Honed travertine surround
Travertine gives this straight surround a quiet banded surface, softer than the branching veins of most marbles. The stone is cut into the scheduled header, side pieces and any hearth or returns, with its warm mineral variation and small natural pores part of the material.
Travertine naturally contains voids. A filled face has the exposed openings filled before finishing, while an unfilled face keeps more of that texture; filling evens the surface without making the stone uniform. The order records the face treatment and filler reference with the stone.
A freshly cut return or hearth edge can expose a different pore pattern from the finished front. Those edges need their own fill and finish instructions. The piece schedule also identifies where the header meets the sides and where any hearth sits below them.
Filled and honed travertine combines a low-sheen surface with filled face openings, a practical choice for a quieter, more even touch across broad surround faces. The fill color is chosen with the stone, since light patches can show against darker bands, and the sample sets pore treatment and sheen.
Unfilled travertine keeps more open texture on the face, which changes both its look and how dust comes out of the recesses. Larger openings matter most at narrow pieces, corners and exposed edges, so the surface is chosen against the actual piece layout.
Band direction is scheduled across the header and side pieces. Adjacent faces can be paired for a deliberate transition without promising an exact repeat in natural stone. Exposed returns and hearth edges use the agreed finish and fill treatment as well. Polished travertine is a separate finish request where the selected material and application support it.
| Stone configuration | Cut-to-size natural travertine surround with a straight header and side pieces; matching hearth and inner returns included where scheduled. |
|---|---|
| Face treatment | Natural travertine with face voids filled and a honed finish; stone and filler references selected for the order |
| Overall and opening size | Finished overall width × height and clear opening width × height in mm, apart from the firebox viewing area. |
| Return and piece depth | Stone thickness, inner return depth and any built-up edge dimensions in mm; component pieces and joints identified on the drawing. |
| Pores and exposed edges | Filled or unfilled face, filler reference, honed or other finish, with cut-edge and return treatment specified. |
| Stone layout and hearth | Band direction and piece allocation; any hearth width × depth × height, front projection, joints and exposed edges in mm. |
| Fireplace interface | Firebox model, required hearth and lining construction, ventilation, fixing and clearances established for the project; decorative travertine is not the combustion lining. |
| Minimum order | Made to your project quantities. Small item counts are accepted when they ship with the rest of your project list; the quotation confirms the quantity for each item. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open travertine surround schedule ↗
The surround drawing starts from the appliance face and the finished wall position, then shows outside stone width and height and the clear opening as two sets of dimensions. Inner returns, slips or a hearth change how the opening relates to the room, and are measured as stonework details.
The selected filler, stone fixing and adjacent materials must suit the actual exposure. Cementitious and resinous fillers are different material systems; neither is assigned an automatic heat limit here. The fireplace instructions establish the heat zone, lining, ventilation and surrounding clearances. The decorative travertine frame is specified outside that separate appliance design.
A low hearth meets the floor differently from a raised platform, so its support, projection and finished edge are recorded before cutting. Open pores and filled areas affect cleaning near the floor and inner returns, and the care schedule follows the finish and exposure, using stone-safe products and gentle cleaning.
The actual stone selection, piece sizes and band direction determine how much usable material the surround requires. A broad header with a continuous visual direction can use stone differently from several narrow facing pieces. Hearths and deep returns add their own cut areas and handling needs.
Filled and unfilled faces have different finishing work. Our quote identifies the face treatment, filler reference and exposed edges that also need attention. Honing, polishing, shaped profiles and a built-up edge are separate fabrication choices.
The header, sides, hearth and inner returns are counted as stone pieces. A firebox, burner, flue, inner lining and heat-zone components are separate items when required. Our quote identifies which supports and fixing materials are supplied and which belong to the local installation package.
Corners, narrow sections and finished edges are protected in handling, and piece labels tie the stone package to its layout for a clear receiving check. Freight and unloading depend on the destination and largest piece, and wall preparation, stone fixing, fireplace installation and commissioning are site work. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
We supply natural travertine cut into the surround pieces, with mineral bands, pores and tonal variation that belong to the stone itself. Porcelain or printed travertine-look panels are different materials with their own specification.
Filled travertine has its face openings filled for a more even surface, while unfilled stone keeps more open texture, which also affects exposed edges and cleaning. The sample and piece layout set the look, and filler and installation materials are chosen for the fireplace exposure.
No. Filling treats accessible surface voids. Cavities within the stone can remain, and a later cut may expose them at an edge or return. The fabrication schedule therefore identifies how those newly exposed areas will be finished instead of assuming the front-face treatment covers every cut.
No. Band direction and adjacent pieces can be planned from the selected material. The cutting layout shows the chosen direction, piece divisions and any hearth allocation.
This is the decorative surround and hearth stonework that sits outside the firebox. The appliance system has its own heat-resistant inner construction, ventilation and clearances, and the travertine, filler and fixings are chosen for their position around it.
The quote needs overall frame and opening dimensions, return depth, appliance details, stone direction, filled or unfilled treatment and preferred finish. Include any hearth dimensions, piece quantities and delivery destination. The order separates decorative stonework from the fireplace equipment and local installation.
Carved Marble Fireplace Surround with a Raised Hearth
Precast Concrete Fireplace Surround with a Stepped Mantel
Honed Limestone Fireplace Surround with Plain Mantel
Boxed Steel Fireplace Surround Frames