900 × 600 mm Main Opening
The main surround measures 1100 mm wide and 800 mm high outside. Its rectangular opening and constant 100 mm band define the front elevation.
Boxed Steel Fireplace Surround Frames
Boxed Steel Fireplace Surround Frames
- Frame material
- 2 mm carbon-steel sheet; folded/welded; matte-black finish
- Clear opening and outside size
- 1100 W × 800 H mm outside ·900 × 600 mm clear opening ·80 mm depth
- Boxed return depth
- 80 mm behind the front face
Folded Steel Face Band with Boxed Returns
2 mm Folded and Welded Steel
The surround is formed from 2 mm carbon-steel sheet with a matte-black finish. Four joined sides create one rectangular frame around the appliance opening.
100 mm Flat Face Band
The front band is 100 mm wide along all four sides. The main 900 × 600 mm clear opening therefore sits within a 1100 × 800 mm outside frame.
80 mm Boxed Return and Rear Flanges
The boxed section extends 80 mm behind the face, and its 20 mm rear fixing flange keeps the frame connections behind the face band, with the brackets shown on the wall detail.
Three Clear Openings with a 100 mm Surround Band
1100 × 650 mm Opening
The middle format measures 1300 × 850 mm outside. It retains the 2 mm sheet, 100 mm face band and 80 mm boxed depth around the wider opening.
1300 × 700 mm Opening
The large format increases the outside frame to 1500 × 900 mm. The same band and return section continue around all four sides, with fixings matched to the larger frame.
Steel Surround Frame and Return Dimensions
| Frame material | 2 mm carbon-steel sheet; folded/welded; matte-black finish |
|---|---|
| Opening and outside size | 1100 W × 800 H mm outside ·900 × 600 mm clear opening ·80 mm depth |
| Front face band | 100 mm on all four sides |
| Boxed return depth | 80 mm behind the front face |
| Rear fixing flange | 20 mm design width |
| Main clear opening | 900 W × 600 H mm |
| Assembly interface | Rear brackets, wall anchors and appliance/finish requirements on fireplace detail |
| Supply unit | One rectangular surround frame with returned edges and fixing schedule |
Open product drawing ↗
Firebox Fit, Wall Junctions and Rear Fixings
Match the Opening to the Fireplace Documents
The appliance and wall installation documents establish the opening, clearance and heat-interface requirements. The selected frame elevation is coordinated with the firebox face and adjoining finish.
Locate Rear Fixings and Wall Bearings
The wall detail positions the rear flanges, brackets, anchors and supporting construction, with frame depth, alignment and connection access recorded alongside the face-band dimensions.
Carry Corner and Finish References Together
The fabrication drawing marks corner joints, weld finishing, the matte-black surface and exposed returns, and any hearth, wall lining or adjacent trim junction has its own interface reference.
Boxed Steel Fireplace Surround Supply Schedule
Opening Size and Frame Quantities
List the 900 × 600, 1100 × 650 or 1300 × 700 mm opening by fireplace reference. Pair each with its 1100 × 800, 1300 × 850 or 1500 × 900 mm outside frame.
Folded Sheet and Surface Finish
Quote 2 mm steel, 100 mm face band, 80 mm boxed depth and the 20 mm rear fixing-flange design. The accepted reference records corners, weld finish and matte-black appearance.
Wall and Appliance Interfaces
Schedule rear brackets, anchors, wall bearing and connection access against the actual appliance detail. The project package carries heat/clearance and finish-suitability requirements for that location.
Frame Protection and Delivery
Protect the matte face, opening edges and boxed corners. Mark frames and fixing components by fireplace, with package dimensions, unit counts and receiving destination.
Steel Fireplace Frame Order Configuration
- Frame
- Clear opening, outside size, fireplace reference and unit quantity
- Fabrication
- 2 mm sheet, 100 face band, 80 return, 20 rear flange and corner finish
- Interfaces
- Appliance documents, wall construction, clearances, rear brackets and anchors
- Delivery
- Face/corner protection, component labels, package sizes and destination
Steel Fireplace Surround Frame Questions
How are the outside dimensions calculated?
The 100 mm band adds 200 mm to both opening dimensions. The 900 × 600 mm main opening therefore gives a 1100 × 800 mm outside frame.
Which opening sizes share the same section?
The three openings are 900 × 600, 1100 × 650 and 1300 × 700 mm. All use a 100 mm face band, 80 mm boxed depth and 2 mm steel sheet specification.
How is the frame formed?
Four folded and welded steel sides make one rectangular surround, with the face band and boxed returns finished to the same matte-black reference.
Where are the frame fixings located?
Rear 20 mm flanges and scheduled brackets connect the surround to the supporting wall. The detail identifies anchors, alignment and access behind the face.
How is the surround matched to the firebox?
The actual appliance and wall documents establish the opening, clearance, heat-interface and finish requirements. The frame drawing places its opening, depth and fixing positions against that coordinated detail.
What forms one supply unit?
One unit is the rectangular steel surround with folded returns and its fixing schedule, and the order records brackets and anchors, fireplace labels, surface protection, packing dimensions and destination.
More Fireplace Surrounds
Precast Concrete Fireplace Surround with a Stepped Mantel
Honed Limestone Fireplace Surround with Plain Mantel
Carved Marble Fireplace Surround with a Raised Hearth
Travertine Fireplace Surround with Honed Stone FacesRequest a Steel Fireplace Surround Quote
Boxed Steel Fireplace Surround Frames900 × 600 mm opening