Open coffee niche with cup storage
The work niche remains open during use. It occupies the space between the 900 mm-high counter and upper cupboards beginning 1700 mm above floor, giving an 800 mm nominal vertical opening. There are no closing appliance-garage doors or pocket mechanisms around the coffee position.
Three 600 mm base modules form the 1800 mm cabinet run. The left module has three drawers; the center and right provide hinged-door storage. Cups, coffee supplies and serving items can be allocated without placing a fixed appliance inside those lower cupboards.
The upper cupboard bank is 350 mm deep and 500 mm high. It stores cups above the work niche while keeping the lower counter 600 mm deep. The selected cases use 18 mm plywood with supported 6 mm backs; wooden drawers use 12 mm sides and backs with supported 6 mm bottoms.
Matte warm-white lacquer is allocated to the base fronts, upper cupboard doors and scheduled exposed ends. The left drawer bank and adjoining doors use the same color reference. Plinth returns and room-fit fillers are counted with that finish.
Natural oak veneer lines the niche and adjoining exposed panels, with grain direction and finished edges scheduled apart from the lacquer fronts. The niche is open to the room, so the machine is always ready to use.
The arrangement uses a 20 mm pale sintered-stone worktop, priced as its own line, with support and wall junction following the cabinet layout.
| Cabinet arrangement | Three 600 mm base modules; left three-drawer bank with center/right hinged storage and upper cup cupboards. |
|---|---|
| Coffee cabinet finish | Warm-white lacquer fronts and oak-veneer open niche; 20 mm pale sintered-stone worktop itemized as an extra |
| Nominal overall size | 1800 W ×600 base D ×2200 H mm before additional site fillers. Worktop height:900 mm. |
| Selected plywood build | 18 mm cases/shelves; 12 mm wooden drawer sides/backs; supported 6 mm backs/bottoms. Ordinary hinges and full-extension drawer runners. |
| Open niche and upper bank | 800 mm nominal open height from 900 to 1700 mm; upper cupboards 500 mm high ×350 mm deep. No closing niche doors. |
| Selected worktop | 20 mm pale sintered-stone top, itemized with its support, edge and wall-junction schedule. |
| Appliances and services | Freestanding coffee machine and grinder chosen as extras. Their heat, steam, fill access and electrical requirements set the equipment fit; plumbing and power are site work. |
| Minimum order | Made to your project quantities. Small item counts are accepted when they ship with the rest of your project list; the quotation confirms the quantity for each item. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The 800 mm nominal niche height is an enclosure dimension. The selected freestanding machine needs room for any top-fill tank, bean hopper, lid movement and removal route. Its actual instructions determine the operating position under the cupboards.
Steam outlets and hot surfaces affect the space beside and above a coffee machine, so the appliance instructions set those clearances and any surface protection. Outlet positions and electrical work are planned with your electrician; sockets, circuits and plumbed water are site work.
The 350 mm upper depth keeps the counter front free below it. Cupboard doors, the three base drawers and the appliance water tank each need their own opening path, and the 1800 mm run keeps counter space for cups and preparation beside the equipment.
The selected package has three 600 mm base modules, a three-drawer bank, hinged storage, upper cup cupboards and the open niche panels. A change to drawer count or cupboard divisions changes the fitting and panel quantities.
The finishing schedule separates warm-white fronts from oak-veneer niche surfaces. Exposed ends, trim and plinth returns are itemized. Another veneer, color or fully veneered front package is a material change.
The 20 mm sintered-stone top is its own line, and the coffee machine, grinder, removable trays and cup organizers are chosen as extras. A plumbed coffee appliance or built-in refrigeration would be added to the design.
Packing and freight to your destination are quoted for the cabinet format. Wall preparation, restraint, top fitting and final installation are agreed responsibilities, and power supplies, electrical work and any optional water connection are site work.
No. The selected work niche stays permanently open. There is no pocket door, roller shutter or appliance-garage door around the coffee equipment.
Not every machine will. The actual appliance needs its operating clearance, lid or tank access and removal route, as well as physical body height. Its instructions determine whether the selected position under the upper cupboards is suitable.
They are separate appliance selections. The cabinet quote covers the furniture package and top, and the machine, grinder, trays and any appliance connection work are itemized on their own.
This configuration is designed for a freestanding machine with its own water tank. A plumbed appliance can be planned in with its model, service route and installation.
The upper bank gives 350 mm-deep closed cup storage. Below the counter are three drawers on the left and hinged storage in the other two 600 mm modules. Interior dividers or cup racks are optional fittings.
The 20 mm sintered-stone top is itemized on its own. Electrical outlets, circuits and local connections are site work, planned around the coffee appliance before final cabinet fitting.
Built-In Wet Bar Cabinets with a Sink Bay and Separate Dry Storage
Smoked Glass Bar Cabinet with Wood Drawer Storage
Built-In Buffet Cabinets for Dining Room Storage
Custom Home Bar Cabinets