Four-leg open-shelf coffee table
The selected table has a rectangular 1100 × 550 mm footprint and 400 mm finished overall height. Both the top and lower shelf use 18 mm finished walnut-veneered plywood. The lower shelf is an open, accessible storage level, with no drawer, enclosed cabinet or lifting compartment.
A 25 × 25 × 2 mm square steel tube frame has four corner legs and perimeter support rails directly beneath both panels. One central crossrail supports the lower shelf between its front and rear rails. It remains a horizontal shelf support, with no extra center leg reaching the floor.
The selected lower shelf top is 150 mm above the floor. Its perimeter and corner reliefs are fitted to the accepted finished frame, retaining the required panel bearing on the support rails. Shelf size and relief clearances follow the actual assembly.
The top and lower shelf share a walnut veneer selection with a selected clear finish. Grain direction, face range, edge treatment and sheen are accepted together. The order records whether the two levels use a deliberately matched appearance or an agreed natural face range.
The selected steel frame is finished in black powder coat. Both rail levels, four legs and the lower crossrail carry the same accepted coating reference. Exposed welds, corner finishing and panel attachments form part of the fabrication detail, with steel grade and load capacity confirmed for the order.
The lower shelf exposes its front, back and side edges, including the reliefs around the corner legs. Those edges receive the agreed finish and fit allowance. Pads at the four floor contacts are selected for the floor finish, with the completed table detailed to its 400 mm overall height.
| Configuration | Selected fixed rectangular coffee table; two horizontal panels, four corner legs, open front/back shelf access; dry interior use. |
|---|---|
| Material combination | Selected 18 mm walnut-veneered plywood top and lower shelf on a 25 × 25 × 2 mm powder-coated steel four-leg frame; perimeter rails at both levels and one lower-shelf crossrail. |
| Selected outside sizes | 1100 L × 550 D × 400 H mm; 18 mm finished top and shelf. Lower shelf top 150 mm above floor; shelf perimeter/reliefs fit the actual frame. |
| Selected steel frame | 25 × 25 × 2 mm square tube, black powder coat; perimeter support rails at both levels plus one central lower-shelf crossrail; no center floor leg. |
| Nominal shelf opening | Inner leg-face gap 1050 mm along front/back. Rail underside 357 mm = 400 - 18 - 25; opening above shelf 207 mm = 357 - 150. Final fit by assembly detail. |
| Finish / use | Walnut veneer, edge finish, coating and pads by sample/detail. Connections, stability and service loading resolved for actual assembly. |
| Supply | Finished tables by selected design and quantity; samples, floor pads, assembly, packing, freight and placement individually scheduled. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
With the selected 25 mm corner legs at the outside of the 1100 mm frame, the nominal gap between inner leg faces is 1050 mm. Front and back remain open for storage access. Shelf perimeter, corner reliefs and the actual clear storage plan are confirmed on the final assembly drawing.
The 18 mm top underside is 382 mm above the floor. A 25 mm-deep upper rail reaches down to 357 mm, leaving 207 mm above the 150 mm shelf-top level at the front and back openings.
The room layout uses the full 1100 × 550 mm footprint and actual seating reach. Open-shelf access, door travel and circulation remain available around the table. Finished weight, supported handling points and floor pads are identified for delivery; the lower shelf is not an assumed lifting handle.
The quotation includes the top and lower shelf as two 18 mm finished panel parts, with accepted walnut veneer and clear finish. Lower-shelf reliefs, exposed edges and any agreed face matching belong to the panel work. A material or size revision receives its own updated schedule.
The frame line includes four corner legs, both perimeter support levels, one lower-shelf crossrail and the accepted connections. Weld finishing, powder coat and panel attachment are listed with that frame.
The order identifies veneer and coating samples, pads and any included assembly work. Books, trays, seating and decorative accessories are separate room items. A specific object that must fit the shelf is checked against the accepted opening and shelf dimensions before the design is finalized.
Packing protects the walnut faces, panel corners and coated steel. Actual packed dimensions and shipment weight are recorded for the destination freight plan. Unloading and final placement have assigned responsibilities; MOQ and production timing are confirmed for the selected order. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
Yes. The selected frame has four corner legs and perimeter rails, with no front or back enclosure panel. The nominal gap between inner leg faces is 1050 mm. The final shelf perimeter and reliefs follow the actual finished frame and panel-bearing detail.
The selected shelf top is 150 mm above the floor and the upper rail underside is 357 mm, leaving 207 mm nominal access height beneath the front or back rail. The top underside is 382 mm, giving 232 mm inside; that larger value is not the access throat under the rail.
No. The selected top and shelf are finished 18 mm walnut-veneered plywood panels. Natural veneer supplies the wood face over the panel core. Veneer range, grain direction and exposed edges are accepted together.
It is a horizontal support between the lower front and rear rails, directly beneath the shelf. It is not a fifth leg or a vertical divider. Its connection and panel-bearing detail belong to the accepted frame assembly, with no numeric shelf load inferred.
No. It is a fixed top and an open lower shelf on a four-corner frame. A moving mechanism, enclosed compartment or extension would change the construction and need its own specification.
The intended objects, load positions and assembly connections are resolved for the actual table. The order also records finished and packed weight, handling points, pads, freight and placement responsibilities for the destination.
Marble Console Table with a Tapered Travertine-Clad Pedestal
Paired Marble Coffee Tables with Curved Plate Supports
Travertine Side Table with an Offset Three-Sphere Base
Oak-Veneer Console with a Perforated Top