Paired Marble Coffee Tables with Curved Plate Supports
The larger top has broad rounded corners and a compact outline. It sits above wide metal plates that curve around parts of the perimeter, leaving open spaces between the supports. The selected top material is matte Lauren Black Gold natural marble.
The second table has a longer, narrower outline with rounded ends. It stands as its own body beside the larger table, with its own base. Each top has its own material line and approved stone reference so the final pair can be coordinated deliberately.
Wide bent plates form the support arrangement beneath each top. Their open spacing is a defining part of the body, unlike a single central cylinder or an enclosed storage box. Stainless steel is the listed support material; the black or champagne color is a finish choice.
The selected stone specification is natural marble identified as matte Lauren Black Gold. Dark grounds and lighter veins vary across slabs. Schedule each tabletop individually, with its actual stone reference, orientation and finished appearance recorded before fabrication.
Roman Black metallic paint gives the curved plates a dark appearance beneath the tops. This is a finish on the stainless steel support assembly.
Champagne Gold metallic paint provides a warmer support finish on the same bodies, painted over the stainless steel with no gold or brass content. Choose the metal finish alongside the stone references so the two tables read as one coordinated furniture package.
| Configuration | Two separate low coffee tables: broad rounded-square and elongated companion |
|---|---|
| Support finish | Two coffee-table bodies with stainless steel supports in Roman Black metallic paint; marble tops scheduled individually, with matte Lauren Black Gold as the selected stone specification. |
| Tabletop specification | Natural marble; matte Lauren Black Gold selected; each top has its own accepted stone reference |
| Selected large table | 1200 W × 1090 D × 270 H mm; chosen project design basis |
| Selected companion table | 1050 W × 620 D × 270 H mm; chosen project design basis, confirmed on the drawing |
| Support construction | Curved stainless steel plates with open spaces between supports; thickness and connections specified for fabrication |
| Placement | Adjacent same-height arrangement. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The selected larger table is 1200 mm wide by 1090 mm deep; the companion is 1050 mm wide by 620 mm deep. Both use a 270 mm project height. The drawing shows each body on its own.
The two selected tables stand at the same project height. Place them beside one another with a deliberate gap; an overlapping or sliding-under arrangement is not part of this design. Coordinate their rounded outlines with the sofa edge and the walking route through the room.
The tops and support assemblies require the actual component weights and packing dimensions for receiving. We confirm the floor-contact detail with the base assembly.
The paired package identifies both tabletop outlines and their corresponding support assemblies. Keep the broad top and elongated companion as separate order lines within the set. The quote states whether both tables or an individual body is being purchased.
The actual stone references, slab selection, top sizes and edge treatment define the stone package. Each top is reviewed on its own dimensions and stone pattern. Stone thickness and any supporting detail are specified for fabrication.
Roman Black or Champagne Gold metallic paint is selected for the stainless steel plates. The actual plate arrangement, finish reference and top connection belong to the fabrication package.
Protective crates or other packing, transportation and receiving are listed against the actual supplied components. Destination access, unloading and assembly requirements are separate from the table material price. A sofa, rug and other room pieces remain outside the table set. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The selected layout places the tables beside each other at a 270 mm project height. No sliding-under or overlapping function is included. Their actual positions and the gap between them are set in the furniture plan.
The two bodies are individual items in the quotation. Specify the broad rounded-square table, the elongated companion or the complete pair so the top, supports and packing count match the request.
The selected specification is matte Lauren Black Gold natural marble. Each tabletop has its own accepted stone reference and pattern orientation. A different companion stone requires its own material selection.
No. The listed structure is stainless steel, with Champagne Gold metallic paint as one finish choice. Roman Black metallic paint is the other listed finish. The material and finish remain separate specifications.
The project basis is 1200 × 1090 × 270 mm for the broad table and 1050 × 620 × 270 mm for the elongated companion. These design dimensions are confirmed on the fabrication drawings, which set the final supplied geometry.
The selected bodies, actual stone references, top size, edge work, support finish and quantity define the furniture order. Add the destination and receiving route so packing, transport and assembly can each be listed.
Marble Console Table with a Gold Spiral Base
Organic Marble Nesting Coffee Tables
Custom Rectangular Coffee Table with an Open Lower Shelf
Violet Marble Coffee Table with Mirrored Sides & Open Storage