Smoked Ash Dining Armchair with Upholstered Seat & Back
The smoked ash frame stays exposed around the seat and below the back cushion. Four splayed wood legs carry the chair, while the side members rise into narrow arms. The exposed frame gives this dining armchair a different seating interface from an armless side chair.
A padded seat and a separate rounded back sit within the wood frame. The back has button detailing in the selected appearance. Shaped foam forms the cushions. The upholstery schedule records the actual cover reference, padding specification and seam treatment.
The exposed arms provide a defined resting edge beside the seat. Their height and the underside of the table apron determine how far the chair can tuck in. Arm clearance is checked against the actual table assembly, including any rails below the tabletop.
Leather is available for the seat and separate back. The dark reference appearance combines a smooth upholstered seat and button-detailed back with the smoked wood frame. The accepted cover reference identifies the leather grade, color and surface finish.
A fabric cover is also available on the same armchair configuration. Textile texture changes the seat and back surfaces while retaining the exposed arms and wood legs. The order records the fabric reference and seam layout, with any requested performance requirement tied to that textile.
The smoked ash frame and legs remain exposed around the upholstery. Coordinate their dark wood tone with the selected leather or fabric and other dining furniture. The accepted wood finish reference carries the tone and grain appearance into the order.
| Configuration | Smoked ash dining armchair |
|---|---|
| Upholstery choice | Smoked ash frame and legs with shaped-foam cushions and a leather cover; leather grade, color and finish selected for the order. |
| Frame & legs | Smoked ash wood; exposed arms and four splayed legs |
| Selected seat height | 460 mm above floor; adopted project basis |
| Selected overall envelope | 600 W × 600 D × 820 H mm; project planning dimensions, confirmed on the fabrication drawing |
| Selected arm height | 660 mm above floor; table-apron clearance follows final chair/table drawings |
| Cushions & cover | Shaped foam; leather or fabric upholstery; actual grade and padding specification itemized |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The selected project layout uses a 600 mm overall width and 600 mm overall depth, with an 820 mm overall height. These planning dimensions are confirmed on the fabrication drawing. The drawing shows the chair footprint and, as a second area, the room space needed to pull it away from the table.
The same planning configuration sets the seat at 460 mm and the arms at 660 mm above the floor. Compare the arm height with the table apron as well as the tabletop height. The upholstered seat level and arm profile are resolved in the final fabrication drawing.
Count chairs around the actual table using each 600 mm planning envelope. Adjacent arms need usable separation, and occupied chairs need a clear route behind them.
The chair item includes the smoked ash frame, four legs, arms, padded seat and separate back. The quotation carries the selected project envelope with the complete assembly. Tables, loose cushions and other furniture are separate products unless listed.
Leather or fabric, cover quantity, padding specification and frame finish define the material package. A change in cover is recorded on this same armchair configuration. Any requested fire, abrasion or cleaning requirement needs a corresponding material specification and evidence.
Group the chair quantities by dining area, cover reference and frame finish. Repeated rooms can share one chair selection while retaining packing marks for their destinations. Spare chairs or replacement covers are listed only when included in the agreed order.
The packing schedule records the actual chair or component dimensions and protective packaging. Receiving access, final assembly and floor-contact protection are identified in the delivery plan, using the confirmed packed size and assembly format. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The listed frame and legs are smoked ash wood. The wood remains exposed around the seat, along the arms and down the four legs. The order identifies the actual frame finish; no hidden metal frame is inferred from the upholstery.
Yes. Both cover types are listed for this armchair. The seat and separate back keep the same frame arrangement. Specify the actual leather or fabric reference, color, seam treatment and any material performance requirement with the order.
The selected planning basis is 600 mm wide, 600 mm deep and 820 mm high, with a 460 mm seat and 660 mm arms. These are chosen project dimensions, and the supplied chair geometry is established by its fabrication drawing.
No. The planning arm height is 660 mm above the floor. Compare that level and the arm profile with the lowest table apron or rail.
Shaped foam is listed, and the actual padding and cover are specified for the order.
Include chair quantity, selected project dimensions, leather or fabric reference, wood finish and the tables they will accompany. Identify any material performance requirement and the receiving location. We separate the chair assembly from packing, delivery and site assembly.
Microfiber Dining Armchair with a Segmented Back
Black Heart-Shaped Bar Stool with a Sled Base
Leather Dining Armchair with Open Side Cutouts
Vivienne Swivel Dining Chair with a Padded Split Back