Black Fixed Bar Stool with Square Stainless Steel Base
The black upholstered seat curves upward into a rounded back. Rebound-foam padding and a fabric cover are listed for this configuration. The compact backed shell differs from a backless saddle seat and gives the chair a defined rear profile beside a bar counter.
A single brushed stainless steel post joins the seat assembly to the plate base. This is a fixed-height, non-swivel configuration. No gas lift, height lever or rotating seat mechanism is included; we confirm the seating level with the ordered chair.
A square metal plate forms the floor footprint, with a U-shaped footrest projecting forward from the post. Both sit below the seat. Their positions affect foot space, neighboring stool spacing and access along the counter, so the base and seat are planned together.
Black fabric covers the padded seat and back, with rebound foam beneath the upholstery. The material schedule records the textile reference, surface texture and padding specification. Keep the accepted black cover reference consistent across a repeated bar-seating order.
The metal structure uses 201 stainless steel with a brushed or hairline finish. The post, plate and footrest carry a coordinated silver-toned appearance. The accepted metal finish reference identifies the surface direction and tone for the complete stool.
Black upholstery and brushed silver-toned metal are the selected appearance package. The square plate and forward footrest remain part of this body. Material references are retained with the complete stool so the seat cover and metal finish stay consistent along a repeated bar run.
| Configuration | Fixed-height, non-swivel backed bar stool |
|---|---|
| Appearance package | Black fabric-upholstered seat and back with rebound-foam padding, brushed 201 stainless steel structure, square plate base and forward footrest; fixed height, non-swivel. |
| Metal structure | Brushed / hairline 201 stainless steel; square plate base and forward footrest |
| Selected seat height | 760 mm above floor; adopted project planning basis |
| Selected overall envelope | 480 W × 500 D × 1020 H mm; project dimensions, confirmed on the fabrication drawing |
| Selected base & footrest | 400 × 400 mm plate footprint; 300 mm footrest level; adopted project basis |
| Seat & back | Black fabric upholstery with rebound-foam padding; actual textile and foam specification itemized |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The project planning configuration sets the seat at 760 mm above the finished floor and the overall height at 1020 mm. These design dimensions are confirmed on the fabrication drawing. With the selected 1100 mm counter datum, the vertical seat-to-counter difference is 340 mm; the actual apron and user clearances still govern the final fit.
The chosen overall envelope is 480 mm wide by 500 mm deep, with a 400 × 400 mm square base footprint. Use the complete chair envelope when setting adjacent positions. The plate is smaller than the seat envelope and cannot by itself determine usable seating pitch or the circulation behind occupied stools.
The selected layout sets the footrest at 300 mm above the floor. The drawing identifies that level as its own dimension, below the 760 mm seat. Floor protection, level contact and the actual base assembly are specified for the receiving space.
The stool package identifies the upholstered seat and back, fixed post, square base and forward footrest. The selected project envelope is carried with the complete assembly. A swivel or height-adjustable chair would require a different mechanism and is outside this configuration.
The cover reference, actual padding specification and brushed metal finish define the material package. Any requested fire, cleaning or abrasion requirement is attached to the specified upholstery. A material name does not supply a test certificate or a whole-stool performance rating.
List stool quantities with the counter dimensions and finish reference. Repeated locations can share one configuration while retaining separate packing marks. Final positions account for the seat envelope, square plate, footrest and occupied circulation area.
The agreed delivery plan records actual packed dimensions, protective packaging and receiving arrangements. Any component assembly and floor-contact protection are each identified. Counters and other bar furniture are other items. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
No. This is the fixed-height, non-swivel configuration with a single post and square plate base. The seat level is specified for the order. A gas-lift or rotating mechanism is not included.
The seat and back use black fabric upholstery with rebound-foam padding. The material schedule identifies the actual textile and padding specification for the order.
The selected project basis uses a 760 mm seat height and a 1020 mm overall height. Those are planning dimensions, confirmed on the final drawing. The 1100 mm counter datum in the drawing gives a 340 mm seat-to-counter difference; the actual counter apron and final chair drawing determine the fit.
The selected layout uses a 400 × 400 mm square plate within a 480 mm wide by 500 mm deep chair envelope. These are chosen project dimensions. Adjacent stool spacing also needs room for the upholstered seat, feet and occupied circulation as well as the base plate.
The listed material is 201 stainless steel with a brushed or hairline finish. No metal thickness, corrosion test, load rating or anchoring detail is assigned from that description. The actual assembly and required performance evidence are specified for the order.
Provide stool quantity, counter height and apron details, selected seat height, available bar length and the black upholstery reference. Include the floor finish and receiving access. Our quote identifies the chair assembly, material package, packing and any agreed assembly work.
Cream Adjustable Swivel Stool with a Stainless Steel Base
Brown Upholstered Dining Chair with a Black Metal Frame
Wood Dining Armchair with a Cutout Back & Leather Seat
Wood Dining Chair with a Round Upholstered Seat & Back