference, quantity and assembly format complete the chair package. A desk, floor mat, local setup and delivery responsibilities are their own items.
W943 Plush PU Executive Chair with a Retractable Footrest
W818A PU Executive Office Chair with Three-Position Tilt
W201A High-Back Office Chair with Adjustable Black Arms
W815B Mid-Back Mesh Office Chair with Pivoting Arms