Brushed Stainless Steel
The brushed finish gives the side tubes and rails a directional metallic texture, and the mount covers share the same finish reference.
Hardwired Ladder Towel Warmer with Wall Timer
Hardwired Ladder Towel Warmer with Wall Timer
- Body material
- 304 stainless steel
- Ladder finish
- Brushed 304 stainless steel
- Horizontal rails
- Six Ø25 mm rails; 132 mm center pitch
Six Heated Towel Rails and Concealed Cable Entry
Six Round Horizontal Rails
Six 25 mm-diameter rails span between 32 mm-diameter side tubes. Their centers follow a 132 mm pitch, with the first and last centers 70 mm from the body ends.
304 Stainless Ladder Body
The configured body is 500 mm wide and 800 mm high in 304 stainless steel. Four standoffs hold the assembly at a 100 mm overall wall projection.
Hardwired Heater and Wall Timer
The electrical package is specified at 120 W heater input and 230 V, 50 Hz. Concealed cable entry sits at the lower-right mount, paired with a compatible wall timer on its own schedule line.
Stainless Ladder Towel Warmer Finishes
Polished Stainless Steel
Polished stainless steel retains the six-rail geometry with a reflective surface. The complete body and standoff covers are reviewed together for appearance.
Matte Black
The black-coated finish uses the same stainless body and mounting pattern. Color and sheen are coordinated with the wall timer plate and nearby bath fittings.
Towel Warmer Configuration Dimensions
| Body material | 304 stainless steel |
|---|---|
| Ladder finish | Brushed 304 stainless steel |
| Overall body | 500 W × 800 H mm |
| Horizontal rails | Six Ø25 mm rails; 132 mm center pitch |
| Side tubes and projection | Ø32 mm side tubes; 100 mm overall wall projection |
| Mount pattern | Four standoffs; 468 W × 660 H mm center rectangle |
| Heater and control package | 120 W input · 230 V/50 Hz · concealed lower-right entry · compatible wall timer |
| Supply unit | One heated ladder, four standoffs, mounting hardware and compatible wall timer |
Open product drawing ↗
Wall Mounting, Towel Access and Timer Position
Locate the Four Wall Connections
The mount-center rectangle is 468 mm wide and 660 mm high. The wall detail identifies support, fasteners and the cable-entry point against the finished wall surface.
Allow Towel and Hand Access
The 100 mm projection and six-rail arrangement are placed around towel access, nearby doors and other bathroom fittings. The room elevation sets the installed height and working space.
Schedule the Electrical Assembly
The heater, concealed entry, wall timer and destination connection are listed as one electrical package, and the installation plan assigns cable routing, control position and the product documentation.
Heated Towel Rail Supply Schedule
Ladder Body and Finish
List the 500 × 800 mm six-rail body in brushed, polished or black finish. Keep the tube diameters and matching standoffs on the fitting reference.
Heater and Timer Components
Quote the 120 W, 230 V/50 Hz heater package with its compatible timer and entry arrangement, with control type and any extra timer accessories as their own lines.
Wall Fixings and Site Connection
Schedule the four mounts, fixings matched to the substrate and the electrical connection, and assign site work and installation from the wall and wiring detail.
Fitting Labels and Packing
Protect the rails and finish, and keep mount covers and controls with the fitting label. State unit quantities, destination and delivery requirements.
Towel Warmer Order Configuration
- Body
- Size, rails, material, finish and quantity
- Electrical package
- Heater input, destination supply, entry and timer
- Wall interface
- Mount centers, substrate, cable route and installation
- Delivery
- Fitting labels, protection and destination
Hardwired Ladder Towel Warmer Questions
How many rails are in the ladder?
The body has six horizontal rails, each 25 mm in diameter, between 32 mm side tubes. Rail centers follow a 132 mm pitch.
What are the overall wall dimensions?
The ladder body is 500 mm wide and 800 mm high, with a 100 mm overall projection from the finished wall. The four mount centers form a 468 × 660 mm rectangle.
Which surface finishes can be ordered?
Brushed stainless steel, polished stainless steel and matte black are the three body finishes. Each uses the same 304 stainless ladder configuration.
Where does the cable enter?
The hardwired cable entry is concealed at the lower-right mount, and its position is shown on the wall and wiring elevation together with the timer location.
What electrical package is specified?
The configuration pairs 120 W heater input with 230 V, 50 Hz supply and a compatible wall timer. Destination wiring, control position and product documentation are coordinated on the electrical schedule.
What information is needed for the package order?
Include finish, quantity, installed height, wall construction and destination supply. Add the timer/control requirement, cable route, mounting detail and installation responsibility.
More Bath Hardware & Accessories
Wall-Mounted Bathroom Hardware Package with Towel Bar
KSH-SG-005B Wall-Mounted Handheld Bidet Spray
Wall-Mounted Stainless Steel Bathroom Grab Bar Pair
Wall-Mounted Stainless Towel Shelf with a Hanging RailGuides for specifying bath hardware & accessories
Request a Towel Warmer Package
Hardwired Ladder Towel Warmer with Wall TimerBrushed steel