Hexagonal open-sided table family
The side table has a flat hexagonal top and a natural travertine stone body. Its perimeter gives the piece six sides, distinct from a round disc or a square cabinet form. The top, outer faces and exposed edges are coordinated as one stone selection, with natural variation across adjoining surfaces.
Large rectangular side openings expose a hollow interior below the top. The remaining wall sections and lower edges form the support body, which is hollow inside. The order detail identifies wall and top construction, joints and opening edges, with the clear aperture smaller than the exterior size.
This selection is a freestanding indoor side table beside a chair or sofa. The flat top holds the room items assigned to that furniture position, while the stone body keeps a compact footprint. Seating use, a load rating and exposed outdoor placement are outside this page’s specification; the hollow form is not presented as a stool or step.
Both compact variants measure 15.75 × 15.75 inches in length and width. The lower version is 15.75 inches high; the taller version is 18.75 inches high. Their 3-inch height difference changes the relationship to a seat arm or cushion without creating a different material family or table design.
The selected appearance is beige natural travertine. Color movement, pores and veining are reviewed across the top, outer sides and the opening returns.
Dust with a soft microfiber cloth, wipe light dirt with a damp cloth and dry the surface promptly. Use a pH-neutral cleaner suitable for the accepted travertine treatment, and avoid acidic cleaners. Coasters and mats keep drinks and hot objects off direct stone contact; ongoing sealer care follows the actual finish used.
| Table configuration | Freestanding indoor hexagonal travertine side-table family; flat top, hollow body and large open sides. |
|---|---|
| Compact height options | 15.75 × 15.75 × 15.75 in L × W × H (400.05 × 400.05 × 400.05 mm); compact open-sided travertine side table. |
| Shared compact footprint | 15.75 × 15.75 in overall L × W = 400.05 × 400.05 mm. |
| Material and finish | Beige natural travertine stone body. Top, outer faces, pores, surface treatment and opening returns scheduled together. |
| Height difference | 18.75 - 15.75 = 3 in (76.2 mm). Select against the actual chair/sofa arm or cushion height and reach. |
| Assembly and handling | Top/wall joints, opening edges and floor-contact detail by accepted assembly. Finished weight and handling points listed for delivery. |
| Supply | Individual tables by selected height and quantity. Pairing, finish sample, floor pads, packing, freight and placement each listed. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The lower table is 15.75 inches high (400.05 mm); the taller table is 18.75 inches high (476.25 mm). Select the height against the actual seat cushion or arm and the intended reach from that seat. The two heights belong to the same compact family and use the same overall length and width.
The compact length and width are each 15.75 inches (400.05 mm). The size schedule records overall extents. The room layout sets which opening faces the chair and keeps the table clear of door travel, recliner mechanisms and the circulation route.
The order packing list identifies the finished table weight and the supported handling points. Protect the floor and use pads compatible with the accepted stone and floor finish.
The quotation states the selected compact height, table quantity and accepted travertine range. A paired order can mix the two heights while remaining one product family. Stone selection and surface treatment are identified independently from the number of tables required.
The hollow body adds opening returns and interior edges to the finish work. The actual top, wall and joint detail determines the stone work. These surfaces are priced with the outer body, so the quotation covers the opening edges as well as the top face.
The table line specifies each height and quantity. Single tables and two-piece sets are itemized with their actual quantities. Armchairs, sofas, lamps and accessories are separate room items unless included as distinct lines.
Packing protects the top perimeter, stone faces and opening edges. Freight, unloading and internal placement are assigned for the actual destination and handling route. Quantity, accepted finish, finished weight and packing method determine the order’s commercial and logistics schedule. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
No. The table has a hollow body with large side openings beneath a flat top. The remaining stone-bodied sides support the top. Top and wall construction, joints and opening edges are identified by the accepted assembly.
Both are 15.75 × 15.75 inches in length and width. The lower option is 15.75 inches high; the taller option is 18.75 inches high. Exact metric conversions are 400.05 × 400.05 × 400.05 mm and 400.05 × 400.05 × 476.25 mm, respectively.
The quotation states the quantity at each height. Single tables and pairs are itemized explicitly. A single table, matching-height quantities or a mixed-height pair can be listed clearly in the same schedule.
Compare the actual seat arm or cushion height and the user’s reach to the 15.75-inch and 18.75-inch options. The taller choice adds 3 inches (76.2 mm) on the same compact footprint. Recliner travel, door movement and circulation are kept outside the table’s placement area.
No. This specification is for an indoor side table, with no seating or step function. Projects requiring a stool, outdoor table or tested load rating need their own product specification.
Dust with a soft microfiber cloth, wipe lightly with a damp cloth and dry promptly. Use a compatible pH-neutral stone cleaner and avoid acidic products. Coasters and mats protect direct contact areas; the accepted surface treatment determines the ongoing sealer and care schedule.
Marble Console Table with a Gold Spiral Base
White Stone Console Table with Asymmetric Supports
Square Outdoor Side Table with a Black Glass Top
Hexagonal Marble Side Table with a Reflective Metal Base