W810 Executive Chair appearance
A broad rectangular pad finishes the W810’s tall back. The lower shell curves forward into upholstered side arms around the seat. This enclosing body distinguishes it from the W801’s flared upper wings and outward arm shape.
The chair uses a wood inner frame with PU upholstery and separate seat/back padding. The listed foam density is 45 kg/m3 at the seat and 35 kg/m3 at the back, and the material schedule records each location.
A multifunction seat mechanism and gas-lift column connect the body to a polished aluminum-alloy base. Casters are fitted on the supplied configuration. The component schedule records the actual controls and travel.
The W810 selection uses tan PU with 1 mm cover thickness listed for the model. Its smooth surface follows the padded headrest, arms and seat. The physical sample establishes the final tan tone and sheen across those upholstered surfaces.
The 45kg/m3 seat and 35kg/m3 back figures describe density.
The bright metal base contrasts with the warm upholstered body. Base finish and caster appearance are recorded with the chair order. An alternate floor-specific caster is a separate confirmed component choice.
| Chair model | GEORGE W810 high-back PU executive chair |
|---|---|
| Selected cover | W810 tan PU upholstery over a wood inner frame, with 45kg/m3 seat foam, 35kg/m3 back foam and a polished aluminum-alloy base. |
| Listed overall size | 700 W × 690 D × 1280 H mm; overall dimensions, with adjustment endpoints given on their own |
| Upholstery & inner frame | Tan PU; 1 mm cover thickness listed; wood inner frame |
| Seat & back padding | Seat 45kg/m3 foam; back 35kg/m3 foam. Not a firmness or user-weight rating. |
| Base & mechanism | Polished aluminum-alloy base, casters, gas lift and multifunction seat mechanism; actual controls and travel in final chair schedule |
| Supply boundary | Chair configuration, quantity, assembly state and protected packing; freight and local services each identified |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Use the listed 700 mm overall width when checking the opening between desk pedestals or storage units. The side arms occupy part of that envelope; the full width is not the usable seat width.
The W810 has a listed 690 mm overall depth. Its occupied working position and the room needed to roll away from the desk extend the room-planning task beyond that dimension. Keep the chair clear of rear storage doors and circulation routes.
The listed 1280 mm height describes the overall chair. Working seat height, armrest height and the gas-lift range are each recorded for the quoted components. Desk underside clearance should use the actual arm height at the intended seat setting.
The chair line identifies W810, tan PU and the agreed cover sample. Changes to the cover or padded-body specification appear as explicit revisions in the quotation.
The mechanism, gas lift, aluminum base and casters are separate component details within the chair package. Their exact supplied versions matter when comparing chairs with similar exterior upholstery.
Chair quantity and the agreed assembled or component-packed state affect cartons and protection. The packing schedule distinguishes complete chairs from loose bases, casters and other protected parts.
Destination and shipment arrangement determine the freight line. Carry-in, unpacking and local assembly are each itemized next to chair supply; desks and other office furniture belong on their own lines. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
W810 has a rectangular upper head pad and enclosing lower side arms. Its listed overall dimensions are 700 W ×690 D ×1280 H mm. W801 has a different flared high-back body and a different overall size.
It is PU upholstery, a synthetic covering. The W810 cover is 1 mm thick. A selected physical sample defines the final tan color, texture and sheen.
The seat foam is listed at 45kg/m3 and the back foam at 35kg/m3.
There is no single clearance answer from overall height. Compare the actual armrest height at the intended seat setting with the desk underside, and the 700 mm chair width with the clear desk opening.
No. The chair uses a multifunction seat mechanism and gas lift. The quotation records the exact supplied controls and travel for the chair order.
Chair supply, packing, freight and local assembly are distinct items. State the chair count, destination and required delivery arrangement so any assembly work can be quoted explicitly.
W201A High-Back Office Chair with Adjustable Black Arms
W801 High-Back PU Executive Chair
W943 Plush PU Executive Chair with a Retractable Footrest
Ergonomic Mesh Office Chairs with Recline & Footrest