Calacatta Gold surface detail
Calacatta Gold has a white background with gray and warm gold vein movement. A close surface detail shows the color relationship, while each selected slab has its own distribution of lines and open white areas. The material name identifies the stone selection.
The selected slabs establish the visual layout before the cut pieces are scheduled. For a large feature wall, prominent veins and quieter white areas are placed across the elevation. A countertop and adjoining splash can use the same material selection while retaining separate piece sizes and joint positions.
Calacatta Gold can be cut to the project dimensions for walls, floors, countertops and other interior pieces. Length, width, thickness, edge work and openings are recorded by piece. The finished-piece size is separate from the size and usable area of the slab chosen for fabrication.
Polished Calacatta Gold has a glossy surface that reflects room light and emphasizes the gray and gold vein pattern. It suits a wall or countertop where a reflective stone surface is part of the design. Light positions and the viewing angle affect how much reflection crosses the white ground.
Honed Calacatta Gold has a smooth, lower-sheen surface. Choose it when the white ground and vein layout should carry the design with fewer sharp reflections. Honed is a smooth finish, so for floors we check slip performance for the stone and installation.
Care calls for a pH-neutral stone cleaner, prompt spill removal and no acidic or abrasive products. Sealing and ongoing care depend on the finish and application, and are recorded with the surface selection.
| Named material | George Stone Calacatta Gold; natural marble |
|---|---|
| Stone & surface selection | Calacatta Gold natural marble; polished or honed finish and project-specific thickness selected for the order |
| Color & veining | A white ground crossed by gray and warm gold veins; natural differences between selected slabs |
| Explicit finish choices | Polished or honed; selected finish and treated faces recorded with the order |
| Dimensions & thickness | Cut to project dimensions; customizable thickness. Actual slab and finished-piece dimensions agreed for the order. |
| Applications & interfaces | Walls, floors, countertops and custom interior pieces; edges, joints, openings and supports specified for the actual installation |
| Supply & fabrication | Material, pieces, cut sizes, exposed edges, openings, finish, packing and freight, each itemized |
| Minimum order | Made to your project quantities. Small item counts are accepted when they ship with the rest of your project list; the quotation confirms the quantity for each item. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The elevation places the chosen slab faces, panel joints and vein direction together. Veins can become prominent at panel boundaries, so the order fixes the intended sequence, and a mirrored or bookmatched effect needs a matched pair selected for it.
Counter pieces, backsplashes and side returns each have their own dimensions and edge details, and basin, sink or appliance openings follow the fixture drawings. Supports, unsupported spans and attachment details are resolved for the complete assembly.
Floor quantities are taken from the finished room layout and the chosen cut sizes. Joint positions, doorway cuts, adjoining floor levels and any movement details belong to the installation design. The selected finish and required floor documentation are confirmed for the intended location.
Slab selection and the desired vein arrangement affect the material takeoff. A large uninterrupted white area, matching adjoining panels or a selected pair can change which slabs are used and the available cutting layout.
The quote lists each piece and its thickness, with exposed edges, corners, returns and openings as fabrication details, all taken from your order.
Polished or honed finish is named with the material. Countertops, wall panels, floor pieces and splashes are counted one by one, so the finish and exposed faces are clear across the package.
Packing follows the stone-piece dimensions and shipment contents, with crating, package weight, freight and unloading priced for the destination. Site measurement, support preparation, setting materials and installation are added when named in the quotation. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
It has a white ground with gray and warm gold vein movement. Individual slabs vary in the width, position and distribution of those markings. The selected slab images and surface sample establish the actual material appearance for the order.
The offer supports cutting to project dimensions and customizable thickness. Slab selection and the finished-piece schedule are confirmed together before fabrication.
Yes. Both polished and honed finishes are offered for this material, and the order names the finish, exposed faces and edge treatment. Other treatments are confirmed for this stone on request.
A vein layout can be arranged from selected slabs and cut pieces. The elevation records panel sequence and joint positions. A continuous or mirrored pattern depends on the actual selected material and cutting layout.
Only the items named in the quotation are included. Marble pieces, exposed edges and openings are itemized apart from sinks, basins, support structures, setting materials and site installation.
Use a pH-neutral stone cleaner, remove spills promptly and avoid acidic or abrasive products, following the stone care guidance. Sealing and maintenance arrangements depend on the selected surface finish and application.
Four-Piece Marble Bathtub Deck Surround Sets
Carrara White Marble for Project-Cut Interior Surfaces
Dark Emperador Marble Slabs
Bookmatched Marble Wall Slab Pair Sets