1700 × 750 mm Bath Opening
The main deck measures 2100 × 1150 mm outside. Two 2100 × 200 mm strips and two 200 × 746 mm end fillers make the 200 mm border around its 1700 × 750 mm central opening.
Four-Piece Marble Bathtub Deck Surround Sets
Four-Piece Marble Bathtub Deck Surround Sets
- Marble and face
- Natural white/gray marble; honed exposed surface
- Bath opening and outside size
- 2100 × 1150 mm outside ·1700 × 750 mm opening ·20 mm stone
- Border width
- 200 mm on all four sides
Four Honed Marble Pieces around the Bath Opening
20 mm Natural Marble Border
Honed white and gray natural marble forms a 200 mm-wide border around the rectangular bath opening. The 20 mm stone section carries finished exposed inner and outer edges and an accepted slab-face reference.
Two Long Strips and Two End Fillers
Full-length front and rear strips meet two shorter pieces fitted between them. The four-piece cut map keeps the bath opening, outer perimeter and natural vein direction on one numbered layout.
Four 2 mm Butt Joints
A 2 mm joint separates each end filler from the long strips at both ends. For the main deck, 200 +2 +746 +2 +200 mm gives the 1150 mm outside depth while retaining a 750 mm opening depth.
Three Bath-Deck Opening and Outside Dimensions
1500 × 700 mm Bath Opening
The compact set measures 1900 × 1100 mm outside. Its front/rear strips are 1900 mm long, and each end filler is 696 mm long between the four 2 mm butt joints.
1800 × 800 mm Bath Opening
The larger set measures 2200 × 1200 mm outside. Its two 2200 mm strips and 796 mm end fillers retain the same 200 mm border, 20 mm thickness and joint arrangement.
Marble Deck Pieces, Border Width and Joint Dimensions
| Marble and face | Natural white/gray marble; honed exposed surface |
|---|---|
| Opening and outside size | 2100 × 1150 mm outside ·1700 × 750 mm opening ·20 mm stone |
| Stone thickness | 20 mm |
| Border width | 200 mm on all four sides |
| Default front/rear pieces | Two 2100 L × 200 W × 20 T mm strips |
| Default end pieces | Two 200 W × 746 L × 20 T mm fillers |
| Joint layout | Four 2 mm butt joints; 200 +2 +746 +2 +200 =1150 mm |
| Supply unit | Four numbered marble pieces with cut map and edge schedule |
Open product drawing ↗
Bath Rim, Deck Support and Wall Junctions
Align the Stone Opening with the Bath Rim
The bath template establishes the rim bearing, opening corners and finished inner-edge geometry. The deck drawing places that template against the selected opening and the 200 mm stone border.
Carry Stone Bearings and Waterproofing Together
The supporting frame, stone bearing surfaces, setting system and waterproofing junctions follow the bath and room detail. The four stone joints and any wall junctions stay accessible on that assembly drawing.
Locate Faucets and Finished End Treatments
The room plan records wall positions, exposed edges, any faucet/accessory holes and service access. Stone face selection, vein direction and corner joints are retained by piece number before fabrication.
Marble Bath Deck Fabrication Schedule
Deck Format and Four-Piece Cut Map
List the selected opening/outside size and deck quantity by bathroom. The quote carries two long strips, two end fillers and the four-joint layout under one bath reference.
Marble Faces and Finished Edges
Schedule the 20 mm honed natural marble, accepted face range and exposed inner/outer edge lengths. Any additional holes or returned edges have their own fabrication references.
Bath and Support Interfaces
Identify the bath template, stone bearings, waterproofing junctions and setting materials, and assign supporting construction, service access and stone installation to the right trades.
Numbered Piece Protection and Delivery
Pack the four pieces with face and edge protection. Mark long strips and end fillers by bathroom and orientation, with crate contents, piece counts and destination on the delivery list.
Marble Bath Deck Order Configuration
- Set
- Opening/outside size, bathroom reference and quantity
- Stone
- Honed face, 20 mm thickness, vein layout and finished edges
- Interfaces
- Bath template, stone bearings, joints, waterproofing and accessory holes
- Delivery
- Four-piece labels, edge protection, crate counts and destination
Four-Piece Marble Bath Deck Questions
What comes in one marble deck set?
One set has two full-length front/rear strips and two shorter end fillers. The pieces are numbered to the deck plan, with their honed faces, finished exposed edges and four butt joints identified.
How wide is the border around the bath?
The border is 200 mm wide on all four sides. The 1700 × 750 mm main opening therefore sits within a 2100 × 1150 mm outside perimeter.
Why are the main end fillers 746 mm long?
Each filler fits between the long strips with a 2 mm joint at both ends. The 750 mm distance between the strip inner edges is made from 2 +746 +2 mm.
Which other deck sizes share this layout?
The 1500 × 700 mm opening uses a 1900 × 1100 mm outside deck and 696 mm end fillers. The 1800 × 800 mm opening uses 2200 × 1200 mm outside and 796 mm fillers.
How is the opening matched to the bath?
The actual bath-rim template establishes bearing, corner shape and finished inner-edge geometry. Those interfaces are placed on the four-piece deck drawing with the stone support and waterproofing junctions.
What belongs in the fabrication quotation?
Include the deck format, bath template, marble face reference, exposed-edge list and any accessory holes. The quote then lists the four cut pieces, joints, support interfaces, protected packing and delivery destination.
More Marble Slabs
Bookmatched Marble Wall Slab Pair Sets
Dark Emperador Marble Slabs
Calacatta Gold Marble Slabs
Carrara White Marble for Project-Cut Interior SurfacesGuides for specifying marble slabs
Request a Marble Bath Deck Set Quote
Four-Piece Marble Bathtub Deck Surround Sets1700 × 750 mm opening