LED flood-head appearance
The selected flood-head design retains the die-cast aluminum housing from the offered family. The procurement specification selects 100 W luminaire input power and a 4000 K LED color-temperature target. The actual proposed head and driver are identified against those requirements before the lighting layout is released.
The selected optical requirement is a nominal 120° full-angle wide distribution, defined between the 50% center-beam intensity directions in the principal planes. Head aiming, mounting height and quantity follow the actual photometric file. Multiple heads, a cross-arm and a pole are each counted on the order when required.
The base control is simple on/off switching. A photocell remains an optional component, matched to the driver and switching circuit. The selected electrical requirement is a 220–240 V AC, 50/60 Hz driver package; a different destination supply receives a revised driver and connection schedule.
Black-finished die-cast aluminum is the selected housing direction. The quoted head identifies the coating, optical cover and mounting yoke. Corrosion, impact and outdoor-enclosure documents belong to the actual assembly and are not inferred from the black finish.
The selected color target is 4000 K. Nominal 120° wide distribution is an optical procurement requirement. The final head’s photometric file supplies the distribution used for aiming and site calculations.
| Fixture type | Outdoor LED flood head with a die-cast aluminum housing |
|---|---|
| Head & control selection | Selected die-cast aluminum LED flood-head design: 100 W input-power target, 4000 K CCT target and nominal 120° wide distribution, on/off control; driver, photometry and IP65 evidence required for supplied head |
| Lighting selection | Selected design targets: 100 W luminaire input power, 4000 K CCT and nominal 120° full-angle wide distribution; final output/distribution from matched photometry |
| Optional control | On/off switching in base package; compatible photocell when selected as an option |
| Electrical specification | Selected driver requirement: 220–240 V AC, 50/60 Hz; actual driver, earthing/insulation arrangement and connection details required for proposed head |
| Mounting interfaces | Head dimensions/weight, actual bracket, aiming arrangement, support/fixing design and any pole or arm supplied as an extra |
| Documentation & supply | IP65 under IEC 60529 procurement acceptance requirement; model-matched enclosure, electrical and photometric documents required |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open floodlight specification diagram ↗
The selected head has 100 W input-power, 4000 K and nominal 120° wide-distribution targets. Actual lumens, intensity distribution, head dimensions and mass come from the proposed assembly’s documents. A lighting calculation uses that photometry with the mounting height and illuminated area.
The head-to-support connection is coordinated with the selected bracket, mounting surface and actual fixing design. A wall, pole or arm is a separate support selection. Head weight, permitted aiming and attachment details are confirmed for the quoted fixture and support.
Supply voltage and frequency, driver selection, switching and any photocell are identified as a compatible electrical package. Cable routing and connection points follow the actual fixture instructions and site design. Wiring, power distribution and electrical installation are quoted as site work.
The base quotation is per selected 100 W flood head against the 4000 K and nominal 120° optical requirements. The head reference, driver and required technical documents are identified; poles, cross-arms and spare heads have separate quantities.
An optional photocell and any related switching parts are separate selections. Their compatibility and operating behavior are recorded with the driver and supply.
The actual bracket, attachment components and any supplied pole or arm are named individually. Model-matched enclosure, electrical and photometric documents are required for acceptance against the selected flood-head specification.
Packing and freight follow the fixture quantities and destination. Site supports, wiring, power distribution, lifting and installation labor have their own stated responsibilities. The quote distinguishes supplied lighting components from the installed lighting system. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The selected procurement design is a 100 W LED flood head with a 4000 K CCT target and nominal 120° wide distribution. These are requirements for the proposed assembly. Lumen output, actual intensity distribution and dimensions must come from its matching technical data.
The base package is on/off switching. A photocell can be added as a separate compatible control item. The quotation names its switching behavior, connection and driver compatibility.
IP65 under IEC 60529 is the selected acceptance requirement for the complete head. Matching enclosure documentation must identify the complete head supplied against that requirement. Site cable joints and connection enclosures have separate exposure requirements.
The selected driver requirement is 220–240 V AC, 50/60 Hz. The quoted driver and complete electrical assembly must match the project supply and local requirements. A 120 V or other supply needs its own matched package.
No fixed spacing or illuminated area follows from 100 W input power or nominal 120° distribution. Actual photometry, mounting height, tilt and the required light levels establish the lighting plan. The final proposed head needs a matching photometric file.
The product image shows a multi-head support arrangement, while the base quotation is per flood head. Poles, cross-arms, mounting hardware, site cabling, foundations and installation are named and priced line by line.
YY8201-12W In-Ground LED Uplight
100 mm Aluminum Outdoor Wall Lights
YY8029 Outdoor Wall Light with a Broad Luminous Face
YY8086-3W Louvered LED Step Light