S951 Steel A-Frame Meeting Table

01 / 03

The S951 combines a continuous rectangular worktop with outward-slanting steel legs. Compare its 1800 mm and 2000 mm lengths, 900 mm depth, board and steel components, cable-access position and individually specified electrical fittings.

Model: S951
S951 Overall Table Size: 1800 mm overall width × 900 mm depth ×750 mm height; S951 continuous rectangular top and outward-slanting steel legs.
Overall height: 750 mm

S951 Overall Table Size 1800 × 900 × 750 mm

1800 × 900 × 750 mm 2000 × 900 × 750 mm

Request a Quote View Product Specifications

S951 Tabletop, Supports & Service Components

Continuous Rectangular Meeting Worktop

The S951 keeps one uninterrupted rectangular surface between its short ends. It is offered at 1800 or 2000 mm long, both 900 mm deep and 750 mm high. The longer choice adds 200 mm of table length without changing the body into the segmented-top, center-pedestal arrangement of the S952.

Outward-Slanting Steel Legs & Crossbeams

Two pairs of angled steel legs leave the middle of the under-table space open. The listed undercarriage uses 40×20 mm steel crossbeams with a 1.5 mm gauge and 1.2 mm steel legs. The complete frame connects the tabletop and supports; steel thickness alone is not a whole-table load rating.

HDF Cable-Access Panel

The product specification includes an HDF access-panel component with an upholstered accent. Its location gives the tabletop a defined route for service fittings. The actual opening, cover and below-table path are coordinated with any selected power or data module.

GEORGE S951 rectangular meeting table with a continuous woodgrain top, four angled steel legs and a marked connection plate

S951 Board Surfaces, Upholstery & Edge Finishes

S951 component schedule and two overall size choices; no new finish or electrical module inferred

25 mm Board Tabletop

The tabletop is specified as 25 mm board with 2 mm PUR edgebanding. The woodgrain appearance is a surface selection on board. Face finish, edge color and the exposed perimeter are carried together in the table order.

Steel Leg Finish & Exposed Connection Plates

Light-colored angled legs contrast with the woodgrain top in the selected appearance. End connection plates show beneath the short edges. The tabletop face, leg finish and plate finish are selected together for the assembled table.

Upholstered Access-Panel Accent

The access-panel component introduces a different texture beside the tabletop. Cover material and color are selected with the actual fitting.

S951 Meeting Table Sizes & Component Specifications

Model	S951
Overall size choice	1800 mm overall width × 900 mm depth ×750 mm height; S951 continuous rectangular top and outward-slanting steel legs.
Tabletop	25 mm board with 2 mm PUR edgebanding; woodgrain face selection
Overall height	750 mm
Steel crossbeams	40×20 mm section; listed 1.5 mm gauge
Steel legs	Outward-slanting supports; listed 1.2 mm thickness
Access-panel component	HDF component with upholstered accent; actual modules and wiring itemized
Minimum order	Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container.
Standards & certificates	Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order.

S951 two listed tabletop envelopes with overall lengths and depth in millimeters and common 750 mm height

S951 Table Length, Chair Positions & Cable Access

1800 mm vs 2000 mm Table Length

The two lengths share a 900 mm depth and 750 mm height. The size comparison shows the full table envelope for each choice. Chair width, pull-back space and the meeting-room route determine the seating layout.

Angled Legs & Chair Positions

The legs project toward the corners below the top. Position chairs around those supports so knees, armrests and chair bases have usable space. The room plan includes occupied chairs and circulation beside the table, in addition to its rectangular tabletop dimensions.

Cable Route & Destination Power Modules

A cable-access position does not specify the connection hardware. List the required power, USB or data fittings, their destination standard and the route below the tabletop. Floor boxes and wall outlets are coordinated with the room.

S951 Table Quote, Accessories & Delivery

Table Length & Complete Frame

The selected 1800 or 2000 mm length establishes the top and matching frame package. Our quote identifies the complete table and its connections, with any alternate surface or leg finish recorded on that item.

Surface & Access-Panel Finishes

The tabletop face, PUR edges, steel finish and upholstered access-panel accent form the finish schedule. Material changes affect the actual item supplied.

Power, Data & Accessories

Power modules, data fittings, cable trays and other electrical accessories are each itemized. Chairs, screens and devices shown in a room reference are other products. Their inclusion is stated in the quotation.

Assembly, Packing & Receiving

The table package records top sections, frame parts, connecting fittings and packing dimensions. The receiving route and agreed assembly responsibility are coordinated before dispatch. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.

S951 Table Supply Items

Complete table: Selected size, top, matching supports and connecting fittings listed as one table assembly.
Finish package: Tabletop face and edges, support finish and access/service accents identified by accepted references.
Optional equipment: Power/USB/data modules, trays and chairs, each itemized; destination electrical approval confirmed on its own.
Delivery & site work: Packing format, receiving and assembly agreed for the project; floor boxes and site wiring are other items.

S951 Meeting Table FAQs

How do the two S951 sizes compare?

The 1800 mm and 2000 mm versions both have a 900 mm depth and 750 mm height. The 2000 mm version adds 200 mm of table length. Chair dimensions and room circulation still determine the seating arrangement.

Is the tabletop solid wood?

The specification is 25 mm board with 2 mm PUR edgebanding. The woodgrain is the surface selection. The order identifies the actual board, face and edge finish.

Are power and USB outlets included?

No. The table includes only the agreed connection package and a defined cable-access component; power modules, USB fittings, cables and destination electrical requirements are each scheduled on their own.

How is the S951 different from the S952 conference table?

The S951 has a continuous rectangular top and open angled steel-leg arrangement. The S952 uses a segmented top and a central panel-base configuration.

Can the chair count be fixed from the table dimensions?

Chair width, armrests, leg positions, end seating and the required circulation space affect the usable layout. Include the proposed chair dimensions when the room is planned.

What should the table quotation include?

List the selected overall size, tabletop face and edges, steel finish, access-panel accent and any electrical accessories. The quote also identifies frame parts, connections, packing and assembly; chairs and site electrical work are included only when listed.