Single sliding wood door
The single leaf slides across the face of the wall, with no swing into the room and no wall pocket. A flat vertical-grain face and recessed black pull keep the surface clean, and the leaf covers the opening plus a side overlap, so it needs clear wall beside the passage to park when open.
The surface-mounted top-track package includes twin ball-bearing hangers, anti-jump blocks and travel stops. The selected powder-coated carbon-steel track supports the door through its wall fixings; the pull is not part of that support. Track and roller selection follow the complete leaf weight and thickness, including its face, edges and hardware.
A floor guide controls the bottom of the moving leaf. The guide and any bottom preparation must work together through the full travel. Optional soft-close dampers are matched to the door’s weight and closing direction, with access retained for adjustment and replacement.
The 35 mm package pairs a honeycomb-paper core with a melamine face. It is the lighter construction choice for an interior opening with modest privacy demands. Hanger fixings need their designated reinforcement; a thin face skin is not a fixing substrate. It is not presented as a solid-wood leaf or a rated acoustic door.
The 40 mm package uses a tubular particleboard core, solid-wood edge strips and natural oak veneer over HDF. It gives the flat panel a real-wood face without describing the whole leaf as solid oak. Veneer grain, edge treatment and the recessed-pull preparation are coordinated across both sides of the door.
The 45 mm alternative uses a laminated solid-pine or LVL core with a walnut veneer face, and the schedule names which core you get. The extra thickness changes wall stand-off, guides, pull preparation and hardware compatibility.
| Door configuration | Single flat wood sliding leaf on a surface-mounted top track; vertical-grain face and recessed black pull |
|---|---|
| Leaf package | 35 mm leaf with a honeycomb-paper core and melamine face; a lighter construction for low-demand interior openings. |
| Leaf thickness & core | 35 mm honeycomb-paper; 40 mm tubular particleboard with solid-wood edges; 45 mm laminated pine or LVL alternatives |
| Track & hardware | Powder-coated carbon-steel top track; twin ball-bearing hangers, anti-jump blocks, floor guide and stops; optional soft close |
| Face materials | 35 mm melamine face; 40 mm natural oak veneer over HDF; 45 mm selected walnut veneer with its own face substrate named in the door schedule. |
| Opening & leaf dimensions | Project width and height in mm; opening, leaf overlap, wall parking, track length, stand-off and floor clearance all scheduled |
| Hardware compatibility | Track and guide selected for actual leaf weight, thickness and dimensions; wall fixing and headroom resolved for the installation |
| Minimum order | Made to your project quantities. Small item counts are accepted when they ship with the rest of your project list; the quotation confirms the quantity for each item. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The closed leaf needs overlap at the sides of the opening; the amount follows the selected hardware and trim arrangement. The open position needs clear wall length for the leaf and its stops. Light switches, wall lights, baseboards and furniture must remain outside that path. A door wider than the opening can still leave a restricted passage if the pull or stop limits travel.
Track fixings go into structural backing suited to the wall, behind the surface board. Headroom must take the track, hangers, adjustment space and any soft-close mechanism, and door casing can call for extra stand-off so the leaf clears the trim. Brackets and anchors are chosen for the wall construction and the full assembly weight.
The floor guide position follows the actual leaf thickness and travel path. Finished floor levels determine the bottom clearance; rugs and thresholds must not catch the moving leaf. A surface-sliding door has perimeter gaps and is not an acoustic, airtight or bathroom privacy-rated assembly merely because the core is heavier.
The quote names the selected 35, 40 or 45 mm construction, actual core and face material. Width, height, veneer selection and edge work affect the leaf price. A melamine face, oak veneer over HDF and walnut veneer are distinct finishes with different fabrication work.
The hardware line lists the track, two hangers, anti-jump blocks, stops and floor guide, with soft close, stainless track components or other rollers as options. We check the full leaf weight against the rating of the hardware package you choose.
The recessed pull and its position are part of the leaf preparation, and a second-side pull, privacy latch or special bottom preparation is added where selected. Wall reinforcement, anchors, trim changes and electrical relocation are installation work unless specifically included.
The packing list pairs the leaf with its track and hardware set and records the opening label and slide direction, and edges and veneer faces are protected for transport. Delivery, unloading and site fitting are listed apart from the supplied door components. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
It is a wall-mounted sliding door. The leaf parks across the face of the adjacent wall and runs on a surface-mounted top track. It does not include an in-wall pocket frame or require a hollow wall cavity.
The 35 mm honeycomb and melamine package is the lighter interior choice. The 40 mm tubular-core package adds solid-wood edges and an oak veneer face over HDF, and the 45 mm laminated-core package suits a larger leaf, with pine or LVL named in the schedule. Hardware is matched to the weight of the package you choose.
The wall must allow the complete leaf to park far enough to clear the intended passage. Leaf width, overlap, stop position and pull projection determine that travel. The configuration drawing separates the opening from the parking zone so wall switches, furniture and trim can be coordinated.
The set comprises a top track, twin ball-bearing hangers, anti-jump blocks, stops and a floor guide, with the recessed pull listed with the door. Soft close and alternative track materials are options, and wall anchors and reinforcement are defined for your wall.
Yes, soft close is an option in the hardware package. The damper must suit the complete leaf weight, track and required closing direction.
No. A surface-mounted sliding leaf has clearances around its edges. Side overlap can limit sightlines. If the room needs a specified privacy, sound or smoke-control performance, the complete door and sealing assembly needs a suitable separate specification.
White Horizontal-Groove HDF Interior Door
Oak-Veneered Solid-Core Flush Interior Door
Timber Interior Doors with Reeded-Glass Panels
Two-Panel Wood Interior Door with Engineered Stiles