S953 Conference Table with Slanted Panel Supports
The S953 has a broad continuous tabletop with a raised longitudinal insert running through the center area. It is offered in 3600 or 4800 mm lengths, both 1500 mm deep and 750 mm high. The reference shows cable-service positions within that central zone; the actual openings are recorded with the ordered assembly.
Broad slanted panels support the short ends, with an additional upright under the central part of the top. These full panels create a different chair interface from open corner legs. Their positions and connections follow the selected table size and remain part of the complete support package.
The listed construction combines a 25 mm board top with 16 mm board/HDF support components and upholstered faces. Slanted aluminum edging defines parts of the support profile. The order retains these component roles without treating an upholstered appearance as proof of a particular leather grade.
The 25 mm top is listed with 2 mm PUR edgebanding. Its dark woodgrain face and exposed edge are selected together. The same overall appearance can involve different face and edge treatments, so the finished tabletop is identified as one coordinated component.
The selected appearance has dark upholstered support panels, including slanted end faces and a central upright. The actual cover material, color and edge detail are recorded with the supports.
Aluminum edging introduces a narrow metallic line at the panel supports. The longitudinal tabletop insert gives the service area a contrasting surface. Their finish references and joint positions are selected with the table, while power and data modules remain equipment specified on its own.
| Model | S953 |
|---|---|
| Overall size choice | 3600 mm overall width × 1500 mm depth ×750 mm height; S953 continuous tabletop, slanted end panels and central upright. |
| Tabletop | 25 mm board with 2 mm PUR edgebanding |
| Overall height | 750 mm |
| Support components | 16 mm board/HDF panel supports with upholstered faces |
| Edge treatment | Slanted aluminum edging; 2 mm/1 mm PUR edge components |
| Service arrangement | Longitudinal tabletop insert and cable-access positions; actual fittings each specified |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Both listed lengths share a 1500 mm depth and 750 mm height. The 4800 mm version adds 1200 mm of table length. The room layout includes chair pull-back and circulation beyond the tabletop.
The slanted end supports and central upright occupy fixed positions below the top. Arrange chair centers around those panels, especially at the short ends and central seating positions. Check chair bases and armrests against the actual support layout instead of treating the whole underside as clear space.
The longitudinal service area is coordinated with the selected modules and the room power/data route. Opening positions, cable paths and access below the top belong in the furniture schedule. Any powered package needs components suited to the destination; floor boxes and site wiring are separate work.
The 3600 or 4800 mm size establishes the tabletop and matching support arrangement. Our quotation identifies the complete table, connecting parts and the actual delivery format.
The tabletop face, PUR edges, upholstered panel faces and aluminum trim form the finish package. Their accepted references define the appearance being ordered.
Power, USB and data modules are separate scheduled items with their required destination specification. Meeting chairs, devices, floor coverings and other room furnishings shown in the room view are not included in the table price unless listed.
Long tops and full panel supports need a suitable receiving route. The packing list records component sizes and the agreed assembly method. Doorways, elevators and site handling are coordinated with the actual packed parts. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The listed sizes are 3600×1500×750 mm and 4800×1500×750 mm. Both share the same 1500 mm depth and 750 mm height. The larger version adds 1200 mm of table length, with its support and connection package identified for that size.
No. This body uses broad slanted end panels and a central upright, with upholstered faces and aluminum edge details. Chair positions are coordinated around those panels, since the underside is less open than a four-leg table.
The slanted support panels are upholstered, and you choose the cover, faux or genuine leather, and its color. We record the chosen material and color reference in the order so every table matches.
The table and chairs are separate products. The quotation includes chairs only when their models and quantities are listed. Devices and other furnishings in the room view are also separate items.
It defines the service area shown on the S953 worktop. Opening positions, covers and any power or data modules follow the ordered table package.
Record the room access route and the packed dimensions of the top and support panels. The delivery and assembly plan identifies the actual component breakdown, connections and handling responsibility. Overall table length and the size of each packed part are two different figures.
Y1553 Conference Table with Upholstered Panel Legs
Boat-Shaped Conference Tables with Curved Panel Bases
S951 Steel A-Frame Meeting Table
Segmented Conference Tables with Steel Frames