Sheer curtain appearance
The selected sheer is white 100% polyester voile in a plain weave. It forms a separate light-filtering layer across the glazed opening. The fabric lets daylight through while softening the view of the door, and it works independently of the blackout lining used with the outer drapes.
The center-opening pair has a triple-pinch heading with a 2.5:1 flat-fabric-fullness target. Flat fabric width is measured before the pleats; finished heading coverage is measured after pleating. Joins and panel widths are laid out with the fabric direction so repeated openings keep a consistent appearance.
The selected operating package uses hand-draw batons and heading hooks with compatible rod rings or track carriers. An exposed rod can be retained where specified; a ceiling aluminum track is the concealed-hardware alternative. The quote names the chosen support and its fixing components for each opening.
The base fabric is plain white polyester voile without a printed repeat. The fabric sample establishes its weave, hand and actual translucency. A decorative texture or color change receives a different textile reference, while a blackout layer is its own curtain item.
The selected heading is 4 in deep with a double-fold top, 1.5 in double-fold side hems and a 2 in double-fold bottom hem. The 2.5:1 fullness adds folds without changing the support span. Finished drop, joins and floor clearance are recorded for the actual opening.
| Curtain configuration | White sheer curtain pair, center-opening and made to the sliding-door opening |
|---|---|
| Selected curtain package | Selected white 100% polyester plain-weave voile pair, triple-pinch heading at 2.5:1 fabric fullness and manual baton draw; made to the opening |
| Fabric specification | Selected 100% polyester plain-weave voile, plain white; sample-approved texture and translucency, with no numerical privacy or light-transmission rating |
| Finished dimensions | Triple-pinch heading at 2.5:1 fabric fullness; finished heading width and drop by measured opening |
| Fabrication details | 4 in double-fold heading; 1.5 in double-fold side hems; 2 in double-fold bottom hem; joins and fabric direction scheduled |
| Door & support interfaces | Manual baton draw; compatible heading hooks and rod rings or track carriers; support type, stacking and door/handle clearance identified per opening |
| Package contents | Fabric curtains and fabrication; rod/track/control parts, packing, freight, measurement and installation each identified |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open sheer-curtain specification diagram ↗
The support span, meeting overlap and returns establish finished heading coverage. The selected 2.5:1 fullness uses 2.5 times that coverage in flat fabric before seam and cutting allowances. Finished drop is taken from the chosen carrier or ring datum to the agreed lower edge.
Curtains drawn to one side gather in one stack; a center split places fabric at both ends of the support run. Those layouts affect the usable door opening differently. The room plan places the stack clear of the active sliding leaf, handles and access route, using the actual fabric and heading to size the stack.
The support height and curtain attachment establish the finished drop. Floor level, door threshold and any nearby heating or ventilation components are included in the layout. Wall or ceiling fixing conditions and the selected hardware capacity are resolved for that installation.
The base material is white 100% polyester plain-weave voile. Our quote identifies the actual fabric reference and sample; a different color, textured weave or printed design is priced as its own material selection.
The base fabrication is a center-opening pair, triple-pinch heading, 2.5:1 fullness and the selected hems. Width and drop remain made to opening, with joins and fabric direction included in the cutting layout.
Supporting hardware is priced on its own line, including the chosen run, connections and controls where supplied. Motorized operation or a specific draw-control type requires its own selection.
Curtain quantities and any separate hardware define the shipment. Packing and freight follow the order and destination. Site measurement, support installation, electrical work and curtain hanging are separate responsibilities unless expressly included. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
No. The custom offer accepts opening width and height along with rod or track dimensions. For a sliding door, the curtain layout also records handle access, the active opening and where the fabric gathers. The quotation defines the actual finished sizes for each opening.
No. A sheer transmits light. With the room lit after dark, visibility through the fabric can differ from the daytime appearance. Where more separation or light blocking is needed, an outer curtain can be added and paired with the sheer layer.
The selected base textile is white 100% polyester plain-weave voile. Its sample establishes texture and translucency. A cotton, linen or mixed-fiber alternative is a fabric change with its own reference.
The selected arrangement is a center-opening pair. Finished heading coverage includes overlap and returns, and the 2.5:1 fullness sets its flat-fabric allowance. A one-way draw changes panel distribution and stacking, so it receives a revised panel schedule.
The base operation is manual baton draw. Heading hooks connect to compatible rod rings or track carriers, and the quote names the selected support. A motorized track is a system change with its own components and power supply.
It sets the flat fabric width at 2.5 times finished heading coverage before seams and cutting allowances. The extra width forms the pleats and soft folds.
Mesh-Header Room-Divider Curtains
Recessed Manual Double Curtain Tracks
Motorized Split-Draw Curtain Track
Custom Blackout Curtains for Sliding Glass Doors