Two 1200 mm-Wide Slabs
The main pair combines two 1200 × 2400 mm slab faces. A 3 mm center joint makes the complete pair 2403 mm wide; the marble faces themselves total 5.76 m².
Bookmatched Marble Wall Slab Pair Sets
Bookmatched Marble Wall Slab Pair Sets
- Stone and face finish
- Natural white/gray-veined marble; honed exposed faces
- Two-slab pair format
- 2 × 1200 W × 2400 H × 20 T mm slabs ·2403 mm pair width
- Center seam
- 3 mm joint between mirror-oriented left/right faces
Natural Marble Faces, Bookmatched Veins and a Center Seam
Two Mirror-Oriented Natural Faces
The wall package pairs two adjacent marble faces in a left/right bookmatch. Gray vein contours mirror across the center seam, with each numbered face retained through cutting, finishing and packing.
20 mm Honed Marble Slabs
Each slab is 20 mm thick with a honed face. Straight center-seam edges and lightly eased outer arrises form the perimeter, and the material reference records the natural color and mineral range.
One Numbered Wall Composition
The pair is treated as a single wall composition. Its elevation identifies left and right slabs, the centerline, top and bottom datums, exposed edges and the fixing interfaces needed by the supporting wall.
Three Bookmatched Wall-Pair Widths
Two 900 mm-Wide Slabs
The narrower composition uses two 900 × 2400 mm slabs with the same 20 mm section. Its 1803 mm joint-inclusive width contains 4.32 m² of marble face.
Two 600 mm-Wide Slabs
The compact pair keeps the 2400 mm height and mirrored layout at 1203 mm overall width, with two 600 mm faces giving 2.88 m² of marble and the 3 mm seam shown on the elevation.
Marble Slab Pair Dimensions and Face Areas
| Stone and face finish | Natural white/gray-veined marble; honed exposed faces |
|---|---|
| Two-slab pair format | 2 × 1200 W × 2400 H × 20 T mm slabs ·2403 mm pair width |
| Slab thickness and height | 20 mm thick;2400 mm high per slab |
| Center seam | 3 mm joint between mirror-oriented left/right faces |
| Combined pair widths | 2403 /1803 /1203 mm including the center joint |
| Marble face areas | 5.76 /4.32 /2.88 m² per pair, excluding joints and cuts |
| Edges and layout | Straight center-seam edges, eased exposed arrises and numbered paired cut map |
| Supply unit | One identified left/right bookmatched two-slab wall pair with scheduled finished edges |
Open product drawing ↗
Face Pairing, Centerlines and Wall Supports
Set the Center Seam First
The room elevation locates the bookmatch axis in relation to furniture, wall openings and adjoining finishes. The 3 mm center joint, outer perimeter joints and cut boundaries stay on the same setting-out reference.
Keep Faces and Cut Maps Together
Left/right identification, vein direction and finished edges remain tied to the paired faces. Openings and edge cuts are positioned on the two-slab cut map so the resulting wall composition stays coordinated.
Coordinate Retention and the Supporting Wall
The mounting schedule relates slab thickness, rear fixing zones, wall rails or supports and the actual wall substrate. Handling, installation sequence and accessible joint details are established for the complete wall-facing assembly.
Bookmatched Marble Wall Pair Supply Schedule
Slab Pair Size and Quantity
Quote the 1200,900 or 600 mm slab width as one matched two-piece unit. Keep pair quantities, room/elevation numbers, gross face area and any cut openings together.
Face Pairing and Honed Finish
Keep the chosen natural faces, left and right bookmatch and honed finish reference, and record center-seam edge quality, lightly eased outer arrises and perimeter treatments.
Cutting and Mounting Interfaces
Itemize openings, special edge work and the fixing and support package by the numbered elevation, with wall preparation, handling equipment and installation named on the same assembly schedule.
Paired Crating and Delivery Order
Pack the two faces with protected surfaces and edges, clear left/right labels and their shared elevation reference. Crate order, receiving route, access dimensions and destination follow the installation sequence.
Bookmatched Marble Wall Pair Order Configuration
- Pairs
- Slab width, pair quantity, wall elevation and location
- Natural faces
- Left/right face references, bookmatch axis and honed finish
- Fabrication
- Center seam, exposed arrises, perimeter cuts, openings and supports
- Delivery
- Paired labels, surface protection, crate sequence and destination
Bookmatched Marble Wall Slab Questions
What is supplied as a bookmatched pair?
One unit contains two mirror-oriented natural marble slab faces identified left and right. The paired face references and centerline remain together on the cutting and wall-elevation schedule.
Which pair sizes can be chosen?
Each slab is 2400 mm high and 20 mm thick. Choose 1200,900 or 600 mm slab widths, giving 2403,1803 or 1203 mm overall pair width with the 3 mm center joint.
How much marble face is in each pair?
The 1200 mm pair gives 5.76 m² of marble face, the 900 mm pair 4.32 m² and the 600 mm pair 2.88 m², with joint space, perimeter cuts and openings added on the takeoff.
How are the surfaces and edges finished?
The faces are honed. The center-seam edges are straight, and the outer arrises get the scheduled light easing and any extra perimeter treatment.
How are openings and mounting positions coordinated?
The paired cut map places openings, exposed edges and rear fixing zones against the bookmatch axis, and the wall assembly coordinates stone retention, supports and substrate connections with that same elevation.
What information is needed for the pair quotation?
Send slab-pair width, quantity, wall dimensions and location, and keep the paired face and finish reference, plus openings, perimeter joints, edge work, support and installation needs, packing and destination.
More Marble Slabs
Dark Emperador Marble Slabs
Four-Piece Marble Bathtub Deck Surround Sets
Calacatta Gold Marble Slabs
Carrara White Marble for Project-Cut Interior SurfacesGuides for specifying marble slabs
Request a Bookmatched Marble Wall Pair Quote
Bookmatched Marble Wall Slab Pair Sets1200 mm slabs