Pleated Leather Armchair appearance
Vertical folds run across the broad upholstered back and turn into the padded side arms. The seat sits inside that continuous outline, above a narrow exposed metal base frame. The pleating and gently flared upper edges define this chair’s appearance.
The supplied material description specifies a pine wood inner frame and multi-density high-resilience foam with down filling. The final cushion schedule identifies the fill arrangement and cover build.
Slim tapered legs support an electroplated stainless-steel base frame. That exposed support keeps the chair visually open at floor level. The base finish is recorded alongside the leather color, including its final sheen and tone.
The brown selection brings out the back folds and padded arm contours. Top-grain leather is the specified cover category. The physical sample sets the final shade, surface finish and natural marking tolerance across the upholstered parts.
Black uses the same pleated chair body and material build. It changes the upholstered color only; the frame design stays the same. Mixed brown and black chair quantities can stay on one coordinated order schedule.
Leather grade and finish, cushion fill and the electroplated base are separate material decisions. The specification uses top-grain leather without upgrading it to an independently guaranteed full-grain grade. Seat feel and final metal tone are settled through the selected samples and component schedule.
| Chair configuration | Broad pleated leather back, integrated padded arms and tapered metal legs |
|---|---|
| Leather color | Brown top-grain leather on the same pleated armchair body, with a pine wood frame, foam/down cushion fill and electroplated stainless-steel tapered legs. |
| Overall & seat dimensions | Project chair schedule: overall W/D/H, usable seat W/D and seat height, set for the order |
| Upholstery | Top-grain leather; approved color and surface sample recorded for brown or black selection |
| Inner frame & fill | Pine wood inner frame; multi-density high-resilience foam and down filling; no numeric density/down ratio specified |
| Exposed base | Electroplated stainless-steel base frame with tapered legs; final metal finish in order schedule |
| Supply boundary | Chair only; quantity, packing and delivery itemized; accessories and local placement quoted on their own |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The flared padded arms form part of the full chair width. Record the overall width and usable seat width as two figures, especially for a reading corner or a pair of lounge seats. Exact chair dimensions are confirmed on the order.
Usable seat depth and seat height determine the seated position. Compare them with the accompanying side table and intended users.
The legs extend from the exposed base frame, so the room plan should use the complete leg footprint. Keep space for access beside the arms and for the actual packaged chair along the delivery route. A room-fit sketch records these interfaces.
Our quote identifies the top-grain leather selection, approved sample and quantities in each color. A change in leather grade or finish is a material change in the chair line.
The pine inner frame and foam/down fill form part of the material schedule. Cushion fill arrangement and any agreed changes are recorded for this chair specifically.
The stainless-steel base finish and leg protection affect the packed package. The packing plan protects leather surfaces and exposed metal individually.
Chair quantity, shipment grouping and destination determine the packing and transport. Side tables, lamps, other furniture, carry-in and local placement are included only when itemized. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The supplied chair description specifies top-grain leather. Brown and black are the two selected leather colors. The final sample and material schedule identify the actual grade and surface finish.
The chair is upholstered in top-grain leather, which is durable and easy to care for. Full-grain leather is available as an upgrade if you want a more natural, open-pore finish.
The material description lists a pine wood inner frame with multi-density high-resilience foam and down filling.
No. Both use the same pleated back, padded arm shape and tapered metal-leg body. Color quantities can be recorded as their own lines within the same chair order.
Record overall width, depth and height, usable seat width and depth, and seat height. Include the complete leg footprint and delivery route.
No. The chair package covers the specified upholstered body and metal base. Tables, lamps, other accessories, freight and local placement are their own items, included when the quote lists them.
Zebra-Print Leather Ottoman with Gunmetal Trim
Compact Leather Swivel Armchair with a Star Base
Leather Lounge Chair with Draped Side Panels
High-Back Leather Lounge Chair with a Contrasting Outer Shell