JT204 inward-round wave face
JT204 inward-round wave has shallow concave channels repeated across a 204 mm overall panel width. The complete profile is 12 mm thick. Its channel face differs from raised half-round ribs, so the model name and section identification stay together in the material order.
Wood-plastic composites form the listed body material. The product is listed with a laminated surface, hot and cold pressing, and side slotting. The curved cut edge shows on the short samples, and exposed ends get a coordinated termination so the profile edge is finished.
The JT204 reference also covers a 30 mm half-circle model. This page covers the 12 mm inward-round version, with channels opening toward the face. Overall thickness and the actual face geometry identify the selected product.
The selected white direction keeps the curved face visually continuous across the panel. The accepted face reference and sheen govern the order, with exposed trims coordinated to the same selection. Joint and cut-end samples show how the white surface meets the adjoining finish.
The wood-look direction introduces a tan grain appearance on the same 12 mm WPC profile. It remains a laminated composite panel, with the actual pattern and sheen fixed by the face sample. Grain direction and panel sequencing follow the wall elevation.
A repeated channel face draws attention to seam position and the last channel at a corner. The sample arrangement includes two joined panels and the chosen return detail. Panel labels, face reference and trim schedule keep the finished wall field coordinated.
| Model / material | JT204 inward-round wave panel, 12 mm version; Wood-Plastic Composites with laminated face. |
|---|---|
| Laminated face | JT204 inward-round wave, 204 × 12 × 3000 mm, with a selected white laminated face; final color reference and sheen by sample. |
| Overall dimensions | 204 mm overall width × 12 mm overall thickness × 3000 mm standard length. |
| Face / process | Repeated concave channels; laminated surface, hot and cold pressing, side slotting. Separate from JT204 30 mm half-circle profile. |
| Setout / cut lengths | Installed pitch by joined sample. Channel alignment, end joints, returns, opening cuts and finished lengths by elevation. |
| Support / interfaces | Backing, fixings and movement allowance by actual wall. Mounting depth and adjacent material junctions each scheduled. |
| Supply | Panels, samples, trims and cut pieces; support materials, packing, freight, site preparation and installation individually scheduled. |
| Minimum order | Supplied in full packing units from one production batch, rounded up from your area. Small lots can ship with the rest of your project list in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The listed 204 mm is overall width. The accepted side joint establishes installed pitch and the visual transition between neighboring channel faces. Wall quantities follow that pitch, opening cuts and the first and last panel positions, without assuming that overall width equals net cover.
The standard listed length is 3000 mm. Full-height pieces, shorter cuts and any butt joints are assigned on the elevation. A joint between panel lengths requires its own support and finish detail so channel alignment and exposed cut edges are resolved together.
The substrate, fixing arrangement and movement allowance are selected for the wall location and run direction. Junctions at stone, cabinetry, doors and service plates need the full 12 mm envelope plus any chosen backing or mounting depth. Attached fixtures are supported independently of the decorative face.
Our quotation identifies JT204 inward-round, 12 mm, with actual face reference and piece counts by finished length. The 30 mm half-circle product is a different profile. Color alternatives remain within the same 12 mm inward-round panel order.
Joined samples, perimeter trims, corner parts and exposed-end work are distinct items. Their quantities depend on the wall perimeter and cut layout as well as square area. Service openings and narrow end pieces are carried on the same cutting schedule.
Panel support and fixing materials are named in the quote when included. Wall leveling, local preparation and installation labor remain their own quote lines.
The face sample, panel labels and protection for the curved edges belong to the order record. Shipment weight and carton sizes are confirmed for the actual length mix. MOQ, production timing, freight and site delivery conditions are quoted for the project destination. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
This is the 12 mm JT204 inward-round wave panel. Repeated concave channels open toward the face. The JT204 30 mm half-circle model, listed on its own page, has broad raised arches and a different section; the profile name and thickness identify the order.
The standard panel is 204 mm overall wide, 12 mm overall thick and 3000 mm long. Those are the outside size references. The accepted joined sample establishes installed pitch; cut lengths and the number of panels follow the wall elevation.
Two joined panels establish the side engagement and the transition between their channel faces. The setout carries that module across the wall, with corner positions and cut end panels resolved together, and net coverage comes from that joined module.
No. They use the same 12 mm inward-round panel envelope, while the trim finish follows the selected face reference. A corner or end trim also needs the agreed geometry and mounting detail.
No. This selection is for interior decorative wall facing. Exterior exposure, direct wet-area lining and any required rated assembly need a product and joint system specified for those conditions.
List each wall field, run direction, finished lengths, openings, corners and exposed ends. Add the chosen face reference and destination. Panels, joint samples, trims, backing, fixing materials, packing and freight remain separate lines so the same profile carries through every wall.
GP-KJ195HC Bamboo-Fiber Wall Panels with Broad Ribs
GP-JT159BYGS WPC Wall Panels with Rounded Ribs
GP-JT170HC WPC Wall Panels with Raised Ribs
JT Single-Wave WPC Wall Panels, 50, 70 & 130 mm