Perforated-groove panel profile
Broad, flat wood-look strips run along GP-KJ210XY. Between them, narrow recessed channels expose a lighter-toned surface with repeating small round holes. The combination produces a striped face with a different visual rhythm from a rounded fluted panel. Hollow sections show at the cut end of the profile.
The listed material is bamboo fiber, finished with a laminated decorative surface. Hot and cold pressing form part of the stated process. The 12 mm measurement is the overall profile thickness; groove depth, hole size and individual wall thickness are separate details.
Side slotting forms part of the GP-KJ210XY specification. The long-edge detail governs how neighboring panels meet and how the strip pattern continues across a wall. Joint engagement, compatible connecting or fixing pieces and the resulting installed coverage are established for the selected assembly.
The selected laminate has a warm brown wood-grain appearance across the broad face strips. The grain follows the panel length, while the light-toned grooves create a narrow contrast between strips. A retained surface sample establishes the final brown tone and sheen for panels ordered together.
Small round holes repeat along the recessed channels, while the near end reveals the hollow profile beneath the decorated faces. These details belong to the selected panel. End covers and edge trims are specified where cut ends stay exposed in the wall layout.
Panel direction, end joints and corner returns affect the alignment of the flat strips and narrow channels. The wall elevation locates these transitions before quantities are finalized. Matching trims are scheduled with the selected laminated surface.
| Profile & material | GP-KJ210XY bamboo-fiber indoor wall panel with broad flat face strips and narrow perforated grooves |
|---|---|
| Selected surface | Warm brown wood-look laminated face with narrow light-toned perforated grooves on the GP-KJ210XY bamboo-fiber profile. Final color and sheen follow the selected sample. |
| Listed profile width | 220 mm; installed coverage after joint engagement given as its own figure |
| Listed length & thickness | 3000 mm length × 12 mm overall profile thickness |
| Manufacturing & edge details | Laminated face, hot and cold pressing, side slotting; hollow sections open at the cut end |
| Wall assembly | Backing, fixings, joint components, cut edges and corner trims selected for the wall layout |
| Use & test reports | Indoor decorative walls; acoustic, fire and emissions test reports available for the ordered panel |
| Minimum order | Supplied in full packing units from one production batch, rounded up from your area. Small lots can ship with the rest of your project list in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The 3000 mm supplied length is compared with the height or horizontal run of each panel location. The cutting layout identifies full lengths, shorter pieces, end joints and openings. Reusable offcuts and spare lengths are counted from this layout instead of applying an arbitrary allowance.
The listed 220 mm width describes the profile. Installed coverage depends on the engaged edge connection and is recorded as its own figure in the wall assembly. Wall-run quantities use that confirmed coverage together with the starting and finishing edge details.
The supporting wall, any battens and the panel fixings are specified together. Inside and outside corners, sockets, switches and access covers are marked on the wall elevation. Equipment and heavy fixtures need suitable support behind the decorative panel, with their connections coordinated at the finished face.
The panel line item identifies GP-KJ210XY, its listed 220 × 3000 × 12 mm format, the warm brown laminated surface and the number of pieces. Cut-length requirements and the spare pieces ordered complete the panel schedule. Finished wall area and panel-piece quantity remain two distinct figures.
Starting and finishing edges, internal and external corners, and cutout surrounds create distinct accessory requirements. Our quote identifies each trim or joint component by type, finish and quantity. These items are matched to the selected profile and wall detail.
Backing materials, battens, anchors and compatible panel fixings are itemized next to the decorative profiles. Wall preparation, cutting, adjustments around electrical fittings and installation labor form the site work. The order makes clear which components are supplied with the panels.
The selected surface, piece count and destination are recorded for the order. Packing addresses the 3000 mm lengths, laminated faces and formed panel edges. Package dimensions, freight and handling arrangements are stated with the supply quotation. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The profile is listed as 220 mm wide, 3000 mm long and 12 mm thick overall. The thickness describes the complete profile, while the 220 mm width remains separate from the installed coverage of an engaged joint. Cut lengths and order quantities follow the wall elevation.
Broad, flat strips carry the warm brown wood-look laminate. Narrow, light-toned recesses run between them and contain repeating small round holes. The body is specified as bamboo fiber.
Use the confirmed installed coverage of the selected joint to count pieces across each wall run. Then compare the required panel lengths with the 3000 mm supplied length and prepare a cutting layout. Openings, corners, reusable offcuts and spare pieces are then added, because the nominal profile width alone cannot give a final count.
No. If a project has a sound-absorption target, the required report must identify the actual panel, backing and installation arrangement.
The wall detail specifies covers or trims for exposed ends, corners and cutout edges. Their profile, finish and quantities are included in the accessory schedule. The 12 mm panel thickness and any backing depth both affect these edge conditions.
Provide the wall elevations, required lengths, selected warm brown wood-look surface, piece quantities and delivery destination. The quote separates panels from joint components, trims, backing and fixings, and states packing and freight. Any required acoustic, fire or emissions documentation is identified for the actual ordered assembly.
GP-KJ208GS WPC Wall Panels with Two Tall Ribs
JT204 Inward-Round WPC Wave Wall Panels, 12 mm
Indoor Fluted WPC Wall Panels
JT159 Mixed-Rib WPC Wall Panels, 14 mm